180-pin HSEC8 Edge Card Interface – Allows for compatibility with all of
C2000’s 120 or 180-pin controlCARDs. Some controlCARDs have 180 pins/fingers and
connect to both connectors on the Docking Station. Others have 120 pins/fingers
and connect only to the bigger connector.
Key Signal Breakout – Most GPIO, ADC and other key
signals are routed from the 180-pin HSEC8 connector to header pins (J4, J5 for
Analog; J6, J7, J8, J9 for GPIO; J27 for FSI prototyping is available on
revision F and forward.). The HSECDOCK also features through-hole prototyping
vias