Figure 12-1278 shows the integration of the SERDES0 module in the device.
Table 12-2523 through Table 12-2526 summarize the integration of SerDes in device MAIN domain.
Table 12-2523 SerDes Integration Attributes
Module Instance |
Power Sleep
Controller |
Power Domain |
Module Domain |
Interconnect |
SERDES0 | PSC0 | PD0 | LPSC15 | CBASS0 |
Table 12-2524 SerDes Clocks
Module Instance |
Module Clock Input |
Source Clock Signal |
Source |
Description |
SERDES0 | SERDES0_ICLK | MAIN_SYSCLK0/4 | PLL_CTRL0 | VBUS interface clock |
| CMN_REFCLK_INT | WKUP_HFOSC0_CLKOUT | WKUP_HFOSC0 | Internal reference clock from device sources. Software selectable. See Section 12.2.3.3.1.2 |
| | HFOSC1_CLKOUT | HFOSC1 |
| | MAIN_PLL0_HSDIV8_CLKOUT | PLL0 |
| | MAIN_PLL2_HSDIV4_CLKOUT | PLL2 |
Table 12-2525 SerDes Resets
Module Instance |
Module Reset Input |
Source Reset Signal |
Source |
Description |
SERDES0 |
SERDES0_RST |
MOD_G_RST |
LPSC15 |
Serdes LPSC reset |
Table 12-2526 SerDes Hardware Requests
Module Instance |
Module Interrupt Signal |
Destination Interrupt Input |
Destination |
Description |
Type |
SERDES0 | PHY_PWR_TIMEOUT_LVL_0 | GICSS0_SPI_IN_142 | GICSS0 | Lane power timeout interrupt | Level |
| | R5FSS0_CORE0_INTR_IN_180 | R5FSS0_CORE0 | | |
| | R5FSS0_CORE1_INTR_IN_180 | R5FSS0_CORE1 | | |
| | R5FSS1_CORE0_INTR_IN_180 | R5FSS1_CORE0 | | |
| | R5FSS1_CORE1_INTR_IN_180 | R5FSS1_CORE1 | | |
Table 12-2527 SerDes DMA Events
Module Instance |
Module DMA Event |
Destination DMA Event Input |
Destination |
Description |
Type |
SERDES0 |
- |
- |
- |
No PDMA channels to external DMA engines |
- |
Note: For more information on the interconnects in device, see Chapter 3, System Interconnects.
For more information on the power, reset and clock management in device MAIN domain, see the corresponding sections within Chapter 5, Device Configuration.