SPRUIM2H May 2020 – October 2023 AM2431 , AM2432 , AM2434 , AM6411 , AM6412 , AM6421 , AM6422 , AM6441 , AM6442
This section describes the GTC integration in the device, including information about clocks, resets, and hardware requests.
Figure 12-2407 shows the GTC integration.
Table 12-4582 through Table 12-4585 summarize the GTC integration.
Module Instance | Power Sleep Controller | Power Domain | Module Domain | Interconnect |
---|---|---|---|---|
GTC0 | PSC0 | PD0 | LPSC0 | CBASS0 |
Module Instance | Module Clock Input | Source Clock Signal | Source | Description |
---|---|---|---|---|
GTC0 | GTC_CLK | MAIN_PLL2_HSDIV5_CLKOUT(1) | PLL2 | Module functional (counter) clock. Source clock selection is done through a mux which is controlled via CTRLMMR_GTC_CLKSEL[2-0] CLK_SEL register bit field. |
MAIN_PLL0_HSDIV6_CLKOUT | PLL0 | |||
CP_GEMAC_CPTS0_RFT_CLK | I/O pin | |||
CPTS0_RFT_CLK | I/O pin | |||
MCU_EXT_REFCLK0 | I/O pin | |||
EXT_REFCLK1 | I/O pin | |||
SERDES0_IP1_LN0_TXMCLK | SERDES0, IP1, lane 0 | |||
MAIN_SYSCLK0 | PLLCTRL0 | |||
GTC0 | GTC_VBUSP_CLK | MAIN_SYSCLK0/4 | PLLCTRL0 | Module interface clock. |
Module Instance | Module Reset Input | Source Reset Signal | Source | Description |
---|---|---|---|---|
GTC0 | GTC_POR_RST | MOD_POR_RST | LPSC0 | Module reset. Affects counter and MMR logic. |
GTC_SYS_RST | POR_BOOT_CFG_RST | PLLCTRL0 | POR that is unstretched and not delayed by any sequential logic. Used for boot config to sample device pins. |
Module Instance | Module Sync Output | Destination Sync Input | Destination | Description | Type |
---|---|---|---|---|---|
GTC0 | GTC0_GTC_PUSH_EVENT_0 | TIMESYNC_INTRTR0_IN_36 | TIMESYNC_INTRTR0 | GTC hardware push event | Pulse |