SPRUIZ1B July   2023  – August 2024 TMS320F28P650DH , TMS320F28P650DK , TMS320F28P650SH , TMS320F28P650SK , TMS320F28P659DH-Q1 , TMS320F28P659DK-Q1 , TMS320F28P659SH-Q1

 

  1.   1
  2.   Read This First
    1.     About This Manual
    2.     Notational Conventions
    3.     Glossary
    4.     Related Documentation From Texas Instruments
    5.     Support Resources
    6.     Trademarks
  3. 1 C2000™ Microcontrollers Software Support
    1. 1.1 Introduction
    2. 1.2 C2000Ware Structure
    3. 1.3 Documentation
    4. 1.4 Devices
    5. 1.5 Libraries
    6. 1.6 Code Composer Studio™ Integrated Development Environment (IDE)
    7. 1.7 SysConfig and PinMUX Tool
  4. 2 C28x Processor
    1. 2.1 Introduction
    2. 2.2 C28X Related Collateral
    3. 2.3 Features
    4. 2.4 Floating-Point Unit (FPU)
    5. 2.5 Trigonometric Math Unit (TMU)
    6. 2.6 VCRC Unit
  5. 3 C28x System Control and Interrupts
    1. 3.1  C28x System Control Introduction
      1. 3.1.1 SYSCTL Related Collateral
    2. 3.2  System Control Functional Description
      1. 3.2.1 Device Identification
    3. 3.3  Resets
      1. 3.3.1  Reset Sources
      2. 3.3.2  External Reset (XRS)
      3. 3.3.3  Simulate External Reset (SIMRESET.XRS)
      4. 3.3.4  Power-On Reset (POR)
      5. 3.3.5  Debugger Reset (SYSRS)
      6. 3.3.6  Simulate CPU1 Reset (SIMRESET)
      7. 3.3.7  Watchdog Reset (WDRS)
      8. 3.3.8  NMI Watchdog Reset (NMIWDRS)
      9. 3.3.9  Secure Code Copy Reset (SCCRESET)
      10. 3.3.10 EtherCAT SubDevice Controller (ESC) Module Reset Output
    4. 3.4  Peripheral Interrupts
      1. 3.4.1 Interrupt Concepts
      2. 3.4.2 Interrupt Architecture
        1. 3.4.2.1 Peripheral Stage
        2. 3.4.2.2 PIE Stage
        3. 3.4.2.3 CPU Stage
        4. 3.4.2.4 Dual-CPU Interrupt Handling
      3. 3.4.3 Interrupt Entry Sequence
      4. 3.4.4 Configuring and Using Interrupts
        1. 3.4.4.1 Enabling Interrupts
        2. 3.4.4.2 Handling Interrupts
        3. 3.4.4.3 Disabling Interrupts
        4. 3.4.4.4 Nesting Interrupts
      5. 3.4.5 PIE Channel Mapping
        1. 3.4.5.1 PIE Interrupt Priority
          1. 3.4.5.1.1 Channel Priority
          2. 3.4.5.1.2 Group Priority
      6. 3.4.6 System Error Interrupts
      7. 3.4.7 Vector Tables
    5. 3.5  Exceptions and Non-Maskable Interrupts
      1. 3.5.1 Configuring and Using NMIs
      2. 3.5.2 Emulation Considerations
      3. 3.5.3 NMI Sources
        1. 3.5.3.1 Missing Clock Detection
        2. 3.5.3.2 RAM Uncorrectable Error
        3. 3.5.3.3 Flash Uncorrectable ECC Error
        4. 3.5.3.4 ROM Uncorrectable Error
        5. 3.5.3.5 NMI Vector Fetch Mismatch
        6. 3.5.3.6 CPU2 Watchdog or NMI Watchdog Reset
        7. 3.5.3.7 EtherCAT Reset Out
        8. 3.5.3.8 CRC Fail
        9. 3.5.3.9 ERAD NMI
      4. 3.5.4 Illegal Instruction Trap (ITRAP)
    6. 3.6  Safety Features
      1. 3.6.1 Write Protection on Registers
        1. 3.6.1.1 LOCK Protection on System Configuration Registers
        2. 3.6.1.2 EALLOW Protection
      2. 3.6.2 CPU1 and CPU2 ePIE Vector Address Validity Check
      3. 3.6.3 NMIWDs
      4. 3.6.4 ECC and Parity Enabled RAMs, Shared RAMs Protection
      5. 3.6.5 ECC Enabled Flash Memory
      6. 3.6.6 ERRORSTS Pin
    7. 3.7  Clocking
      1. 3.7.1 Clock Sources
        1. 3.7.1.1 Primary Internal Oscillator (INTOSC2)
        2. 3.7.1.2 Backup Internal Oscillator (INTOSC1)
        3. 3.7.1.3 External Oscillator (XTAL)
        4. 3.7.1.4 Auxiliary Clock Input (AUXCLKIN)
      2. 3.7.2 Derived Clocks
        1. 3.7.2.1 Oscillator Clock (OSCCLK)
        2. 3.7.2.2 System PLL Output Clock (PLLRAWCLK)
        3. 3.7.2.3 Auxiliary Oscillator Clock (AUXOSCCLK)
        4. 3.7.2.4 Auxiliary PLL Output Clock (AUXPLLRAWCLK)
      3. 3.7.3 Device Clock Domains
        1. 3.7.3.1 System Clock (PLLSYSCLK)
        2. 3.7.3.2 CPU Clock (CPUCLK)
        3. 3.7.3.3 CPU Subsystem Clock (SYSCLK and PERx.SYSCLK)
        4. 3.7.3.4 Low-Speed Peripheral Clock (LSPCLK and PERx.LSPCLK)
        5. 3.7.3.5 USB Auxiliary Clock (AUXPLLCLK)
        6. 3.7.3.6 CAN Bit Clock
        7. 3.7.3.7 CPU Timer2 Clock (TIMER2CLK)
      4. 3.7.4 External Clock Output (XCLKOUT)
      5. 3.7.5 Clock Connectivity
      6. 3.7.6 Using an External Crystal or Resonator
        1. 3.7.6.1 X1/X2 Precondition Circuit
      7. 3.7.7 PLL/AUXPLL
        1. 3.7.7.1 System Clock Setup
        2. 3.7.7.2 USB Auxiliary Clock Setup
        3. 3.7.7.3 SYS PLL/AUX PLL Bypass
      8. 3.7.8 Clock (OSCCLK) Failure Detection
        1. 3.7.8.1 Missing Clock Detection Logic
    8. 3.8  Clock Configuration Semaphore
    9. 3.9  32-Bit CPU Timers 0/1/2
    10. 3.10 Watchdog Timers
      1. 3.10.1 Servicing the Watchdog Timer
      2. 3.10.2 Minimum Window Check
      3. 3.10.3 Watchdog Reset or Watchdog Interrupt Mode
      4. 3.10.4 Watchdog Operation in Low-Power Modes
      5. 3.10.5 Emulation Considerations
    11. 3.11 Low-Power Modes
      1. 3.11.1 IDLE
      2. 3.11.2 STANDBY
      3. 3.11.3 HALT
    12. 3.12 Memory Controller Module
      1. 3.12.1  Dedicated RAM (Dx RAM)
      2. 3.12.2  Local Shared RAM (LSx RAM)
      3. 3.12.3  Global Shared RAM (GSx RAM)
      4. 3.12.4  CPU Message RAM (CPU MSG RAM)
      5. 3.12.5  CLA Message RAM (CLA MSGRAM)
      6. 3.12.6  CLA-DMA MSG RAM
      7. 3.12.7  Access Arbitration
      8. 3.12.8  Access Protection
        1. 3.12.8.1 CPU Fetch Protection
        2. 3.12.8.2 CPU Write Protection
        3. 3.12.8.3 CPU Read Protection
        4. 3.12.8.4 CLA Fetch Protection
        5. 3.12.8.5 CLA Write Protection
        6. 3.12.8.6 CLA Read Protection
        7. 3.12.8.7 DMA Write Protection
      9. 3.12.9  Memory Error Detection, Correction, and Error Handling
        1. 3.12.9.1 Error Detection and Correction
        2. 3.12.9.2 Error Handling
      10. 3.12.10 Application Test Hooks for Error Detection and Correction
      11. 3.12.11 ROM Test
      12. 3.12.12 RAM Initialization
    13. 3.13 JTAG
      1. 3.13.1 JTAG Noise and TAP_STATUS
    14. 3.14 Live Firmware Update (LFU)
      1. 3.14.1 LFU Background
      2. 3.14.2 LFU Switchover Steps
      3. 3.14.3 Device Features Supporting LFU
        1. 3.14.3.1 Multi-Bank Flash
        2. 3.14.3.2 PIE Vector Table Swap
        3. 3.14.3.3 LS0/LS1 RAM Memory Swap for CPU1
          1. 3.14.3.3.1 Applicability to CLA LFU
        4. 3.14.3.4 D2/D3 RAM Memory Swap for CPU2
        5. 3.14.3.5 Additional Points Pertaining to LS0/LS1 and D2/D3 RAM Memory Swap
      4. 3.14.4 LFU Switchover
      5. 3.14.5 LFU Resources
    15. 3.15 System Control Register Configuration Restrictions
    16. 3.16 MCU Configuration (MCUCNFx)
    17. 3.17 Software
      1. 3.17.1 SYSCTL Examples
        1. 3.17.1.1 Missing clock detection (MCD) - SINGLE_CORE
        2. 3.17.1.2 XCLKOUT (External Clock Output) Configuration - SINGLE_CORE
      2. 3.17.2 MEMCFG Examples
        1. 3.17.2.1 Correctable & Uncorrectable Memory Error Handling
        2. 3.17.2.2 Shared RAM Management (CPU1) - C28X_DUAL
        3. 3.17.2.3 Shared RAM Management (CPU2) - C28X_DUAL
      3. 3.17.3 NMI Examples
        1. 3.17.3.1 NMI handling - C28X_DUAL
        2. 3.17.3.2 Watchdog Reset - C28X_DUAL
      4. 3.17.4 TIMER Examples
        1. 3.17.4.1 CPU Timers - SINGLE_CORE
        2. 3.17.4.2 CPU Timers - SINGLE_CORE
      5. 3.17.5 WATCHDOG Examples
        1. 3.17.5.1 Watchdog - SINGLE_CORE
    18. 3.18 System Control Registers
      1. 3.18.1  SYSCTRL Base Address Table
      2. 3.18.2  LFU Base Address Table
      3. 3.18.3  CPUTIMER_REGS Registers
      4. 3.18.4  PIE_CTRL_REGS Registers
      5. 3.18.5  WD_REGS Registers
      6. 3.18.6  NMI_INTRUPT_REGS Registers
      7. 3.18.7  XINT_REGS Registers
      8. 3.18.8  SYNC_SOC_REGS Registers
      9. 3.18.9  CPU1_DMA_CLA_SRC_SEL_REGS Registers
      10. 3.18.10 CPU2_DMA_CLA_SRC_SEL_REGS Registers
      11. 3.18.11 DEV_CFG_REGS Registers
      12. 3.18.12 CLK_CFG_REGS Registers
      13. 3.18.13 CPU1_SYS_REGS Registers
      14. 3.18.14 CPU2_SYS_REGS Registers
      15. 3.18.15 CPU1_SYS_STATUS_REGS Registers
      16. 3.18.16 CPU2_SYS_STATUS_REGS Registers
      17. 3.18.17 CPU1_PERIPH_AC_REGS Registers
      18. 3.18.18 CPU2_PERIPH_AC_REGS Registers
      19. 3.18.19 MEM_CFG_REGS Registers
      20. 3.18.20 ACCESS_PROTECTION_REGS Registers
      21. 3.18.21 MEMORY_ERROR_REGS Registers
      22. 3.18.22 ROM_WAIT_STATE_REGS Registers
      23. 3.18.23 TEST_ERROR_REGS Registers
      24. 3.18.24 UID_REGS Registers
      25. 3.18.25 CPU1_LFU_REGS Registers
      26. 3.18.26 CPU2_LFU_REGS Registers
      27. 3.18.27 CPU1TOCPU2_IPC_REGS_CPU1VIEW Registers
      28. 3.18.28 CPU1TOCPU2_IPC_REGS_CPU2VIEW Registers
      29. 3.18.29 CPU2_DMA_CLA_SRC_SEL_REGS Registers
      30. 3.18.30 Register to Driverlib Function Mapping
        1. 3.18.30.1 ASYSCTL Registers to Driverlib Functions
        2. 3.18.30.2 CPUTIMER Registers to Driverlib Functions
        3. 3.18.30.3 MEMCFG Registers to Driverlib Functions
        4. 3.18.30.4 NMI Registers to Driverlib Functions
        5. 3.18.30.5 PIE Registers to Driverlib Functions
        6. 3.18.30.6 SYSCTL Registers to Driverlib Functions
        7. 3.18.30.7 WWD Registers to Driverlib Functions
        8. 3.18.30.8 XINT Registers to Driverlib Functions
  6. 4 ROM Code and Peripheral Booting
    1. 4.1 Introduction
      1. 4.1.1 ROM Related Collateral
    2. 4.2 Device Boot Sequence
    3. 4.3 Device Boot Modes
      1. 4.3.1 Default Boot Modes
      2. 4.3.2 Custom Boot Modes
    4. 4.4 Device Boot Configurations
      1. 4.4.1 Configuring Boot Mode Pins
      2. 4.4.2 Configuring Boot Mode Table Options
      3. 4.4.3 Boot Mode Example Use Cases
        1. 4.4.3.1 Zero Boot Mode Select Pins
        2. 4.4.3.2 One Boot Mode Select Pin
        3. 4.4.3.3 Three Boot Mode Select Pins
    5. 4.5 Device Boot Flow Diagrams
      1. 4.5.1 Boot Flow
      2. 4.5.2 Emulation Boot Flow
      3. 4.5.3 Standalone Boot Flow
    6. 4.6 Device Reset and Exception Handling
      1. 4.6.1 Reset Causes and Handling
      2. 4.6.2 Exceptions and Interrupts Handling
    7. 4.7 Boot ROM Description
      1. 4.7.1  Boot ROM Configuration Registers
        1. 4.7.1.1 GPREG2 Usage and MPOST Configuration
      2. 4.7.2  Booting CPU2
        1. 4.7.2.1 Boot Up Procedure
        2. 4.7.2.2 IPCBOOTMODE Details
        3. 4.7.2.3 Error IPC Command Table
      3. 4.7.3  Entry Points
      4. 4.7.4  Wait Points
      5. 4.7.5  Secure Flash Boot Mode
        1. 4.7.5.1 Secure Flash CPU1 Linker File Example
      6. 4.7.6  Memory Maps
        1. 4.7.6.1 Boot ROM Memory-Maps
        2. 4.7.6.2 Reserved RAM Memory-Maps
      7. 4.7.7  ROM Tables
      8. 4.7.8  Boot Modes and Loaders
        1. 4.7.8.1 Boot Modes
          1. 4.7.8.1.1 Flash Boot
          2. 4.7.8.1.2 RAM Boot
          3. 4.7.8.1.3 Wait Boot
          4. 4.7.8.1.4 Secure LFU Flash Boot
        2. 4.7.8.2 Bootloaders
          1. 4.7.8.2.1 SCI Boot Mode
          2. 4.7.8.2.2 SPI Boot Mode
          3. 4.7.8.2.3 I2C Boot Mode
          4. 4.7.8.2.4 Parallel Boot Mode
          5. 4.7.8.2.5 CAN Boot Mode
          6. 4.7.8.2.6 CAN-FD Boot Mode
          7. 4.7.8.2.7 USB Boot Mode
          8. 4.7.8.2.8 IPC Message Copy to RAM Boot
          9. 4.7.8.2.9 Firmware Update (FWU) Flash Boot
      9. 4.7.9  GPIO Assignments
      10. 4.7.10 Secure ROM Function APIs
      11. 4.7.11 Clock Initializations
      12. 4.7.12 Boot Status Information
        1. 4.7.12.1 Booting Status
        2. 4.7.12.2 Boot Mode and MPOST (Memory Power On Self-Test) Status
      13. 4.7.13 ROM Version
    8. 4.8 Application Notes for Using the Bootloaders
      1. 4.8.1 Bootloader Data Stream Structure
        1. 4.8.1.1 Data Stream Structure 8-bit
      2. 4.8.2 The C2000 Hex Utility
        1. 4.8.2.1 HEX2000.exe Command Syntax
    9. 4.9 Software
      1. 4.9.1 BOOT Examples
  7. 5 Dual Code Security Module (DCSM)
    1. 5.1 Introduction
      1. 5.1.1 DCSM Related Collateral
    2. 5.2 Functional Description
      1. 5.2.1 CSM Passwords
      2. 5.2.2 Emulation Code Security Logic (ECSL)
      3. 5.2.3 CPU Secure Logic
      4. 5.2.4 Execute-Only Protection
      5. 5.2.5 Password Lock
      6. 5.2.6 JTAGLOCK
      7. 5.2.7 Link Pointer and Zone Select
      8. 5.2.8 C Code Example to Get Zone Select Block Addr for Zone1
    3. 5.3 Flash and OTP Erase/Program
    4. 5.4 Secure Copy Code
    5. 5.5 SecureCRC
    6. 5.6 CSM Impact on Other On-Chip Resources
      1. 5.6.1 RAMOPEN
    7. 5.7 Incorporating Code Security in User Applications
      1. 5.7.1 Environments That Require Security Unlocking
      2. 5.7.2 CSM Password Match Flow
      3. 5.7.3 C Code Example to Unsecure C28x Zone1
      4. 5.7.4 C Code Example to Resecure C28x Zone1
      5. 5.7.5 Environments That Require ECSL Unlocking
      6. 5.7.6 ECSL Password Match Flow
      7. 5.7.7 ECSL Disable Considerations for any Zone
        1. 5.7.7.1 C Code Example to Disable ECSL for C28x Zone1
      8. 5.7.8 Device Unique ID
    8. 5.8 Software
      1. 5.8.1 DCSM Examples
        1. 5.8.1.1 Empty DCSM Tool Example
        2. 5.8.1.2 DCSM Memory partitioning Example
    9. 5.9 DCSM Registers
      1. 5.9.1 DCSM Base Address Table
      2. 5.9.2 DCSM_Z1_REGS Registers
      3. 5.9.3 DCSM_Z2_REGS Registers
      4. 5.9.4 DCSM_COMMON_REGS Registers
      5. 5.9.5 DCSM_Z1_OTP Registers
      6. 5.9.6 DCSM_Z2_OTP Registers
      7. 5.9.7 DCSM Registers to Driverlib Functions
  8. 6 Background CRC-32 (BGCRC)
    1. 6.1 Introduction
      1. 6.1.1 BGCRC Related Collateral
      2. 6.1.2 Features
      3. 6.1.3 Block Diagram
      4. 6.1.4 Memory Wait States and Memory Map
    2. 6.2 Functional Description
      1. 6.2.1 Data Read Unit
      2. 6.2.2 CRC-32 Compute Unit
      3. 6.2.3 CRC Notification Unit
        1. 6.2.3.1 CPU Interrupt and NMI
      4. 6.2.4 Operating Modes
        1. 6.2.4.1 CRC Mode
        2. 6.2.4.2 Scrub Mode
      5. 6.2.5 BGCRC Watchdog
      6. 6.2.6 Hardware and Software Faults Protection
    3. 6.3 Application of the BGCRC
      1. 6.3.1 Software Configuration
      2. 6.3.2 Decision on Error Response Severity
      3. 6.3.3 Decision of Controller for CLA_CRC
      4. 6.3.4 Execution of Time Critical Code from Wait-Stated Memories
      5. 6.3.5 BGCRC Execution
      6. 6.3.6 Debug/Error Response for BGCRC Errors
      7. 6.3.7 BGCRC Golden CRC-32 Value Computation
    4. 6.4 Software
      1. 6.4.1 BGCRC Examples
        1. 6.4.1.1 BGCRC CPU Interrupt Example
        2. 6.4.1.2 BGCRC Example with Watchdog and Lock
        3. 6.4.1.3 CLA-BGCRC Example in CRC mode
        4. 6.4.1.4 CLA-BGCRC Example in Scrub Mode
    5. 6.5 BGCRC Registers
      1. 6.5.1 BGCRC Base Address Table
      2. 6.5.2 BGCRC_REGS Registers
      3. 6.5.3 BGCRC Registers to Driverlib Functions
  9. 7 Control Law Accelerator (CLA)
    1. 7.1 Introduction
      1. 7.1.1 Features
      2. 7.1.2 CLA Related Collateral
      3. 7.1.3 Block Diagram
    2. 7.2 CLA Interface
      1. 7.2.1 CLA Memory
      2. 7.2.2 CLA Memory Bus
      3. 7.2.3 Shared Peripherals and EALLOW Protection
      4. 7.2.4 CLA Tasks and Interrupt Vectors
      5. 7.2.5 CLA Software Interrupt to CPU
    3. 7.3 CLA, DMA, and CPU Arbitration
      1. 7.3.1 CLA Message RAM
      2. 7.3.2 CLA Program Memory
      3. 7.3.3 CLA Data Memory
      4. 7.3.4 Peripheral Registers (ePWM, HRPWM, Comparator)
    4. 7.4 CLA Configuration and Debug
      1. 7.4.1 Building a CLA Application
      2. 7.4.2 Typical CLA Initialization Sequence
      3. 7.4.3 Debugging CLA Code
        1. 7.4.3.1 Software Breakpoint Support (MDEBUGSTOP1)
        2. 7.4.3.2 Legacy Breakpoint Support (MDEBUGSTOP)
      4. 7.4.4 CLA Illegal Opcode Behavior
      5. 7.4.5 Resetting the CLA
    5. 7.5 Pipeline
      1. 7.5.1 Pipeline Overview
      2. 7.5.2 CLA Pipeline Alignment
        1. 7.5.2.1 Code Fragment For MBCNDD, MCCNDD, or MRCNDD
        2.       383
        3. 7.5.2.2 Code Fragment for Loading MAR0 or MAR1
        4.       385
        5. 7.5.2.3 ADC Early Interrupt to CLA Response
      3. 7.5.3 Parallel Instructions
        1. 7.5.3.1 Math Operation with Parallel Load
        2. 7.5.3.2 Multiply with Parallel Add
      4. 7.5.4 CLA Task Execution Latency
    6. 7.6 Software
      1. 7.6.1 CLA Examples
        1. 7.6.1.1 CLA arcsine(x) using a lookup table (cla_asin_cpu01)
        2. 7.6.1.2 CLA arcsine(x) using a lookup table (cla_asin_cpu01)
        3. 7.6.1.3 CLA arctangent(x) using a lookup table (cla_atan_cpu01)
        4. 7.6.1.4 CLA background nesting task
        5. 7.6.1.5 Controlling PWM output using CLA
        6. 7.6.1.6 Just-in-time ADC sampling with CLA
        7. 7.6.1.7 Optimal offloading of control algorithms to CLA
        8. 7.6.1.8 Handling shared resources across C28x and CLA
    7. 7.7 Instruction Set
      1. 7.7.1 Instruction Descriptions
      2. 7.7.2 Addressing Modes and Encoding
      3. 7.7.3 Instructions
        1.       MABSF32 MRa, MRb
        2.       MADD32 MRa, MRb, MRc
        3.       MADDF32 MRa, #16FHi, MRb
        4.       MADDF32 MRa, MRb, #16FHi
        5.       MADDF32 MRa, MRb, MRc
        6.       MADDF32 MRd, MRe, MRf||MMOV32 mem32, MRa
        7.       MADDF32 MRd, MRe, MRf ||MMOV32 MRa, mem32
        8.       MAND32 MRa, MRb, MRc
        9.       MASR32 MRa, #SHIFT
        10.       MBCNDD 16BitDest [, CNDF]
        11.       MCCNDD 16BitDest [, CNDF]
        12.       MCLRC BGINTM
        13.       MCMP32 MRa, MRb
        14.       MCMPF32 MRa, MRb
        15.       MCMPF32 MRa, #16FHi
        16.       MDEBUGSTOP
        17.       MDEBUGSTOP1
        18.       MEALLOW
        19.       MEDIS
        20.       MEINVF32 MRa, MRb
        21.       MEISQRTF32 MRa, MRb
        22.       MF32TOI16 MRa, MRb
        23.       MF32TOI16R MRa, MRb
        24.       MF32TOI32 MRa, MRb
        25.       MF32TOUI16 MRa, MRb
        26.       MF32TOUI16R MRa, MRb
        27.       MF32TOUI32 MRa, MRb
        28.       MFRACF32 MRa, MRb
        29.       MI16TOF32 MRa, MRb
        30.       MI16TOF32 MRa, mem16
        31.       MI32TOF32 MRa, mem32
        32.       MI32TOF32 MRa, MRb
        33.       MLSL32 MRa, #SHIFT
        34.       MLSR32 MRa, #SHIFT
        35.       MMACF32 MR3, MR2, MRd, MRe, MRf ||MMOV32 MRa, mem32
        36.       MMAXF32 MRa, MRb
        37.       MMAXF32 MRa, #16FHi
        38.       MMINF32 MRa, MRb
        39.       MMINF32 MRa, #16FHi
        40.       MMOV16 MARx, MRa, #16I
        41.       MMOV16 MARx, mem16
        42.       MMOV16 mem16, MARx
        43.       MMOV16 mem16, MRa
        44.       MMOV32 mem32, MRa
        45.       MMOV32 mem32, MSTF
        46.       MMOV32 MRa, mem32 [, CNDF]
        47.       MMOV32 MRa, MRb [, CNDF]
        48.       MMOV32 MSTF, mem32
        49.       MMOVD32 MRa, mem32
        50.       MMOVF32 MRa, #32F
        51.       MMOVI16 MARx, #16I
        52.       MMOVI32 MRa, #32FHex
        53.       MMOVIZ MRa, #16FHi
        54.       MMOVZ16 MRa, mem16
        55.       MMOVXI MRa, #16FLoHex
        56.       MMPYF32 MRa, MRb, MRc
        57.       MMPYF32 MRa, #16FHi, MRb
        58.       MMPYF32 MRa, MRb, #16FHi
        59.       MMPYF32 MRa, MRb, MRc||MADDF32 MRd, MRe, MRf
        60.       MMPYF32 MRd, MRe, MRf ||MMOV32 MRa, mem32
        61.       MMPYF32 MRd, MRe, MRf ||MMOV32 mem32, MRa
        62.       MMPYF32 MRa, MRb, MRc ||MSUBF32 MRd, MRe, MRf
        63.       MNEGF32 MRa, MRb[, CNDF]
        64.       MNOP
        65.       MOR32 MRa, MRb, MRc
        66.       MRCNDD [CNDF]
        67.       MSETC BGINTM
        68.       MSETFLG FLAG, VALUE
        69.       MSTOP
        70.       MSUB32 MRa, MRb, MRc
        71.       MSUBF32 MRa, MRb, MRc
        72.       MSUBF32 MRa, #16FHi, MRb
        73.       MSUBF32 MRd, MRe, MRf ||MMOV32 MRa, mem32
        74.       MSUBF32 MRd, MRe, MRf ||MMOV32 mem32, MRa
        75.       MSWAPF MRa, MRb [, CNDF]
        76.       MTESTTF CNDF
        77.       MUI16TOF32 MRa, mem16
        78.       MUI16TOF32 MRa, MRb
        79.       MUI32TOF32 MRa, mem32
        80.       MUI32TOF32 MRa, MRb
        81.       MXOR32 MRa, MRb, MRc
    8. 7.8 CLA Registers
      1. 7.8.1 CLA Base Address Table
      2. 7.8.2 CLA_ONLY_REGS Registers
      3. 7.8.3 CLA_SOFTINT_REGS Registers
      4. 7.8.4 CLA_REGS Registers
      5. 7.8.5 CLA Registers to Driverlib Functions
  10. 8 Configurable Logic Block (CLB)
    1. 8.1  Introduction
      1. 8.1.1 CLB Related Collateral
    2. 8.2  Description
      1. 8.2.1 CLB Clock
    3. 8.3  CLB Input/Output Connection
      1. 8.3.1 Overview
      2. 8.3.2 CLB Input Selection
      3. 8.3.3 CLB Output Selection
      4. 8.3.4 CLB Output Signal Multiplexer
    4. 8.4  CLB Tile
      1. 8.4.1 Static Switch Block
      2. 8.4.2 Counter Block
        1. 8.4.2.1 Counter Description
        2. 8.4.2.2 Counter Operation
        3. 8.4.2.3 Serializer Mode
        4. 8.4.2.4 Linear Feedback Shift Register (LFSR) Mode
      3. 8.4.3 FSM Block
      4. 8.4.4 LUT4 Block
      5. 8.4.5 Output LUT Block
      6. 8.4.6 Asynchronous Output Conditioning (AOC) Block
      7. 8.4.7 High Level Controller (HLC)
        1. 8.4.7.1 High Level Controller Events
        2. 8.4.7.2 High Level Controller Instructions
        3. 8.4.7.3 <Src> and <Dest>
        4. 8.4.7.4 Operation of the PUSH and PULL Instructions (Overflow and Underflow Detection)
    5. 8.5  CPU Interface
      1. 8.5.1 Register Description
      2. 8.5.2 Non-Memory Mapped Registers
    6. 8.6  DMA Access
    7. 8.7  CLB Data Export Through SPI RX Buffer
    8. 8.8  CLB Pipeline Mode
    9. 8.9  Software
      1. 8.9.1 CLB Examples
        1. 8.9.1.1  CLB Empty Project
        2. 8.9.1.2  CLB Combinational Logic
        3. 8.9.1.3  CLB GPIO Input Filter
        4. 8.9.1.4  CLB Auxilary PWM
        5. 8.9.1.5  CLB PWM Protection
        6. 8.9.1.6  CLB Event Window
        7. 8.9.1.7  CLB Signal Generator
        8. 8.9.1.8  CLB State Machine
        9. 8.9.1.9  CLB External Signal AND Gate
        10. 8.9.1.10 CLB Timer
        11. 8.9.1.11 CLB Timer Two States
        12. 8.9.1.12 CLB Interrupt Tag
        13. 8.9.1.13 CLB Output Intersect
        14. 8.9.1.14 CLB PUSH PULL
        15. 8.9.1.15 CLB Multi Tile
        16. 8.9.1.16 CLB Tile to Tile Delay
        17. 8.9.1.17 CLB Glue Logic
        18. 8.9.1.18 CLB based One-shot PWM
        19. 8.9.1.19 CLB AOC Control
        20. 8.9.1.20 CLB AOC Release Control
        21. 8.9.1.21 CLB XBARs
        22. 8.9.1.22 CLB AOC Control
        23. 8.9.1.23 CLB Serializer
        24. 8.9.1.24 CLB LFSR
        25. 8.9.1.25 CLB Lock Output Mask
        26. 8.9.1.26 CLB INPUT Pipeline Mode
        27. 8.9.1.27 CLB Clocking and PIPELINE Mode
        28. 8.9.1.28 CLB SPI Data Export
        29. 8.9.1.29 CLB SPI Data Export DMA
        30. 8.9.1.30 CLB Trip Zone Timestamp
        31. 8.9.1.31 CLB CRC
        32. 8.9.1.32 CLB TDM Serial Port
        33. 8.9.1.33 CLB LED Driver
    10. 8.10 CLB Registers
      1. 8.10.1 CLB Base Address Table
      2. 8.10.2 CLB_LOGIC_CONFIG_REGS Registers
      3. 8.10.3 CLB_LOGIC_CONTROL_REGS Registers
      4. 8.10.4 CLB_DATA_EXCHANGE_REGS Registers
      5. 8.10.5 CLB Registers to Driverlib Functions
  11. 9 Dual-Clock Comparator (DCC)
    1. 9.1 Introduction
      1. 9.1.1 Features
      2. 9.1.2 Block Diagram
    2. 9.2 Module Operation
      1. 9.2.1 Configuring DCC Counters
      2. 9.2.2 Single-Shot Measurement Mode
      3. 9.2.3 Continuous Monitoring Mode
      4. 9.2.4 Error Conditions
    3. 9.3 Interrupts
    4. 9.4 Software
      1. 9.4.1 DCC Examples
        1. 9.4.1.1 DCC Single shot Clock verification - SINGLE_CORE
        2. 9.4.1.2 DCC Single shot Clock measurement - SINGLE_CORE
        3. 9.4.1.3 DCC Continuous clock monitoring - SINGLE_CORE
    5. 9.5 DCC Registers
      1. 9.5.1 DCC Base Address Table
      2. 9.5.2 DCC_REGS Registers
      3. 9.5.3 DCC Registers to Driverlib Functions
  12. 10Direct Memory Access (DMA)
    1. 10.1 Introduction
      1. 10.1.1 Features
      2. 10.1.2 Block Diagram
    2. 10.2 Architecture
      1. 10.2.1 Peripheral Interrupt Event Trigger Sources
      2. 10.2.2 DMA Bus
    3. 10.3 Address Pointer and Transfer Control
    4. 10.4 Pipeline Timing and Throughput
    5. 10.5 CPU and CLA Arbitration
    6. 10.6 Channel Priority
      1. 10.6.1 Round-Robin Mode
      2. 10.6.2 Channel 1 High-Priority Mode
    7. 10.7 Overrun Detection Feature
    8. 10.8 Software
      1. 10.8.1 DMA Examples
        1. 10.8.1.1 DMA GSRAM Transfer (dma_ex1_gsram_transfer)
        2. 10.8.1.2 DMA Transfer Shared Peripheral - C28X_DUAL
        3. 10.8.1.3 DMA Transfer for Shared Peripheral Example (CPU2) - C28X_DUAL
        4. 10.8.1.4 DMA GSRAM Transfer (dma_ex2_gsram_transfer)
    9. 10.9 DMA Registers
      1. 10.9.1 DMA Base Address Table
      2. 10.9.2 DMA_REGS Registers
      3. 10.9.3 DMA_CH_REGS Registers
      4. 10.9.4 DMA_CLA_SRC_SEL_REGS Registers
      5. 10.9.5 DMA Registers to Driverlib Functions
  13. 11External Memory Interface (EMIF)
    1. 11.1 Introduction
      1. 11.1.1 Purpose of the Peripheral
      2. 11.1.2 EMIF Related Collateral
      3. 11.1.3 Features
        1. 11.1.3.1 Asynchronous Memory Support
        2. 11.1.3.2 Synchronous DRAM Memory Support
      4. 11.1.4 Functional Block Diagram
      5. 11.1.5 Configuring Device Pins
    2. 11.2 EMIF Module Architecture
      1. 11.2.1  EMIF Clock Control
      2. 11.2.2  EMIF Requests
      3. 11.2.3  EMIF Signal Descriptions
      4. 11.2.4  EMIF Signal Multiplexing Control
      5. 11.2.5  SDRAM Controller and Interface
        1. 11.2.5.1  SDRAM Commands
        2. 11.2.5.2  Interfacing to SDRAM
        3. 11.2.5.3  SDRAM Configuration Registers
        4. 11.2.5.4  SDRAM Auto-Initialization Sequence
        5. 11.2.5.5  SDRAM Configuration Procedure
        6. 11.2.5.6  EMIF Refresh Controller
          1. 11.2.5.6.1 Determining the Appropriate Value for the RR Field
        7. 11.2.5.7  Self-Refresh Mode
        8. 11.2.5.8  Power-Down Mode
        9. 11.2.5.9  SDRAM Read Operation
        10. 11.2.5.10 SDRAM Write Operations
        11. 11.2.5.11 Mapping from Logical Address to EMIF Pins
      6. 11.2.6  Asynchronous Controller and Interface
        1. 11.2.6.1 Interfacing to Asynchronous Memory
        2. 11.2.6.2 Accessing Larger Asynchronous Memories
        3. 11.2.6.3 Configuring EMIF for Asynchronous Accesses
        4. 11.2.6.4 Read and Write Operations in Normal Mode
          1. 11.2.6.4.1 Asynchronous Read Operations (Normal Mode)
          2. 11.2.6.4.2 Asynchronous Write Operations (Normal Mode)
        5. 11.2.6.5 Read and Write Operation in Select Strobe Mode
          1. 11.2.6.5.1 Asynchronous Read Operations (Select Strobe Mode)
          2. 11.2.6.5.2 Asynchronous Write Operations (Select Strobe Mode)
        6. 11.2.6.6 Extended Wait Mode and the EM1WAIT Pin
      7. 11.2.7  Data Bus Parking
      8. 11.2.8  Reset and Initialization Considerations
      9. 11.2.9  Interrupt Support
        1. 11.2.9.1 Interrupt Events
      10. 11.2.10 DMA Event Support
      11. 11.2.11 EMIF Signal Multiplexing
      12. 11.2.12 Memory Map
      13. 11.2.13 Priority and Arbitration
      14. 11.2.14 System Considerations
        1. 11.2.14.1 Asynchronous Request Times
      15. 11.2.15 Power Management
        1. 11.2.15.1 Power Management Using Self-Refresh Mode
        2. 11.2.15.2 Power Management Using Power Down Mode
      16. 11.2.16 Emulation Considerations
    3. 11.3 Example Configuration
      1. 11.3.1 Hardware Interface
      2. 11.3.2 Software Configuration
        1. 11.3.2.1 Configuring the SDRAM Interface
          1. 11.3.2.1.1 PLL Programming for EMIF to K4S641632H-TC(L)70 Interface
          2. 11.3.2.1.2 SDRAM Timing Register (SDRAM_TR) Settings for EMIF to K4S641632H-TC(L)70 Interface
          3. 11.3.2.1.3 SDRAM Self Refresh Exit Timing Register (SDR_EXT_TMNG) Settings for EMIF to K4S641632H-TC(L)70 Interface
          4. 11.3.2.1.4 SDRAM Refresh Control Register (SDRAM_RCR) Settings for EMIF to K4S641632H-TC(L)70 Interface
          5. 11.3.2.1.5 SDRAM Configuration Register (SDRAM_CR) Settings for EMIF to K4S641632H-TC(L)70 Interface
        2. 11.3.2.2 Configuring the Flash Interface
          1. 11.3.2.2.1 Asynchronous 1 Configuration Register (ASYNC_CS2_CFG) Settings for EMIF to LH28F800BJE-PTTL90 Interface
    4. 11.4 Software
      1. 11.4.1 EMIF Examples
        1. 11.4.1.1 Pin setup for EMIF module accessing ASRAM.
        2. 11.4.1.2 EMIF1 ASYNC module accessing 16bit ASRAM.
        3. 11.4.1.3 EMIF1 module accessing 16bit ASRAM as code memory.
        4. 11.4.1.4 EMIF1 module accessing 16bit SDRAM using memcpy_fast_far().
        5. 11.4.1.5 EMIF1 module accessing 16bit SDRAM then puts into Self Refresh mode before entering Low Power Mode.
        6. 11.4.1.6 EMIF1 module accessing 32bit SDRAM using DMA.
        7. 11.4.1.7 EMIF1 module accessing 16bit SDRAM using alternate address mapping.
    5. 11.5 EMIF Registers
      1. 11.5.1 EMIF Base Address Table
      2. 11.5.2 EMIF_REGS Registers
      3. 11.5.3 EMIF1_CONFIG_REGS Registers
      4. 11.5.4 EMIF Registers to Driverlib Functions
  14. 12Flash Module
    1. 12.1  Introduction to Flash and OTP Memory
      1. 12.1.1 FLASH Related Collateral
      2. 12.1.2 Features
      3. 12.1.3 Flash Tools
      4. 12.1.4 Default Flash Configuration
    2. 12.2  Flash Bank, OTP, and Pump
    3. 12.3  Flash Wrapper
    4. 12.4  Flash and OTP Memory Performance
    5. 12.5  Flash Read Interface
      1. 12.5.1 C28x-Flash Read Interface
        1. 12.5.1.1 Standard Read Mode
        2. 12.5.1.2 Prefetch Mode
        3. 12.5.1.3 Data Cache
        4. 12.5.1.4 Flash Read Operation
    6. 12.6  Flash Erase and Program
      1. 12.6.1 Flash Controller Access Semaphore
      2. 12.6.2 Erase
      3. 12.6.3 Program
      4. 12.6.4 Verify
    7. 12.7  Error Correction Code (ECC) Protection
      1. 12.7.1 Single-Bit Data Error
      2. 12.7.2 Uncorrectable Error
      3. 12.7.3 Mechanism to Check the Correctness of ECC Logic
    8. 12.8  Reserved Locations Within Flash and OTP
    9. 12.9  Migrating an Application from RAM to Flash
    10. 12.10 Procedure to Change the Flash Control Registers
    11. 12.11 Software
      1. 12.11.1 FLASH Examples
        1. 12.11.1.1 Flash Programming with 512-bit AutoECC, DataAndECC, DataOnly and EccOnly - C28X_DUAL
        2. 12.11.1.2 Flash Programming with AutoECC, DataAndECC, DataOnly and EccOnly - C28X_DUAL
        3. 12.11.1.3 Flash Programming with 512-bit AutoECC, DataAndECC, DataOnly and EccOnly - C28X_DUAL
        4. 12.11.1.4 Flash Programming with AutoECC, DataAndECC, DataOnly and EccOnly - C28X_DUAL
    12. 12.12 Flash Registers
      1. 12.12.1 FLASH Base Address Table
      2. 12.12.2 FLASH_CTRL_REGS Registers
      3. 12.12.3 FLASH_ECC_REGS Registers
      4. 12.12.4 FLASH Registers to Driverlib Functions
  15. 13Embedded Real-time Analysis and Diagnostic (ERAD)
    1. 13.1 Introduction
      1. 13.1.1 ERAD Related Collateral
    2. 13.2 Enhanced Bus Comparator Unit
      1. 13.2.1 Enhanced Bus Comparator Unit Operations
      2. 13.2.2 Event Masking and Exporting
    3. 13.3 System Event Counter Unit
      1. 13.3.1 System Event Counter Modes
        1. 13.3.1.1 Counting Active Levels Versus Edges
        2. 13.3.1.2 Max Mode
        3. 13.3.1.3 Cumulative Mode
        4. 13.3.1.4 Input Signal Selection
      2. 13.3.2 Reset on Event
      3. 13.3.3 Operation Conditions
    4. 13.4 ERAD Ownership, Initialization and Reset
    5. 13.5 ERAD Programming Sequence
      1. 13.5.1 Hardware Breakpoint and Hardware Watch Point Programming Sequence
      2. 13.5.2 Timer and Counter Programming Sequence
    6. 13.6 Cyclic Redundancy Check Unit
      1. 13.6.1 CRC Unit Qualifier
      2. 13.6.2 CRC Unit Programming Sequence
    7. 13.7 Program Counter Trace
      1. 13.7.1 Functional Block Diagram
      2. 13.7.2 Trace Qualification Modes
      3. 13.7.3 Trace Memory
      4. 13.7.4 Trace Input Signal Conditioning
      5. 13.7.5 PC Trace Software Operation
      6. 13.7.6 Trace Operation in Debug Mode
    8. 13.8 Software
      1. 13.8.1 ERAD Examples
        1. 13.8.1.1  ERAD Profiling Interrupts
        2. 13.8.1.2  ERAD Profile Function
        3. 13.8.1.3  ERAD Profile Function
        4. 13.8.1.4  ERAD HWBP Monitor Program Counter
        5. 13.8.1.5  ERAD HWBP Monitor Program Counter
        6. 13.8.1.6  ERAD Profile Function
        7. 13.8.1.7  ERAD HWBP Stack Overflow Detection
        8. 13.8.1.8  ERAD HWBP Stack Overflow Detection
        9. 13.8.1.9  ERAD Stack Overflow
        10. 13.8.1.10 ERAD Profile Interrupts CLA
        11. 13.8.1.11 ERAD Profiling Interrupts
        12. 13.8.1.12 ERAD Profiling Interrupts
        13. 13.8.1.13 ERAD MEMORY ACCESS RESTRICT
        14. 13.8.1.14 ERAD INTERRUPT ORDER
        15. 13.8.1.15 ERAD AND CLB
        16. 13.8.1.16 ERAD PWM PROTECTION
    9. 13.9 ERAD Registers
      1. 13.9.1 ERAD Base Address Table
      2. 13.9.2 ERAD_GLOBAL_REGS Registers
      3. 13.9.3 ERAD_HWBP_REGS Registers
      4. 13.9.4 ERAD_COUNTER_REGS Registers
      5. 13.9.5 ERAD_CRC_GLOBAL_REGS Registers
      6. 13.9.6 ERAD_CRC_REGS Registers
      7. 13.9.7 PCTRACE_REGS Registers
      8. 13.9.8 PCTRACE_BUFFER_REGS Registers
      9. 13.9.9 ERAD Registers to Driverlib Functions
  16. 14General-Purpose Input/Output (GPIO)
    1. 14.1  Introduction
      1. 14.1.1 GPIO Related Collateral
    2. 14.2  Configuration Overview
    3. 14.3  Digital Inputs on ADC Pins (AIOs)
    4. 14.4  Digital Inputs and Outputs on ADC Pins (AGPIOs)
    5. 14.5  Digital General-Purpose I/O Control
    6. 14.6  Input Qualification
      1. 14.6.1 No Synchronization (Asynchronous Input)
      2. 14.6.2 Synchronization to SYSCLKOUT Only
      3. 14.6.3 Qualification Using a Sampling Window
    7. 14.7  USB Signals
    8. 14.8  GPIO and Peripheral Muxing
      1. 14.8.1 GPIO Muxing
      2. 14.8.2 Peripheral Muxing
    9. 14.9  Internal Pullup Configuration Requirements
    10. 14.10 Software
      1. 14.10.1 GPIO Examples
        1. 14.10.1.1 Device GPIO Toggle - SINGLE_CORE
        2. 14.10.1.2 XINT/XBAR example - SINGLE_CORE
      2. 14.10.2 LED Examples
        1. 14.10.2.1 LED Blinky Example - MULTI_CORE
        2. 14.10.2.2 LED Blinky Example (CPU1,CPU3) - MULTI_CORE
        3. 14.10.2.3 LED Blinky example - SINGLE_CORE
        4. 14.10.2.4 LED Blinky Example (CPU1|CPU2|CPU3) - MULTI_CORE
        5. 14.10.2.5 LED Blinky Example (CPU2) - MULTI_CORE
        6. 14.10.2.6 LED Blinky Example (CPU3) - MULTI_CORE
    11. 14.11 GPIO Registers
      1. 14.11.1 GPIO Base Address Table
      2. 14.11.2 GPIO_CTRL_REGS Registers
      3. 14.11.3 GPIO_DATA_REGS Registers
      4. 14.11.4 GPIO_DATA_READ_REGS Registers
      5. 14.11.5 GPIO Registers to Driverlib Functions
  17. 15Interprocessor Communication (IPC)
    1. 15.1 Introduction
    2. 15.2 Message RAMs
    3. 15.3 IPC Flags and Interrupts
    4. 15.4 IPC Command Registers
    5. 15.5 Free-Running Counter
    6. 15.6 IPC Communication Protocol
    7. 15.7 Software
      1. 15.7.1 IPC Examples
        1. 15.7.1.1 IPC basic message passing example with interrupt - MULTI_CORE
        2. 15.7.1.2 IPC basic message passing example with interrupt - MULTI_CORE
        3. 15.7.1.3 IPC basic message passing example with interrupt - MULTI_CORE
        4. 15.7.1.4 IPC basic message passing example with interrupt - MULTI_CORE
    8. 15.8 IPC Registers
      1. 15.8.1 IPC Base Address Table
      2. 15.8.2 CPU1TOCPU2_IPC_REGS_CPU1VIEW Registers
      3. 15.8.3 CPU1TOCPU2_IPC_REGS_CPU2VIEW Registers
      4. 15.8.4 IPC Registers to Driverlib Functions
  18. 16Crossbar (X-BAR)
    1. 16.1 Input X-BAR, ICL XBAR, MINDB XBAR, and CLB Input X-BAR
      1. 16.1.1 CLB Input X-BAR
      2. 16.1.2 ICL and MINDB X-BAR
    2. 16.2 ePWM , CLB, and GPIO Output X-BAR
      1. 16.2.1 ePWM X-BAR
        1. 16.2.1.1 ePWM X-BAR Architecture
      2. 16.2.2 CLB X-BAR
        1. 16.2.2.1 CLB X-BAR Architecture
      3. 16.2.3 GPIO Output X-BAR
        1. 16.2.3.1 GPIO Output X-BAR Architecture
      4. 16.2.4 CLB Output X-BAR
        1. 16.2.4.1 CLB Output X-BAR Architecture
      5. 16.2.5 X-BAR Flags
    3. 16.3 XBAR Registers
      1. 16.3.1  XBAR Base Address Table
      2. 16.3.2  EPWM_XBAR_REGS Registers
      3. 16.3.3  INPUT_XBAR_REGS Registers
      4. 16.3.4  XBAR_REGS Registers
      5. 16.3.5  MINDB_XBAR_REGS Registers
      6. 16.3.6  ICL_XBAR_REGS Registers
      7. 16.3.7  CLB_XBAR_REGS Registers
      8. 16.3.8  OUTPUT_XBAR_EXT64_REGS Registers
      9. 16.3.9  OUTPUT_XBAR_REGS Registers
      10. 16.3.10 Register to Driverlib Function Mapping
        1. 16.3.10.1 EPWMXBAR Registers to Driverlib Functions
        2. 16.3.10.2 INPUTXBAR Registers to Driverlib Functions
        3. 16.3.10.3 XBAR Registers to Driverlib Functions
        4. 16.3.10.4 MINDBXBAR Registers to Driverlib Functions
        5. 16.3.10.5 ICLXBAR Registers to Driverlib Functions
        6. 16.3.10.6 CLBXBAR Registers to Driverlib Functions
        7. 16.3.10.7 OUTPUTXBAR Registers to Driverlib Functions
  19. 17Analog Subsystem
    1. 17.1 Introduction
      1. 17.1.1 Features
      2. 17.1.2 Block Diagram
    2. 17.2 Optimizing Power-Up Time
    3. 17.3 Digital Inputs on ADC Pins (AIOs)
    4. 17.4 Digital Inputs and Outputs on ADC Pins (AGPIOs)
    5. 17.5 Analog Subsystem Registers
      1. 17.5.1 ASBSYS Base Address Table
      2. 17.5.2 ANALOG_SUBSYS_REGS Registers
  20. 18Analog-to-Digital Converter (ADC)
    1. 18.1  Introduction
      1. 18.1.1 ADC Related Collateral
      2. 18.1.2 Features
      3. 18.1.3 Block Diagram
    2. 18.2  ADC Configurability
      1. 18.2.1 Clock Configuration
      2. 18.2.2 Resolution
      3. 18.2.3 Voltage Reference
        1. 18.2.3.1 External Reference Mode
        2. 18.2.3.2 Internal Reference Mode
        3. 18.2.3.3 Ganged References
        4. 18.2.3.4 Selecting Reference Mode
      4. 18.2.4 Signal Mode
      5. 18.2.5 Expected Conversion Results
      6. 18.2.6 Interpreting Conversion Results
    3. 18.3  SOC Principle of Operation
      1. 18.3.1 SOC Configuration
      2. 18.3.2 Trigger Operation
        1. 18.3.2.1 Global Software Trigger
        2. 18.3.2.2 Trigger Repeaters
          1. 18.3.2.2.1 Oversampling Mode
          2. 18.3.2.2.2 Undersampling Mode
          3. 18.3.2.2.3 Trigger Phase Delay
          4. 18.3.2.2.4 Re-trigger Spread
          5. 18.3.2.2.5 Trigger Repeater Configuration
            1. 18.3.2.2.5.1 Register Shadow Updates
          6. 18.3.2.2.6 Re-Trigger Logic
          7. 18.3.2.2.7 Multi-Path Triggering Behavior
      3. 18.3.3 ADC Acquisition (Sample and Hold) Window
      4. 18.3.4 ADC Input Models
      5. 18.3.5 Channel Selection
        1. 18.3.5.1 External Channel Selection
          1. 18.3.5.1.1 External Channel Selection Timing
    4. 18.4  SOC Configuration Examples
      1. 18.4.1 Single Conversion from ePWM Trigger
      2. 18.4.2 Oversampled Conversion from ePWM Trigger
      3. 18.4.3 Multiple Conversions from CPU Timer Trigger
      4. 18.4.4 Software Triggering of SOCs
    5. 18.5  ADC Conversion Priority
    6. 18.6  Burst Mode
      1. 18.6.1 Burst Mode Example
      2. 18.6.2 Burst Mode Priority Example
    7. 18.7  EOC and Interrupt Operation
      1. 18.7.1 Interrupt Overflow
      2. 18.7.2 Continue to Interrupt Mode
      3. 18.7.3 Early Interrupt Configuration Mode
    8. 18.8  Post-Processing Blocks
      1. 18.8.1 PPB Offset Correction
      2. 18.8.2 PPB Error Calculation
      3. 18.8.3 PPB Limit Detection and Zero-Crossing Detection
      4. 18.8.4 PPB Sample Delay Capture
      5. 18.8.5 PPB Oversampling
        1. 18.8.5.1 Accumulation, Minimum, Maximum, and Average Functions
        2. 18.8.5.2 Outlier Rejection
    9. 18.9  Result Safety Checker
      1. 18.9.1 Result Safety Checker Operation
      2. 18.9.2 Result Safety Checker Interrupts and Events
    10. 18.10 Opens/Shorts Detection Circuit (OSDETECT)
      1. 18.10.1 Implementation
      2. 18.10.2 Detecting an Open Input Pin
      3. 18.10.3 Detecting a Shorted Input Pin
    11. 18.11 Power-Up Sequence
    12. 18.12 ADC Calibration
      1. 18.12.1 ADC Zero Offset Calibration
    13. 18.13 ADC Timings
      1. 18.13.1 ADC Timing Diagrams
      2. 18.13.2 Post-Processing Block Timings
    14. 18.14 Additional Information
      1. 18.14.1 Ensuring Synchronous Operation
        1. 18.14.1.1 Basic Synchronous Operation
        2. 18.14.1.2 Synchronous Operation with Multiple Trigger Sources
        3. 18.14.1.3 Synchronous Operation with Uneven SOC Numbers
        4. 18.14.1.4 Synchronous Operation with Different Resolutions
        5. 18.14.1.5 Non-overlapping Conversions
      2. 18.14.2 Choosing an Acquisition Window Duration
      3. 18.14.3 Achieving Simultaneous Sampling
      4. 18.14.4 Result Register Mapping
      5. 18.14.5 Internal Temperature Sensor
      6. 18.14.6 Designing an External Reference Circuit
      7. 18.14.7 ADC-DAC Loopback Testing
      8. 18.14.8 Internal Test Mode
      9. 18.14.9 ADC Gain and Offset Calibration
    15. 18.15 Software
      1. 18.15.1 ADC Examples
        1. 18.15.1.1  ADC Software Triggering - SINGLE_CORE
        2. 18.15.1.2  ADC ePWM Triggering - SINGLE_CORE
        3. 18.15.1.3  ADC Temperature Sensor Conversion - SINGLE_CORE
        4. 18.15.1.4  ADC Synchronous SOC Software Force (adc_soc_software_sync) - SINGLE_CORE
        5. 18.15.1.5  ADC Continuous Triggering (adc_soc_continuous) - SINGLE_CORE
        6. 18.15.1.6  ADC Continuous Conversions Read by DMA (adc_soc_continuous_dma) - SINGLE_CORE
        7. 18.15.1.7  ADC PPB Offset (adc_ppb_offset) - SINGLE_CORE
        8. 18.15.1.8  ADC PPB Limits (adc_ppb_limits) - SINGLE_CORE
        9. 18.15.1.9  ADC PPB Delay Capture (adc_ppb_delay) - SINGLE_CORE
        10. 18.15.1.10 ADC ePWM Triggering Multiple SOC - SINGLE_CORE
        11. 18.15.1.11 ADC Burst Mode - SINGLE_CORE
        12. 18.15.1.12 ADC Burst Mode Oversampling - SINGLE_CORE
        13. 18.15.1.13 ADC SOC Oversampling - SINGLE_CORE
        14. 18.15.1.14 ADC PPB PWM trip (adc_ppb_pwm_trip) - SINGLE_CORE
        15. 18.15.1.15 ADC Trigger Repeater Oversampling - SINGLE_CORE
        16. 18.15.1.16 ADC Trigger Repeater Undersampling - SINGLE_CORE
        17. 18.15.1.17 ADC Safety Checker - SINGLE_CORE
    16. 18.16 ADC Registers
      1. 18.16.1 ADC Base Address Table
      2. 18.16.2 ADC_RESULT_REGS Registers
      3. 18.16.3 ADC_REGS Registers
      4. 18.16.4 ADC_SAFECHECK_INTEVT_REGS Registers
      5. 18.16.5 ADC_SAFECHECK_REGS Registers
      6. 18.16.6 ADC Registers to Driverlib Functions
  21. 19Buffered Digital-to-Analog Converter (DAC)
    1. 19.1 Introduction
      1. 19.1.1 DAC Related Collateral
      2. 19.1.2 Features
      3. 19.1.3 Block Diagram
    2. 19.2 Using the DAC
      1. 19.2.1 Initialization Sequence
      2. 19.2.2 DAC Offset Adjustment
      3. 19.2.3 EPWMSYNCPER Signal
    3. 19.3 Lock Registers
    4. 19.4 Software
      1. 19.4.1 DAC Examples
        1. 19.4.1.1 Buffered DAC Enable - SINGLE_CORE
        2. 19.4.1.2 Buffered DAC Random - SINGLE_CORE
    5. 19.5 DAC Registers
      1. 19.5.1 DAC Base Address Table
      2. 19.5.2 DAC_REGS Registers
      3. 19.5.3 DAC Registers to Driverlib Functions
  22. 20Comparator Subsystem (CMPSS)
    1. 20.1 Introduction
      1. 20.1.1 CMPSS Related Collateral
      2. 20.1.2 Features
      3. 20.1.3 Block Diagram
    2. 20.2 Comparator
    3. 20.3 Reference DAC
    4. 20.4 Ramp Generator
      1. 20.4.1 Ramp Generator Overview
      2. 20.4.2 Ramp Generator Behavior
      3. 20.4.3 Ramp Generator Behavior at Corner Cases
    5. 20.5 Digital Filter
      1. 20.5.1 Filter Initialization Sequence
    6. 20.6 Using the CMPSS
      1. 20.6.1 LATCHCLR, EPWMSYNCPER, and EPWMBLANK Signals
      2. 20.6.2 Synchronizer, Digital Filter, and Latch Delays
      3. 20.6.3 Calibrating the CMPSS
      4. 20.6.4 Enabling and Disabling the CMPSS Clock
    7. 20.7 Software
      1. 20.7.1 CMPSS Examples
        1. 20.7.1.1 CMPSS Asynchronous Trip - SINGLE_CORE
        2. 20.7.1.2 CMPSS Digital Filter Configuration - SINGLE_CORE
    8. 20.8 CMPSS Registers
      1. 20.8.1 CMPSS Base Address Table
      2. 20.8.2 CMPSS_REGS Registers
      3. 20.8.3 CMPSS Registers to Driverlib Functions
  23. 21Enhanced Capture (eCAP) and High Resolution Capture (HRCAP)
    1. 21.1  Introduction
      1. 21.1.1 Features
      2. 21.1.2 ECAP Related Collateral
    2. 21.2  Description
    3. 21.3  Configuring Device Pins for the eCAP
    4. 21.4  Capture and APWM Operating Mode
    5. 21.5  Capture Mode Description
      1. 21.5.1  Event Prescaler
      2. 21.5.2  Glitch Filter
      3. 21.5.3  Edge Polarity Select and Qualifier
      4. 21.5.4  Continuous/One-Shot Control
      5. 21.5.5  32-Bit Counter and Phase Control
      6. 21.5.6  CAP1-CAP4 Registers
      7. 21.5.7  eCAP Synchronization
        1. 21.5.7.1 Example 1 - Using SWSYNC with ECAP Module
      8. 21.5.8  Interrupt Control
      9. 21.5.9  DMA Interrupt
      10. 21.5.10 ADC SOC Event
      11. 21.5.11 Shadow Load and Lockout Control
      12. 21.5.12 APWM Mode Operation
      13. 21.5.13 Signal Monitoring Unit
        1. 21.5.13.1 Pulse Width and Period Monitoring
        2. 21.5.13.2 Edge Monitoring
    6. 21.6  Application of the eCAP Module
      1. 21.6.1 Example 1 - Absolute Time-Stamp Operation Rising-Edge Trigger
      2. 21.6.2 Example 2 - Absolute Time-Stamp Operation Rising- and Falling-Edge Trigger
      3. 21.6.3 Example 3 - Time Difference (Delta) Operation Rising-Edge Trigger
      4. 21.6.4 Example 4 - Time Difference (Delta) Operation Rising- and Falling-Edge Trigger
    7. 21.7  Application of the APWM Mode
      1. 21.7.1 Example 1 - Simple PWM Generation (Independent Channels)
    8. 21.8  High Resolution Capture (HRCAP) Module
      1. 21.8.1 Introduction
        1. 21.8.1.1 HRCAP Related Collateral
        2. 21.8.1.2 Features
        3. 21.8.1.3 Description
      2. 21.8.2 Operational Details
        1. 21.8.2.1 HRCAP Clocking
        2. 21.8.2.2 HRCAP Initialization Sequence
        3. 21.8.2.3 HRCAP Interrupts
        4. 21.8.2.4 HRCAP Calibration
          1. 21.8.2.4.1 Applying the Scale Factor
      3. 21.8.3 Known Exceptions
    9. 21.9  Software
      1. 21.9.1 ECAP Examples
        1. 21.9.1.1 eCAP APWM Example - SINGLE_CORE
        2. 21.9.1.2 eCAP Capture PWM Example - SINGLE_CORE
        3. 21.9.1.3 eCAP APWM Phase-shift Example - SINGLE_CORE
      2. 21.9.2 HRCAP Examples
        1. 21.9.2.1 HRCAP Capture and Calibration Example - SINGLE_CORE
    10. 21.10 eCAP Registers
      1. 21.10.1 ECAP Base Address Table
      2. 21.10.2 ECAP_REGS Registers
      3. 21.10.3 ECAP_SIGNAL_MONITORING Registers
      4. 21.10.4 ECAP Registers to Driverlib Functions
    11. 21.11 HRCAP Registers
      1. 21.11.1 HRCAP Base Address Table
      2. 21.11.2 HRCAP_REGS Registers
      3. 21.11.3 HRCAP Registers to Driverlib Functions
  24. 22Enhanced Pulse Width Modulator (ePWM)
    1. 22.1  Introduction
      1. 22.1.1 EPWM Related Collateral
      2. 22.1.2 Submodule Overview
    2. 22.2  Configuring Device Pins
    3. 22.3  ePWM Modules Overview
    4. 22.4  Time-Base (TB) Submodule
      1. 22.4.1 Purpose of the Time-Base Submodule
      2. 22.4.2 Controlling and Monitoring the Time-Base Submodule
      3. 22.4.3 Calculating PWM Period and Frequency
        1. 22.4.3.1 Time-Base Period Shadow Register
        2. 22.4.3.2 Time-Base Clock Synchronization
        3. 22.4.3.3 Time-Base Counter Synchronization
        4. 22.4.3.4 ePWM SYNC Selection
      4. 22.4.4 Phase Locking the Time-Base Clocks of Multiple ePWM Modules
      5. 22.4.5 Simultaneous Writes to TBPRD and CMPx Registers Between ePWM Modules
      6. 22.4.6 Time-Base Counter Modes and Timing Waveforms
      7. 22.4.7 Global Load
        1. 22.4.7.1 Global Load Pulse Pre-Scalar
        2. 22.4.7.2 One-Shot Load Mode
        3. 22.4.7.3 One-Shot Sync Mode
    5. 22.5  Counter-Compare (CC) Submodule
      1. 22.5.1 Purpose of the Counter-Compare Submodule
      2. 22.5.2 Controlling and Monitoring the Counter-Compare Submodule
      3. 22.5.3 Operational Highlights for the Counter-Compare Submodule
      4. 22.5.4 Count Mode Timing Waveforms
    6. 22.6  Action-Qualifier (AQ) Submodule
      1. 22.6.1 Purpose of the Action-Qualifier Submodule
      2. 22.6.2 Action-Qualifier Submodule Control and Status Register Definitions
      3. 22.6.3 Action-Qualifier Event Priority
      4. 22.6.4 AQCTLA and AQCTLB Shadow Mode Operations
      5. 22.6.5 Configuration Requirements for Common Waveforms
    7. 22.7  XCMP Complex Waveform Generator Mode
      1. 22.7.1 XCMP Allocation to CMPA and CMPB
      2. 22.7.2 XCMP Shadow Buffers
      3. 22.7.3 XCMP Operation
    8. 22.8  Dead-Band Generator (DB) Submodule
      1. 22.8.1 Purpose of the Dead-Band Submodule
      2. 22.8.2 Dead-band Submodule Additional Operating Modes
      3. 22.8.3 Operational Highlights for the Dead-Band Submodule
    9. 22.9  PWM Chopper (PC) Submodule
      1. 22.9.1 Purpose of the PWM Chopper Submodule
      2. 22.9.2 Operational Highlights for the PWM Chopper Submodule
      3. 22.9.3 Waveforms
        1. 22.9.3.1 One-Shot Pulse
        2. 22.9.3.2 Duty Cycle Control
    10. 22.10 Trip-Zone (TZ) Submodule
      1. 22.10.1 Purpose of the Trip-Zone Submodule
      2. 22.10.2 Operational Highlights for the Trip-Zone Submodule
        1. 22.10.2.1 Trip-Zone Configurations
      3. 22.10.3 Generating Trip Event Interrupts
    11. 22.11 Diode Emulation (DE) Submodule
      1. 22.11.1 DEACTIVE Mode
      2. 22.11.2 Exiting DE Mode
      3. 22.11.3 Re-Entering DE Mode
      4. 22.11.4 DE Monitor
    12. 22.12 Minimum Dead-Band (MINDB) + Illegal Combination Logic (ICL) Submodules
      1. 22.12.1 Minimum Dead-Band (MINDB)
      2. 22.12.2 Illegal Combo Logic (ICL)
    13. 22.13 Event-Trigger (ET) Submodule
      1. 22.13.1 Operational Overview of the ePWM Event-Trigger Submodule
    14. 22.14 Digital Compare (DC) Submodule
      1. 22.14.1 Purpose of the Digital Compare Submodule
      2. 22.14.2 Enhanced Trip Action Using CMPSS
      3. 22.14.3 Using CMPSS to Trip the ePWM on a Cycle-by-Cycle Basis
      4. 22.14.4 Operation Highlights of the Digital Compare Submodule
        1. 22.14.4.1 Digital Compare Events
        2. 22.14.4.2 Event Filtering
        3. 22.14.4.3 Valley Switching
        4. 22.14.4.4 Event Detection
          1. 22.14.4.4.1 Input Signal Detection
          2. 22.14.4.4.2 MIN and MAX Detection Circuit
    15. 22.15 ePWM Crossbar (X-BAR)
    16. 22.16 Applications to Power Topologies
      1. 22.16.1  Overview of Multiple Modules
      2. 22.16.2  Key Configuration Capabilities
      3. 22.16.3  Controlling Multiple Buck Converters With Independent Frequencies
      4. 22.16.4  Controlling Multiple Buck Converters With Same Frequencies
      5. 22.16.5  Controlling Multiple Half H-Bridge (HHB) Converters
      6. 22.16.6  Controlling Dual 3-Phase Inverters for Motors (ACI and PMSM)
      7. 22.16.7  Practical Applications Using Phase Control Between PWM Modules
      8. 22.16.8  Controlling a 3-Phase Interleaved DC/DC Converter
      9. 22.16.9  Controlling Zero Voltage Switched Full Bridge (ZVSFB) Converter
      10. 22.16.10 Controlling a Peak Current Mode Controlled Buck Module
      11. 22.16.11 Controlling H-Bridge LLC Resonant Converter
    17. 22.17 Register Lock Protection
    18. 22.18 High-Resolution Pulse Width Modulator (HRPWM)
      1. 22.18.1 Operational Description of HRPWM
        1. 22.18.1.1 Controlling the HRPWM Capabilities
        2. 22.18.1.2 HRPWM Source Clock
        3. 22.18.1.3 Configuring the HRPWM
        4. 22.18.1.4 Configuring High-Resolution in Deadband Rising-Edge and Falling-Edge Delay
        5. 22.18.1.5 Principle of Operation
          1. 22.18.1.5.1 Edge Positioning
          2. 22.18.1.5.2 Scaling Considerations
          3. 22.18.1.5.3 Duty Cycle Range Limitation
          4. 22.18.1.5.4 High-Resolution Period
            1. 22.18.1.5.4.1 High-Resolution Period Configuration
        6. 22.18.1.6 Deadband High-Resolution Operation
        7. 22.18.1.7 Scale Factor Optimizing Software (SFO)
        8. 22.18.1.8 HRPWM Examples Using Optimized Assembly Code
          1. 22.18.1.8.1 #Defines for HRPWM Header Files
          2. 22.18.1.8.2 Implementing a Simple Buck Converter
            1. 22.18.1.8.2.1 HRPWM Buck Converter Initialization Code
            2. 22.18.1.8.2.2 HRPWM Buck Converter Run-Time Code
          3. 22.18.1.8.3 Implementing a DAC Function Using an R+C Reconstruction Filter
            1. 22.18.1.8.3.1 PWM DAC Function Initialization Code
            2. 22.18.1.8.3.2 PWM DAC Function Run-Time Code
      2. 22.18.2 SFO Library Software - SFO_TI_Build_V8.lib
        1. 22.18.2.1 Scale Factor Optimizer Function - int SFO()
        2. 22.18.2.2 Software Usage
          1. 22.18.2.2.1 A Sample of How to Add "Include" Files
          2.        1198
          3. 22.18.2.2.2 Declaring an Element
          4.        1200
          5. 22.18.2.2.3 Initializing With a Scale Factor Value
          6.        1202
          7. 22.18.2.2.4 SFO Function Calls
    19. 22.19 Software
      1. 22.19.1 EPWM Examples
        1. 22.19.1.1  ePWM Trip Zone - SINGLE_CORE
        2. 22.19.1.2  ePWM Up Down Count Action Qualifier - SINGLE_CORE
        3. 22.19.1.3  ePWM Synchronization - SINGLE_CORE
        4. 22.19.1.4  ePWM Digital Compare - SINGLE_CORE
        5. 22.19.1.5  ePWM Digital Compare Event Filter Blanking Window - SINGLE_CORE
        6. 22.19.1.6  ePWM Valley Switching - SINGLE_CORE
        7. 22.19.1.7  ePWM Digital Compare Edge Filter - SINGLE_CORE
        8. 22.19.1.8  ePWM Deadband - SINGLE_CORE
        9. 22.19.1.9  ePWM DMA - SINGLE_CORE
        10. 22.19.1.10 ePWM Chopper - SINGLE_CORE
        11. 22.19.1.11 EPWM Configure Signal - SINGLE_CORE
        12. 22.19.1.12 Realization of Monoshot mode - SINGLE_CORE
        13. 22.19.1.13 EPWM Action Qualifier (epwm_up_aq) - SINGLE_CORE
        14. 22.19.1.14 ePWM XCMP Mode - SINGLE_CORE
        15. 22.19.1.15 ePWM Event Detection - SINGLE_CORE
      2. 22.19.2 HRPWM Examples
        1. 22.19.2.1 HRPWM Duty Control with SFO
        2. 22.19.2.2 HRPWM Slider
        3. 22.19.2.3 HRPWM Period Control
        4. 22.19.2.4 HRPWM Duty Control with UPDOWN Mode
        5. 22.19.2.5 HRPWM Slider Test
        6. 22.19.2.6 HRPWM Duty Up Count
        7. 22.19.2.7 HRPWM Period Up-Down Count
    20. 22.20 ePWM Registers
      1. 22.20.1 EPWM Base Address Table
      2. 22.20.2 EPWM_REGS Registers
      3. 22.20.3 EPWM_XCMP_REGS Registers
      4. 22.20.4 DE_REGS Registers
      5. 22.20.5 MINDB_LUT_REGS Registers
      6. 22.20.6 HRPWMCAL_REGS Registers
      7. 22.20.7 Register to Driverlib Function Mapping
        1. 22.20.7.1 EPWM Registers to Driverlib Functions
        2. 22.20.7.2 HRPWM Registers to Driverlib Functions
        3. 22.20.7.3 HRPWMCAL Registers to Driverlib Functions
  25. 23Enhanced Quadrature Encoder Pulse (eQEP)
    1. 23.1  Introduction
      1. 23.1.1 EQEP Related Collateral
    2. 23.2  Configuring Device Pins
    3. 23.3  Description
      1. 23.3.1 EQEP Inputs
      2. 23.3.2 Functional Description
      3. 23.3.3 eQEP Memory Map
    4. 23.4  Quadrature Decoder Unit (QDU)
      1. 23.4.1 Position Counter Input Modes
        1. 23.4.1.1 Quadrature Count Mode
        2. 23.4.1.2 Direction-Count Mode
        3. 23.4.1.3 Up-Count Mode
        4. 23.4.1.4 Down-Count Mode
      2. 23.4.2 eQEP Input Polarity Selection
      3. 23.4.3 Position-Compare Sync Output
    5. 23.5  Position Counter and Control Unit (PCCU)
      1. 23.5.1 Position Counter Operating Modes
        1. 23.5.1.1 Position Counter Reset on Index Event (QEPCTL[PCRM] = 00)
        2. 23.5.1.2 Position Counter Reset on Maximum Position (QEPCTL[PCRM] = 01)
        3. 23.5.1.3 Position Counter Reset on the First Index Event (QEPCTL[PCRM] = 10)
        4. 23.5.1.4 Position Counter Reset on Unit Time-out Event (QEPCTL[PCRM] = 11)
      2. 23.5.2 Position Counter Latch
        1. 23.5.2.1 Index Event Latch
        2. 23.5.2.2 Strobe Event Latch
      3. 23.5.3 Position Counter Initialization
      4. 23.5.4 eQEP Position-compare Unit
    6. 23.6  eQEP Edge Capture Unit
    7. 23.7  eQEP Watchdog
    8. 23.8  eQEP Unit Timer Base
    9. 23.9  QMA Module
      1. 23.9.1 Modes of Operation
        1. 23.9.1.1 QMA Mode-1 (QMACTRL[MODE] = 1)
        2. 23.9.1.2 QMA Mode-2 (QMACTRL[MODE] = 2)
      2. 23.9.2 Interrupt and Error Generation
    10. 23.10 eQEP Interrupt Structure
    11. 23.11 Software
      1. 23.11.1 EQEP Examples
        1. 23.11.1.1 Frequency Measurement Using eQEP via unit timeout interrupt - SINGLE_CORE
        2. 23.11.1.2 Motor speed and direction measurement using eQEP via unit timeout interrupt - SINGLE_CORE
    12. 23.12 eQEP Registers
      1. 23.12.1 EQEP Base Address Table
      2. 23.12.2 EQEP_REGS Registers
      3. 23.12.3 EQEP Registers to Driverlib Functions
  26. 24Sigma Delta Filter Module (SDFM)
    1. 24.1  Introduction
      1. 24.1.1 SDFM Related Collateral
      2. 24.1.2 Features
      3. 24.1.3 Block Diagram
    2. 24.2  Configuring Device Pins
    3. 24.3  Input Qualification
    4. 24.4  Input Control Unit
    5. 24.5  SDFM Clock Control
    6. 24.6  Sinc Filter
      1. 24.6.1 Data Rate and Latency of the Sinc Filter
    7. 24.7  Data (Primary) Filter Unit
      1. 24.7.1 32-bit or 16-bit Data Filter Output Representation
      2. 24.7.2 Data FIFO
      3. 24.7.3 SDSYNC Event
    8. 24.8  Comparator (Secondary) Filter Unit
      1. 24.8.1 Higher Threshold (HLT) Comparators
      2. 24.8.2 Lower Threshold (LLT) Comparators
      3. 24.8.3 Digital Filter
    9. 24.9  Theoretical SDFM Filter Output
    10. 24.10 Interrupt Unit
      1. 24.10.1 SDFM (SDyERR) Interrupt Sources
      2. 24.10.2 Data Ready (DRINT) Interrupt Sources
    11. 24.11 Software
      1. 24.11.1 SDFM Examples
        1. 24.11.1.1 SDFM Filter Sync CPU
        2. 24.11.1.2 SDFM Filter Sync CLA
        3. 24.11.1.3 SDFM Filter Sync DMA
        4. 24.11.1.4 SDFM PWM Sync
        5. 24.11.1.5 SDFM Type 1 Filter FIFO
        6. 24.11.1.6 SDFM Filter Sync CLA
    12. 24.12 SDFM Registers
      1. 24.12.1 SDFM Base Address Table
      2. 24.12.2 SDFM_REGS Registers
      3. 24.12.3 SDFM Registers to Driverlib Functions
  27. 25Controller Area Network (CAN)
    1. 25.1  Introduction
      1. 25.1.1 DCAN Related Collateral
      2. 25.1.2 Features
      3. 25.1.3 Block Diagram
        1. 25.1.3.1 CAN Core
        2. 25.1.3.2 Message Handler
        3. 25.1.3.3 Message RAM
        4. 25.1.3.4 Registers and Message Object Access (IFx)
    2. 25.2  Functional Description
      1. 25.2.1 Configuring Device Pins
      2. 25.2.2 Address/Data Bus Bridge
    3. 25.3  Operating Modes
      1. 25.3.1 Initialization
      2. 25.3.2 CAN Message Transfer (Normal Operation)
        1. 25.3.2.1 Disabled Automatic Retransmission
        2. 25.3.2.2 Auto-Bus-On
      3. 25.3.3 Test Modes
        1. 25.3.3.1 Silent Mode
        2. 25.3.3.2 Loopback Mode
        3. 25.3.3.3 External Loopback Mode
        4. 25.3.3.4 Loopback Combined with Silent Mode
    4. 25.4  Multiple Clock Source
    5. 25.5  Interrupt Functionality
      1. 25.5.1 Message Object Interrupts
      2. 25.5.2 Status Change Interrupts
      3. 25.5.3 Error Interrupts
      4. 25.5.4 Peripheral Interrupt Expansion (PIE) Module Nomenclature for DCAN Interrupts
      5. 25.5.5 Interrupt Topologies
    6. 25.6  DMA Functionality
    7. 25.7  Parity Check Mechanism
      1. 25.7.1 Behavior on Parity Error
    8. 25.8  Debug Mode
    9. 25.9  Module Initialization
    10. 25.10 Configuration of Message Objects
      1. 25.10.1 Configuration of a Transmit Object for Data Frames
      2. 25.10.2 Configuration of a Transmit Object for Remote Frames
      3. 25.10.3 Configuration of a Single Receive Object for Data Frames
      4. 25.10.4 Configuration of a Single Receive Object for Remote Frames
      5. 25.10.5 Configuration of a FIFO Buffer
    11. 25.11 Message Handling
      1. 25.11.1  Message Handler Overview
      2. 25.11.2  Receive/Transmit Priority
      3. 25.11.3  Transmission of Messages in Event Driven CAN Communication
      4. 25.11.4  Updating a Transmit Object
      5. 25.11.5  Changing a Transmit Object
      6. 25.11.6  Acceptance Filtering of Received Messages
      7. 25.11.7  Reception of Data Frames
      8. 25.11.8  Reception of Remote Frames
      9. 25.11.9  Reading Received Messages
      10. 25.11.10 Requesting New Data for a Receive Object
      11. 25.11.11 Storing Received Messages in FIFO Buffers
      12. 25.11.12 Reading from a FIFO Buffer
    12. 25.12 CAN Bit Timing
      1. 25.12.1 Bit Time and Bit Rate
        1. 25.12.1.1 Synchronization Segment
        2. 25.12.1.2 Propagation Time Segment
        3. 25.12.1.3 Phase Buffer Segments and Synchronization
        4. 25.12.1.4 Oscillator Tolerance Range
      2. 25.12.2 Configuration of the CAN Bit Timing
        1. 25.12.2.1 Calculation of the Bit Timing Parameters
        2. 25.12.2.2 Example for Bit Timing at High Baudrate
        3. 25.12.2.3 Example for Bit Timing at Low Baudrate
    13. 25.13 Message Interface Register Sets
      1. 25.13.1 Message Interface Register Sets 1 and 2 (IF1 and IF2)
      2. 25.13.2 Message Interface Register Set 3 (IF3)
    14. 25.14 Message RAM
      1. 25.14.1 Structure of Message Objects
      2. 25.14.2 Addressing Message Objects in RAM
      3. 25.14.3 Message RAM Representation in Debug Mode
    15. 25.15 Software
      1. 25.15.1 CAN Examples
        1. 25.15.1.1  CAN Dual Core Example - C28X_DUAL
        2. 25.15.1.2  CAN External Loopback
        3. 25.15.1.3  CAN External Loopback - C28X_DUAL
        4. 25.15.1.4  CAN External Loopback with Interrupts
        5. 25.15.1.5  CAN External Loopback with Interrupts - C28X_DUAL
        6. 25.15.1.6  CAN External Loopback with DMA
        7. 25.15.1.7  CAN Transmit and Receive Configurations
        8. 25.15.1.8  CAN Error Generation Example
        9. 25.15.1.9  CAN Remote Request Loopback
        10. 25.15.1.10 CAN example that illustrates the usage of Mask registers
    16. 25.16 CAN Registers
      1. 25.16.1 CAN Base Address Table
      2. 25.16.2 CAN_REGS Registers
      3. 25.16.3 CAN Registers to Driverlib Functions
  28. 26EtherCAT® SubordinateDevice Controller (ESC)
    1. 26.1 Introduction
      1. 26.1.1  ECAT Related Collateral
      2. 26.1.2  ESC Features
      3. 26.1.3  ESC Subsystem Integrated Features
      4. 26.1.4  F28P65x ESC versus Beckhoff ET1100
      5. 26.1.5  EtherCAT IP Block Diagram
      6. 26.1.6  ESC Functional Blocks
        1. 26.1.6.1  Interface to EtherCAT MainDevice
        2. 26.1.6.2  Process Data Interface
        3. 26.1.6.3  General-Purpose Inputs and Outputs
        4. 26.1.6.4  EtherCAT Processing Unit (EPU)
        5. 26.1.6.5  Fieldbus Memory Management Unit (FMMU)
        6. 26.1.6.6  Sync Manager
        7. 26.1.6.7  Monitoring
        8. 26.1.6.8  Reset Controller
        9. 26.1.6.9  PHY Management
        10. 26.1.6.10 Distributed Clock (DC)
        11. 26.1.6.11 EEPROM
        12. 26.1.6.12 Status / LEDs
      7. 26.1.7  EtherCAT Physical Layer
        1. 26.1.7.1 MII Interface
        2. 26.1.7.2 PHY Management Interface
          1. 26.1.7.2.1 PHY Address Configuration
          2. 26.1.7.2.2 PHY Reset Signal
          3. 26.1.7.2.3 PHY Clock
      8. 26.1.8  EtherCAT Protocol
      9. 26.1.9  EtherCAT State Machine (ESM)
      10. 26.1.10 More Information on EtherCAT
      11. 26.1.11 Beckhoff® Automation EtherCAT IP Errata
    2. 26.2 ESC and ESCSS Description
      1. 26.2.1  ESC RAM Parity and Memory Address Maps
        1. 26.2.1.1 ESC RAM Parity Logic
        2. 26.2.1.2 CPU1 and CPU2 ESC Memory Address Map
      2. 26.2.2  Local Host Communication
        1. 26.2.2.1 Byte Accessibility Through PDI
        2. 26.2.2.2 Software Details for Operation Across Clock Domains
      3. 26.2.3  Debug Emulation Mode Operation
      4. 26.2.4  ESC SubSystem
        1. 26.2.4.1 CPU1 Bus Interface
        2. 26.2.4.2 CPU2 Bus Interface
      5. 26.2.5  Interrupts and Interrupt Mapping
      6. 26.2.6  Power, Clocks, and Resets
        1. 26.2.6.1 Power
        2. 26.2.6.2 Clocking
        3. 26.2.6.3 Resets
          1. 26.2.6.3.1 Chip-Level Reset
          2. 26.2.6.3.2 EtherCAT Soft Resets
          3. 26.2.6.3.3 Reset Out (RESET_OUT)
      7. 26.2.7  LED Controls
      8. 26.2.8  SubordinateDevice Node Configuration and EEPROM
      9. 26.2.9  General-Purpose Inputs and Outputs
        1. 26.2.9.1 General-Purpose Inputs
        2. 26.2.9.2 General-Purpose Output
      10. 26.2.10 Distributed Clocks – Sync and Latch
        1. 26.2.10.1 Clock Synchronization
        2. 26.2.10.2 SYNC Signals
          1. 26.2.10.2.1 Seeking Host Intervention
        3. 26.2.10.3 LATCH Signals
          1. 26.2.10.3.1 Timestamping
        4. 26.2.10.4 Device Control and Synchronization
          1. 26.2.10.4.1 Synchronization of PWM
          2. 26.2.10.4.2 ECAP SYNC Inputs
          3. 26.2.10.4.3 SYNC Signal Conditioning and Rerouting
    3. 26.3 Software Initialization Sequence and Allocating Ownership
    4. 26.4 ESC Configuration Constants
    5. 26.5 EtherCAT IP Registers
      1. 26.5.1 ETHERCAT Base Address Table
      2. 26.5.2 ESCSS_REGS Registers
      3. 26.5.3 ESCSS_CONFIG_REGS Registers
      4. 26.5.4 ESC_SS Registers to Driverlib Functions
  29. 27Fast Serial Interface (FSI)
    1. 27.1 Introduction
      1. 27.1.1 FSI Related Collateral
      2. 27.1.2 FSI Features
    2. 27.2 System-level Integration
      1. 27.2.1 CPU Interface
      2. 27.2.2 Signal Description
        1. 27.2.2.1 Configuring Device Pins
      3. 27.2.3 FSI Interrupts
        1. 27.2.3.1 Transmitter Interrupts
        2. 27.2.3.2 Receiver Interrupts
        3. 27.2.3.3 Configuring Interrupts
        4. 27.2.3.4 Handling Interrupts
      4. 27.2.4 CLA Task Triggering
      5. 27.2.5 DMA Interface
      6. 27.2.6 External Frame Trigger Mux
    3. 27.3 FSI Functional Description
      1. 27.3.1  Introduction to Operation
      2. 27.3.2  FSI Transmitter Module
        1. 27.3.2.1 Initialization
        2. 27.3.2.2 FSI_TX Clocking
        3. 27.3.2.3 Transmitting Frames
          1. 27.3.2.3.1 Software Triggered Frames
          2. 27.3.2.3.2 Externally Triggered Frames
          3. 27.3.2.3.3 Ping Frame Generation
            1. 27.3.2.3.3.1 Automatic Ping Frames
            2. 27.3.2.3.3.2 Software Triggered Ping Frame
            3. 27.3.2.3.3.3 Externally Triggered Ping Frame
          4. 27.3.2.3.4 Transmitting Frames with DMA
        4. 27.3.2.4 Transmit Buffer Management
        5. 27.3.2.5 CRC Submodule
        6. 27.3.2.6 Conditions in Which the Transmitter Must Undergo a Soft Reset
        7. 27.3.2.7 Reset
      3. 27.3.3  FSI Receiver Module
        1. 27.3.3.1  Initialization
        2. 27.3.3.2  FSI_RX Clocking
        3. 27.3.3.3  Receiving Frames
          1. 27.3.3.3.1 Receiving Frames with DMA
        4. 27.3.3.4  Ping Frame Watchdog
        5. 27.3.3.5  Frame Watchdog
        6. 27.3.3.6  Delay Line Control
        7. 27.3.3.7  Buffer Management
        8. 27.3.3.8  CRC Submodule
        9. 27.3.3.9  Using the Zero Bits of the Receiver Tag Registers
        10. 27.3.3.10 Conditions in Which the Receiver Must Undergo a Soft Reset
        11. 27.3.3.11 FSI_RX Reset
      4. 27.3.4  Frame Format
        1. 27.3.4.1 FSI Frame Phases
        2. 27.3.4.2 Frame Types
          1. 27.3.4.2.1 Ping Frames
          2. 27.3.4.2.2 Error Frames
          3. 27.3.4.2.3 Data Frames
        3. 27.3.4.3 Multi-Lane Transmission
      5. 27.3.5  Flush Sequence
      6. 27.3.6  Internal Loopback
      7. 27.3.7  CRC Generation
      8. 27.3.8  ECC Module
      9. 27.3.9  Tag Matching
      10. 27.3.10 User Data Filtering (UDATA Matching)
      11. 27.3.11 TDM Configurations
      12. 27.3.12 FSI Trigger Generation
      13. 27.3.13 FSI-SPI Compatibility Mode
        1. 27.3.13.1 Available SPI Modes
          1. 27.3.13.1.1 FSITX as SPI Controller, Transmit Only
            1. 27.3.13.1.1.1 Initialization
            2. 27.3.13.1.1.2 Operation
          2. 27.3.13.1.2 FSIRX as SPI Peripheral, Receive Only
            1. 27.3.13.1.2.1 Initialization
            2. 27.3.13.1.2.2 Operation
          3. 27.3.13.1.3 FSITX and FSIRX Emulating a Full Duplex SPI Controller
            1. 27.3.13.1.3.1 Initialization
            2. 27.3.13.1.3.2 Operation
    4. 27.4 FSI Programing Guide
      1. 27.4.1 Establishing the Communication Link
        1. 27.4.1.1 Establishing the Communication Link from the Main Device
        2. 27.4.1.2 Establishing the Communication Link from the Remote Device
      2. 27.4.2 Register Protection
      3. 27.4.3 Emulation Mode
    5. 27.5 Software
      1. 27.5.1 FSI Examples
        1. 27.5.1.1 FSI Loopback:CPU Control - SINGLE_CORE
        2. 27.5.1.2 FSI data transfers upon CPU Timer event - SINGLE_CORE
    6. 27.6 FSI Registers
      1. 27.6.1 FSI Base Address Table
      2. 27.6.2 FSI_TX_REGS Registers
      3. 27.6.3 FSI_RX_REGS Registers
      4. 27.6.4 FSI Registers to Driverlib Functions
  30. 28Inter-Integrated Circuit Module (I2C)
    1. 28.1 Introduction
      1. 28.1.1 I2C Related Collateral
      2. 28.1.2 Features
      3. 28.1.3 Features Not Supported
      4. 28.1.4 Functional Overview
      5. 28.1.5 Clock Generation
      6. 28.1.6 I2C Clock Divider Registers (I2CCLKL and I2CCLKH)
        1. 28.1.6.1 Formula for the Controller Clock Period
    2. 28.2 Configuring Device Pins
    3. 28.3 I2C Module Operational Details
      1. 28.3.1  Input and Output Voltage Levels
      2. 28.3.2  Selecting Pullup Resistors
      3. 28.3.3  Data Validity
      4. 28.3.4  Operating Modes
      5. 28.3.5  I2C Module START and STOP Conditions
      6. 28.3.6  Non-repeat Mode versus Repeat Mode
      7. 28.3.7  Serial Data Formats
        1. 28.3.7.1 7-Bit Addressing Format
        2. 28.3.7.2 10-Bit Addressing Format
        3. 28.3.7.3 Free Data Format
        4. 28.3.7.4 Using a Repeated START Condition
      8. 28.3.8  Clock Synchronization
      9. 28.3.9  Arbitration
      10. 28.3.10 Digital Loopback Mode
      11. 28.3.11 NACK Bit Generation
    4. 28.4 Interrupt Requests Generated by the I2C Module
      1. 28.4.1 Basic I2C Interrupt Requests
      2. 28.4.2 I2C FIFO Interrupts
    5. 28.5 Resetting or Disabling the I2C Module
    6. 28.6 Software
      1. 28.6.1 I2C Examples
        1. 28.6.1.1 I2C Digital Loopback with FIFO Interrupts - SINGLE_CORE
        2. 28.6.1.2 I2C EEPROM - SINGLE_CORE
        3. 28.6.1.3 I2C Digital External Loopback with FIFO Interrupts - SINGLE_CORE
        4. 28.6.1.4 I2C Extended Clock Stretching Controller TX - SINGLE_CORE
        5. 28.6.1.5 I2C Extended Clock Stretching Target RX - SINGLE_CORE
    7. 28.7 I2C Registers
      1. 28.7.1 I2C Base Address Table
      2. 28.7.2 I2C_REGS Registers
      3. 28.7.3 I2C Registers to Driverlib Functions
  31. 29Power Management Bus Module (PMBus)
    1. 29.1 Introduction
      1. 29.1.1 PMBUS Related Collateral
      2. 29.1.2 Features
      3. 29.1.3 Block Diagram
    2. 29.2 Configuring Device Pins
    3. 29.3 Target Mode Operation
      1. 29.3.1 Configuration
      2. 29.3.2 Message Handling
        1. 29.3.2.1  Quick Command
        2. 29.3.2.2  Send Byte
        3. 29.3.2.3  Receive Byte
        4. 29.3.2.4  Write Byte and Write Word
        5. 29.3.2.5  Read Byte and Read Word
        6. 29.3.2.6  Process Call
        7. 29.3.2.7  Block Write
        8. 29.3.2.8  Block Read
        9. 29.3.2.9  Block Write-Block Read Process Call
        10. 29.3.2.10 Alert Response
        11. 29.3.2.11 Extended Command
        12. 29.3.2.12 Group Command
    4. 29.4 Controller Mode Operation
      1. 29.4.1 Configuration
      2. 29.4.2 Message Handling
        1. 29.4.2.1  Quick Command
        2. 29.4.2.2  Send Byte
        3. 29.4.2.3  Receive Byte
        4. 29.4.2.4  Write Byte and Write Word
        5. 29.4.2.5  Read Byte and Read Word
        6. 29.4.2.6  Process Call
        7. 29.4.2.7  Block Write
        8. 29.4.2.8  Block Read
        9. 29.4.2.9  Block Write-Block Read Process Call
        10. 29.4.2.10 Alert Response
        11. 29.4.2.11 Extended Command
        12. 29.4.2.12 Group Command
    5. 29.5 PMBUS Registers
      1. 29.5.1 PMBUS Base Address Table
      2. 29.5.2 PMBUS_REGS Registers
      3. 29.5.3 PMBUS Registers to Driverlib Functions
  32. 30Serial Communications Interface (SCI)
    1. 30.1  Introduction
      1. 30.1.1 Features
      2. 30.1.2 SCI Related Collateral
      3. 30.1.3 Block Diagram
    2. 30.2  Architecture
    3. 30.3  SCI Module Signal Summary
    4. 30.4  Configuring Device Pins
    5. 30.5  Multiprocessor and Asynchronous Communication Modes
    6. 30.6  SCI Programmable Data Format
    7. 30.7  SCI Multiprocessor Communication
      1. 30.7.1 Recognizing the Address Byte
      2. 30.7.2 Controlling the SCI TX and RX Features
      3. 30.7.3 Receipt Sequence
    8. 30.8  Idle-Line Multiprocessor Mode
      1. 30.8.1 Idle-Line Mode Steps
      2. 30.8.2 Block Start Signal
      3. 30.8.3 Wake-Up Temporary (WUT) Flag
        1. 30.8.3.1 Sending a Block Start Signal
      4. 30.8.4 Receiver Operation
    9. 30.9  Address-Bit Multiprocessor Mode
      1. 30.9.1 Sending an Address
    10. 30.10 SCI Communication Format
      1. 30.10.1 Receiver Signals in Communication Modes
      2. 30.10.2 Transmitter Signals in Communication Modes
    11. 30.11 SCI Port Interrupts
      1. 30.11.1 Break Detect
    12. 30.12 SCI Baud Rate Calculations
    13. 30.13 SCI Enhanced Features
      1. 30.13.1 SCI FIFO Description
      2. 30.13.2 SCI Auto-Baud
      3. 30.13.3 Autobaud-Detect Sequence
    14. 30.14 Software
      1. 30.14.1 SCI Examples
        1. 30.14.1.1 Tune Baud Rate via UART Example
        2. 30.14.1.2 SCI FIFO Digital Loop Back
        3. 30.14.1.3 SCI Digital Loop Back with Interrupts
        4. 30.14.1.4 SCI Echoback
        5. 30.14.1.5 stdout redirect example
    15. 30.15 SCI Registers
      1. 30.15.1 SCI Base Address Table
      2. 30.15.2 SCI_REGS Registers
      3. 30.15.3 SCI Registers to Driverlib Functions
  33. 31Serial Peripheral Interface (SPI)
    1. 31.1 Introduction
      1. 31.1.1 Features
      2. 31.1.2 SPI Related Collateral
      3. 31.1.3 Block Diagram
    2. 31.2 System-Level Integration
      1. 31.2.1 SPI Module Signals
      2. 31.2.2 Configuring Device Pins
        1. 31.2.2.1 GPIOs Required for High-Speed Mode
      3. 31.2.3 SPI Interrupts
      4. 31.2.4 DMA Support
    3. 31.3 SPI Operation
      1. 31.3.1  Introduction to Operation
      2. 31.3.2  Controller Mode
      3. 31.3.3  Peripheral Mode
      4. 31.3.4  Data Format
        1. 31.3.4.1 Transmission of Bit from SPIRXBUF
      5. 31.3.5  Baud Rate Selection
        1. 31.3.5.1 Baud Rate Determination
        2. 31.3.5.2 Baud Rate Calculation in Non-High Speed Mode (HS_MODE = 0)
      6. 31.3.6  SPI Clocking Schemes
      7. 31.3.7  SPI FIFO Description
      8. 31.3.8  SPI DMA Transfers
        1. 31.3.8.1 Transmitting Data Using SPI with DMA
        2. 31.3.8.2 Receiving Data Using SPI with DMA
      9. 31.3.9  SPI High-Speed Mode
      10. 31.3.10 SPI 3-Wire Mode Description
    4. 31.4 Programming Procedure
      1. 31.4.1 Initialization Upon Reset
      2. 31.4.2 Configuring the SPI
      3. 31.4.3 Configuring the SPI for High-Speed Mode
      4. 31.4.4 Data Transfer Example
      5. 31.4.5 SPI 3-Wire Mode Code Examples
        1. 31.4.5.1 3-Wire Controller Mode Transmit
        2.       1721
          1. 31.4.5.2.1 3-Wire Controller Mode Receive
        3.       1723
          1. 31.4.5.2.1 3-Wire Peripheral Mode Transmit
        4.       1725
          1. 31.4.5.2.1 3-Wire Peripheral Mode Receive
      6. 31.4.6 SPI STEINV Bit in Digital Audio Transfers
    5. 31.5 Software
      1. 31.5.1 SPI Examples
        1. 31.5.1.1 SPI Digital Loopback - SINGLE_CORE
        2. 31.5.1.2 SPI Digital Loopback with FIFO Interrupts - SINGLE_CORE
        3. 31.5.1.3 SPI Digital External Loopback without FIFO Interrupts - SINGLE_CORE
        4. 31.5.1.4 SPI Digital External Loopback with FIFO Interrupts - SINGLE_CORE
        5. 31.5.1.5 SPI Digital Loopback with DMA - SINGLE_CORE
    6. 31.6 SPI Registers
      1. 31.6.1 SPI Base Address Table
      2. 31.6.2 SPI_REGS Registers
      3. 31.6.3 SPI Registers to Driverlib Functions
  34. 32Universal Serial Bus (USB) Controller
    1. 32.1 Introduction
      1. 32.1.1 Features
      2. 32.1.2 USB Related Collateral
      3. 32.1.3 Block Diagram
        1. 32.1.3.1 Signal Description
        2. 32.1.3.2 VBus Recommendations
    2. 32.2 Functional Description
      1. 32.2.1 Operation as a Device
        1. 32.2.1.1 Control and Configurable Endpoints
          1. 32.2.1.1.1 IN Transactions as a Device
          2. 32.2.1.1.2 Out Transactions as a Device
          3. 32.2.1.1.3 Scheduling
          4. 32.2.1.1.4 Additional Actions
          5. 32.2.1.1.5 Device Mode Suspend
          6. 32.2.1.1.6 Start of Frame
          7. 32.2.1.1.7 USB Reset
          8. 32.2.1.1.8 Connect/Disconnect
      2. 32.2.2 Operation as a Host
        1. 32.2.2.1 Endpoint Registers
        2. 32.2.2.2 IN Transactions as a Host
        3. 32.2.2.3 OUT Transactions as a Host
        4. 32.2.2.4 Transaction Scheduling
        5. 32.2.2.5 USB Hubs
        6. 32.2.2.6 Babble
        7. 32.2.2.7 Host SUSPEND
        8. 32.2.2.8 USB RESET
        9. 32.2.2.9 Connect/Disconnect
      3. 32.2.3 DMA Operation
      4. 32.2.4 Address/Data Bus Bridge
    3. 32.3 Initialization and Configuration
      1. 32.3.1 Pin Configuration
      2. 32.3.2 Endpoint Configuration
    4. 32.4 USB Global Interrupts
    5. 32.5 Software
      1. 32.5.1 USB Examples
        1. 32.5.1.1  USB CDC serial example
        2. 32.5.1.2  USB HID Mouse Device
        3. 32.5.1.3  USB Device Keyboard
        4. 32.5.1.4  USB Generic Bulk Device
        5. 32.5.1.5  USB HID Mouse Host
        6. 32.5.1.6  USB HID Keyboard Host
        7. 32.5.1.7  USB Mass Storage Class Host
        8. 32.5.1.8  USB Dual Detect
        9. 32.5.1.9  USB Throughput Bulk Device Example (usb_ex9_throughput_dev_bulk)
        10. 32.5.1.10 USB HUB Host example
    6. 32.6 USB Registers
      1. 32.6.1 USB Base Address Table
      2. 32.6.2 USB_REGS Registers
      3. 32.6.3 USB Registers to Driverlib Functions
  35. 33Advanced Encryption Standard (AES) Accelerator
    1. 33.1 Introduction
      1. 33.1.1 AES Block Diagram
        1. 33.1.1.1 Interfaces
        2. 33.1.1.2 AES Subsystem
        3. 33.1.1.3 AES Wide-Bus Engine
      2. 33.1.2 AES Algorithm
    2. 33.2 AES Operating Modes
      1. 33.2.1  GCM Operation
      2. 33.2.2  CCM Operation
      3. 33.2.3  XTS Operation
      4. 33.2.4  ECB Feedback Mode
      5. 33.2.5  CBC Feedback Mode
      6. 33.2.6  CTR and ICM Feedback Modes
      7. 33.2.7  CFB Mode
      8. 33.2.8  F8 Mode
      9. 33.2.9  F9 Operation
      10. 33.2.10 CBC-MAC Operation
    3. 33.3 Extended and Combined Modes of Operations
      1. 33.3.1 GCM Protocol Operation
      2. 33.3.2 CCM Protocol Operation
      3. 33.3.3 Hardware Requests
    4. 33.4 AES Module Programming Guide
      1. 33.4.1 AES Low-Level Programming Models
        1. 33.4.1.1 Global Initialization
        2. 33.4.1.2 AES Operating Modes Configuration
        3. 33.4.1.3 AES Mode Configurations
        4. 33.4.1.4 AES Events Servicing
    5. 33.5 Software
      1. 33.5.1 AES Examples
        1. 33.5.1.1 AES ECB Encryption Example
        2. 33.5.1.2 AES ECB De-cryption Example
        3. 33.5.1.3 AES GCM Encryption Example
        4. 33.5.1.4 AES GCM Decryption Example
    6. 33.6 AES Registers
      1. 33.6.1 AES Base Address Table
      2. 33.6.2 AES_REGS Registers
      3. 33.6.3 AES_SS_REGS Registers
      4. 33.6.4 Register to Driverlib Function Mapping
        1. 33.6.4.1 AES Registers to Driverlib Functions
        2. 33.6.4.2 AES_SS Registers to Driverlib Functions
  36. 34Embedded Pattern Generator (EPG)
    1. 34.1 Introduction
      1. 34.1.1 Features
      2. 34.1.2 EPG Block Diagram
      3. 34.1.3 EPG Related Collateral
    2. 34.2 Clock Generator Modules
      1. 34.2.1 DCLK (50% duty cycle clock)
      2. 34.2.2 Clock Stop
    3. 34.3 Signal Generator Module
    4. 34.4 EPG Peripheral Signal Mux Selection
    5. 34.5 Application Software Notes
    6. 34.6 EPG Example Use Cases
      1. 34.6.1 EPG Example: Synchronous Clocks with Offset
        1. 34.6.1.1 Synchronous Clocks with Offset Register Configuration
      2. 34.6.2 EPG Example: Serial Data Bit Stream (LSB first)
        1. 34.6.2.1 Serial Data Bit Stream (LSB first) Register Configuration
      3. 34.6.3 EPG Example: Serial Data Bit Stream (MSB first)
        1. 34.6.3.1 Serial Data Bit Stream (MSB first) Register Configuration
      4. 34.6.4 EPG Example: Clock and Data Pair
        1. 34.6.4.1 Clock and Data Pair Register Configuration
      5. 34.6.5 EPG Example: Clock and Skewed Data Pair
        1. 34.6.5.1 Clock and Skewed Data Pair Register Configuration
      6. 34.6.6 EPG Example: Capturing Serial Data with a Known Baud Rate
        1. 34.6.6.1 Capturing Serial Data with a Known Baud Rate Register Configuration
    7. 34.7 EPG Interrupt
    8. 34.8 Software
      1. 34.8.1 EPG Examples
        1. 34.8.1.1 EPG Generating Synchronous Clocks - SINGLE_CORE
        2. 34.8.1.2 EPG Generating Two Offset Clocks - SINGLE_CORE
        3. 34.8.1.3 EPG Generating Two Offset Clocks With SIGGEN - SINGLE_CORE
        4. 34.8.1.4 EPG Generate Serial Data - SINGLE_CORE
        5. 34.8.1.5 EPG Generate Serial Data Shift Mode - SINGLE_CORE
    9. 34.9 EPG Registers
      1. 34.9.1 EPG Base Address Table
      2. 34.9.2 EPG_REGS Registers
      3. 34.9.3 EPG_MUX_REGS Registers
      4. 34.9.4 EPG Registers to Driverlib Functions
  37. 35Modular Controller Area Network (MCAN)
    1. 35.1 MCAN Introduction
      1. 35.1.1 MCAN Related Collateral
      2. 35.1.2 MCAN Features
    2. 35.2 MCAN Environment
    3. 35.3 CAN Network Basics
    4. 35.4 MCAN Integration
    5. 35.5 MCAN Functional Description
      1. 35.5.1  Module Clocking Requirements
      2. 35.5.2  Interrupt Requests
      3. 35.5.3  Operating Modes
        1. 35.5.3.1 Software Initialization
        2. 35.5.3.2 Normal Operation
        3. 35.5.3.3 CAN FD Operation
      4. 35.5.4  Transmitter Delay Compensation
        1. 35.5.4.1 Description
        2. 35.5.4.2 Transmitter Delay Compensation Measurement
      5. 35.5.5  Restricted Operation Mode
      6. 35.5.6  Bus Monitoring Mode
      7. 35.5.7  Disabled Automatic Retransmission (DAR) Mode
        1. 35.5.7.1 Frame Transmission in DAR Mode
      8. 35.5.8  Clock Stop Mode
        1. 35.5.8.1 Suspend Mode
        2. 35.5.8.2 Wakeup Request
      9. 35.5.9  Test Modes
        1. 35.5.9.1 External Loop Back Mode
        2. 35.5.9.2 Internal Loop Back Mode
      10. 35.5.10 Timestamp Generation
        1. 35.5.10.1 External Timestamp Counter
      11. 35.5.11 Timeout Counter
      12. 35.5.12 Safety
        1. 35.5.12.1 ECC Wrapper
        2. 35.5.12.2 ECC Aggregator
          1. 35.5.12.2.1 ECC Aggregator Overview
          2. 35.5.12.2.2 ECC Aggregator Registers
        3. 35.5.12.3 Reads to ECC Control and Status Registers
        4. 35.5.12.4 ECC Interrupts
      13. 35.5.13 Rx Handling
        1. 35.5.13.1 Acceptance Filtering
          1. 35.5.13.1.1 Range Filter
          2. 35.5.13.1.2 Filter for Specific IDs
          3. 35.5.13.1.3 Classic Bit Mask Filter
          4. 35.5.13.1.4 Standard Message ID Filtering
          5. 35.5.13.1.5 Extended Message ID Filtering
        2. 35.5.13.2 Rx FIFOs
          1. 35.5.13.2.1 Rx FIFO Blocking Mode
          2. 35.5.13.2.2 Rx FIFO Overwrite Mode
        3. 35.5.13.3 Dedicated Rx Buffers
          1. 35.5.13.3.1 Rx Buffer Handling
      14. 35.5.14 Tx Handling
        1. 35.5.14.1 Transmit Pause
        2. 35.5.14.2 Dedicated Tx Buffers
        3. 35.5.14.3 Tx FIFO
        4. 35.5.14.4 Tx Queue
        5. 35.5.14.5 Mixed Dedicated Tx Buffers/Tx FIFO
        6. 35.5.14.6 Mixed Dedicated Tx Buffers/Tx Queue
        7. 35.5.14.7 Transmit Cancellation
        8. 35.5.14.8 Tx Event Handling
      15. 35.5.15 FIFO Acknowledge Handling
      16. 35.5.16 Message RAM
        1. 35.5.16.1 Message RAM Configuration
        2. 35.5.16.2 Rx Buffer and FIFO Element
        3. 35.5.16.3 Tx Buffer Element
        4. 35.5.16.4 Tx Event FIFO Element
        5. 35.5.16.5 Standard Message ID Filter Element
        6. 35.5.16.6 Extended Message ID Filter Element
    6. 35.6 Software
      1. 35.6.1 MCAN Examples
        1. 35.6.1.1 MCAN Loopback with Interrupts Example Using SYSCONFIG Tool - SINGLE_CORE
        2. 35.6.1.2 MCAN Loopback with Polling Example Using SYSCONFIG Tool - SINGLE_CORE
    7. 35.7 MCAN Registers
      1. 35.7.1 MCAN Base Address Table
      2. 35.7.2 MCANSS_REGS Registers
      3. 35.7.3 MCAN_REGS Registers
      4. 35.7.4 MCAN_ERROR_REGS Registers
      5. 35.7.5 MCAN Registers to Driverlib Functions
  38. 36Universal Asynchronous Receiver/Transmitter (UART)
    1. 36.1 Introduction
      1. 36.1.1 Features
      2. 36.1.2 Block Diagram
    2. 36.2 Functional Description
      1. 36.2.1 Transmit and Receive Logic
      2. 36.2.2 Baud-Rate Generation
      3. 36.2.3 Data Transmission
      4. 36.2.4 Serial IR (SIR)
      5. 36.2.5 9-Bit UART Mode
      6. 36.2.6 FIFO Operation
      7. 36.2.7 Interrupts
      8. 36.2.8 Loopback Operation
      9. 36.2.9 DMA Operation
        1. 36.2.9.1 Receiving Data Using UART with DMA
        2. 36.2.9.2 Transmitting Data Using UART with DMA
    3. 36.3 Initialization and Configuration
    4. 36.4 Software
      1. 36.4.1 UART Examples
        1. 36.4.1.1 UART Loopback - SINGLE_CORE
        2. 36.4.1.2 UART Loopback with Interrupt - SINGLE_CORE
        3. 36.4.1.3 UART Loopback with DMA - SINGLE_CORE
    5. 36.5 UART Registers
      1. 36.5.1 UART Base Address Table
      2. 36.5.2 UART_REGS Registers
      3. 36.5.3 UART_REGS_WRITE Registers
      4. 36.5.4 UART Registers to Driverlib Functions
  39. 37Local Interconnect Network (LIN)
    1. 37.1 LIN Overview
      1. 37.1.1 SCI Features
      2. 37.1.2 LIN Features
      3. 37.1.3 LIN Related Collateral
      4. 37.1.4 Block Diagram
    2. 37.2 Serial Communications Interface Module
      1. 37.2.1 SCI Communication Formats
        1. 37.2.1.1 SCI Frame Formats
        2. 37.2.1.2 SCI Asynchronous Timing Mode
        3. 37.2.1.3 SCI Baud Rate
          1. 37.2.1.3.1 Superfractional Divider, SCI Asynchronous Mode
        4. 37.2.1.4 SCI Multiprocessor Communication Modes
          1. 37.2.1.4.1 Idle-Line Multiprocessor Modes
          2. 37.2.1.4.2 Address-Bit Multiprocessor Mode
        5. 37.2.1.5 SCI Multibuffered Mode
      2. 37.2.2 SCI Interrupts
        1. 37.2.2.1 Transmit Interrupt
        2. 37.2.2.2 Receive Interrupt
        3. 37.2.2.3 WakeUp Interrupt
        4. 37.2.2.4 Error Interrupts
      3. 37.2.3 SCI DMA Interface
        1. 37.2.3.1 Receive DMA Requests
        2. 37.2.3.2 Transmit DMA Requests
      4. 37.2.4 SCI Configurations
        1. 37.2.4.1 Receiving Data
          1. 37.2.4.1.1 Receiving Data in Single-Buffer Mode
          2. 37.2.4.1.2 Receiving Data in Multibuffer Mode
        2. 37.2.4.2 Transmitting Data
          1. 37.2.4.2.1 Transmitting Data in Single-Buffer Mode
          2. 37.2.4.2.2 Transmitting Data in Multibuffer Mode
      5. 37.2.5 SCI Low-Power Mode
        1. 37.2.5.1 Sleep Mode for Multiprocessor Communication
    3. 37.3 Local Interconnect Network Module
      1. 37.3.1 LIN Communication Formats
        1. 37.3.1.1  LIN Standards
        2. 37.3.1.2  Message Frame
          1. 37.3.1.2.1 Message Header
          2. 37.3.1.2.2 Response
        3. 37.3.1.3  Synchronizer
        4. 37.3.1.4  Baud Rate
          1. 37.3.1.4.1 Fractional Divider
          2. 37.3.1.4.2 Superfractional Divider
            1. 37.3.1.4.2.1 Superfractional Divider In LIN Mode
        5. 37.3.1.5  Header Generation
          1. 37.3.1.5.1 Event Triggered Frame Handling
          2. 37.3.1.5.2 Header Reception and Adaptive Baud Rate
        6. 37.3.1.6  Extended Frames Handling
        7. 37.3.1.7  Timeout Control
          1. 37.3.1.7.1 No-Response Error (NRE)
          2. 37.3.1.7.2 Bus Idle Detection
          3. 37.3.1.7.3 Timeout After Wakeup Signal and Timeout After Three Wakeup Signals
        8. 37.3.1.8  TXRX Error Detector (TED)
          1. 37.3.1.8.1 Bit Errors
          2. 37.3.1.8.2 Physical Bus Errors
          3. 37.3.1.8.3 ID Parity Errors
          4. 37.3.1.8.4 Checksum Errors
        9. 37.3.1.9  Message Filtering and Validation
        10. 37.3.1.10 Receive Buffers
        11. 37.3.1.11 Transmit Buffers
      2. 37.3.2 LIN Interrupts
      3. 37.3.3 Servicing LIN Interrupts
      4. 37.3.4 LIN DMA Interface
        1. 37.3.4.1 LIN Receive DMA Requests
        2. 37.3.4.2 LIN Transmit DMA Requests
      5. 37.3.5 LIN Configurations
        1. 37.3.5.1 Receiving Data
          1. 37.3.5.1.1 Receiving Data in Single-Buffer Mode
          2. 37.3.5.1.2 Receiving Data in Multibuffer Mode
        2. 37.3.5.2 Transmitting Data
          1. 37.3.5.2.1 Transmitting Data in Single-Buffer Mode
          2. 37.3.5.2.2 Transmitting Data in Multibuffer Mode
    4. 37.4 Low-Power Mode
      1. 37.4.1 Entering Sleep Mode
      2. 37.4.2 Wakeup
      3. 37.4.3 Wakeup Timeouts
    5. 37.5 Emulation Mode
    6. 37.6 Software
      1. 37.6.1 LIN Examples
        1. 37.6.1.1 LIN Internal Loopback with Interrupts - SINGLE_CORE
        2. 37.6.1.2 LIN SCI Mode Internal Loopback with Interrupts - SINGLE_CORE
        3. 37.6.1.3 LIN SCI MODE Internal Loopback with DMA - SINGLE_CORE
        4. 37.6.1.4 LIN Internal Loopback without interrupts (polled mode) - SINGLE_CORE
        5. 37.6.1.5 LIN SCI MODE (Single Buffer) Internal Loopback with DMA - SINGLE_CORE
    7. 37.7 SCI/LIN Registers
      1. 37.7.1 LIN Base Address Table
      2. 37.7.2 LIN_REGS Registers
      3. 37.7.3 LIN Registers to Driverlib Functions
  40. 38Lockstep Compare Module (LCM)
    1. 38.1 Introduction
      1. 38.1.1 Features
      2. 38.1.2 Block Diagram
    2. 38.2 Enabling LCM Comparators
    3. 38.3 Disabling LCM Redundant Module
    4. 38.4 LCM Error Handling
    5. 38.5 LCM Error Flags
    6. 38.6 Debug Mode with LCM
    7. 38.7 Register Parity Error Protection
    8. 38.8 Functional Logic
      1. 38.8.1 Comparator Logic
      2. 38.8.2 Self-Test Logic
        1. 38.8.2.1 Match Test Mode
        2. 38.8.2.2 Mismatch Test Mode
      3. 38.8.3 Error Injection Tests
        1. 38.8.3.1 Comparator Error Force Test
        2. 38.8.3.2 Register Parity Error Test
    9. 38.9 LCM Registers
      1. 38.9.1 LCM Base Address Table
      2. 38.9.2 LCM_REGS Registers
      3. 38.9.3 LCM Registers to Driverlib Functions
  41. 39Revision History

14.11.3 GPIO_DATA_REGS Registers

Table 14-153 lists the memory-mapped registers for the GPIO_DATA_REGS registers. All register offset addresses not listed in Table 14-153 should be considered as reserved locations and the register contents should not be modified.

Table 14-153 GPIO_DATA_REGS Registers
OffsetAcronymRegister NameWrite ProtectionSection
0hGPADATGPIO A Data Register (GPIO0 to 31)Go
2hGPASETGPIO A Data Set Register (GPIO0 to 31)Go
4hGPACLEARGPIO A Data Clear Register (GPIO0 to 31)Go
6hGPATOGGLEGPIO A Data Toggle Register (GPIO0 to 31)Go
8hGPBDATGPIO B Data Register (GPIO32 to 63)Go
AhGPBSETGPIO B Data Set Register (GPIO32 to 63)Go
ChGPBCLEARGPIO B Data Clear Register (GPIO32 to 63)Go
EhGPBTOGGLEGPIO B Data Toggle Register (GPIO32 to 63)Go
10hGPCDATGPIO C Data Register (GPIO64 to 95)Go
12hGPCSETGPIO C Data Set Register (GPIO64 to 95)Go
14hGPCCLEARGPIO C Data Clear Register (GPIO64 to 95)Go
16hGPCTOGGLEGPIO C Data Toggle Register (GPIO64 to 95)Go
18hGPDDATGPIO D Data Register (GPIO96 to 127)Go
1AhGPDSETGPIO D Data Set Register (GPIO96 to 127)Go
1ChGPDCLEARGPIO D Data Clear Register (GPIO96 to 127)Go
1EhGPDTOGGLEGPIO D Data Toggle Register (GPIO96 to 127)Go
20hGPEDATGPIO E Data Register (GPIO128 to 159)Go
22hGPESETGPIO E Data Set Register (GPIO128 to 159)Go
24hGPECLEARGPIO E Data Clear Register (GPIO128 to 159)Go
26hGPETOGGLEGPIO E Data Toggle Register (GPIO128 to 159)Go
28hGPFDATGPIO F Data Register (GPIO160 to 191)Go
2AhGPFSETGPIO F Data Set Register (GPIO160 to 191)Go
2ChGPFCLEARGPIO F Data Clear Register (GPIO160 to 191)Go
2EhGPFTOGGLEGPIO F Data Toggle Register (GPIO160 to 191)Go
30hGPGDATGPIO G Data Register (GPIO192 to 223)Go
32hGPGSETGPIO G Data Set Register (GPIO192 to 223)Go
34hGPGCLEARGPIO G Data Clear Register (GPIO192 to 223)Go
36hGPGTOGGLEGPIO G Data Toggle Register (GPIO192 to 223)Go
38hGPHDATGPIO H Data Register (GPIO224 to 255)Go
3AhGPHSETGPIO H Data Set Register (GPIO224 to 255)Go
3ChGPHCLEARGPIO H Data Clear Register (GPIO224 to 255)Go
3EhGPHTOGGLEGPIO H Data Toggle Register (GPIO224 to 255)Go

Complex bit access types are encoded to fit into small table cells. Table 14-154 shows the codes that are used for access types in this section.

Table 14-154 GPIO_DATA_REGS Access Type Codes
Access TypeCodeDescription
Read Type
RRRead
R-0R
-0		Read
Returns 0s
Write Type
WWWrite
Reset or Default Value
-nValue after reset or the default value
Register Array Variables
i,j,k,l,m,nWhen these variables are used in a register name, an offset, or an address, they refer to the value of a register array where the register is part of a group of repeating registers. The register groups form a hierarchical structure and the array is represented with a formula.
yWhen this variable is used in a register name, an offset, or an address it refers to the value of a register array.

14.11.3.1 GPADAT Register (Offset = 0h) [Reset = 00000000h]

GPADAT is shown in Figure 14-144 and described in Table 14-155.

Return to the Summary Table.

GPIO A Data Register (GPIO0 to 31)

Reading this register indicates the current status of the GPIO pin, irrespective of which mode the pin is in. Writing to this register will set the GPIO pin high or low if the pin is enabled for GPIO output mode, otherwise the value written is latched but ignored. The state of the output register latch will remain in its current state until the next write operation. A system reset will clear all bits and latched values to zero.

DESIGNER NOTE:
[1] Reading the GPIODAT register should reflect the state of the PIN (after qualification), not the state of the output latch of the GPIODAT register.

Figure 14-144 GPADAT Register
3130292827262524
GPIO31GPIO30GPIO29GPIO28GPIO27GPIO26GPIO25GPIO24
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
2322212019181716
GPIO23GPIO22GPIO21GPIO20GPIO19GPIO18GPIO17GPIO16
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
15141312111098
GPIO15GPIO14GPIO13GPIO12GPIO11GPIO10GPIO9GPIO8
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
76543210
GPIO7GPIO6GPIO5GPIO4GPIO3GPIO2GPIO1GPIO0
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
Table 14-155 GPADAT Register Field Descriptions
BitFieldTypeResetDescription
31GPIO31R/W0hData Register for this pin

Reset type: SYSRSn

30GPIO30R/W0hData Register for this pin

Reset type: SYSRSn

29GPIO29R/W0hData Register for this pin

Reset type: SYSRSn

28GPIO28R/W0hData Register for this pin

Reset type: SYSRSn

27GPIO27R/W0hData Register for this pin

Reset type: SYSRSn

26GPIO26R/W0hData Register for this pin

Reset type: SYSRSn

25GPIO25R/W0hData Register for this pin

Reset type: SYSRSn

24GPIO24R/W0hData Register for this pin

Reset type: SYSRSn

23GPIO23R/W0hData Register for this pin

Reset type: SYSRSn

22GPIO22R/W0hData Register for this pin

Reset type: SYSRSn

21GPIO21R/W0hData Register for this pin

Reset type: SYSRSn

20GPIO20R/W0hData Register for this pin

Reset type: SYSRSn

19GPIO19R/W0hData Register for this pin

Reset type: SYSRSn

18GPIO18R/W0hData Register for this pin

Reset type: SYSRSn

17GPIO17R/W0hData Register for this pin

Reset type: SYSRSn

16GPIO16R/W0hData Register for this pin

Reset type: SYSRSn

15GPIO15R/W0hData Register for this pin

Reset type: SYSRSn

14GPIO14R/W0hData Register for this pin

Reset type: SYSRSn

13GPIO13R/W0hData Register for this pin

Reset type: SYSRSn

12GPIO12R/W0hData Register for this pin

Reset type: SYSRSn

11GPIO11R/W0hData Register for this pin

Reset type: SYSRSn

10GPIO10R/W0hData Register for this pin

Reset type: SYSRSn

9GPIO9R/W0hData Register for this pin

Reset type: SYSRSn

8GPIO8R/W0hData Register for this pin

Reset type: SYSRSn

7GPIO7R/W0hData Register for this pin

Reset type: SYSRSn

6GPIO6R/W0hData Register for this pin

Reset type: SYSRSn

5GPIO5R/W0hData Register for this pin

Reset type: SYSRSn

4GPIO4R/W0hData Register for this pin

Reset type: SYSRSn

3GPIO3R/W0hData Register for this pin

Reset type: SYSRSn

2GPIO2R/W0hData Register for this pin

Reset type: SYSRSn

1GPIO1R/W0hData Register for this pin

Reset type: SYSRSn

0GPIO0R/W0hData Register for this pin

Reset type: SYSRSn

14.11.3.2 GPASET Register (Offset = 2h) [Reset = 00000000h]

GPASET is shown in Figure 14-145 and described in Table 14-156.

Return to the Summary Table.

GPIO A Data Set Register (GPIO0 to 31)

Writing a 1 will force GPIO output data latch to 1.
Writes of 0 are ignored.
Always reads back a 0.

Figure 14-145 GPASET Register
3130292827262524
GPIO31GPIO30GPIO29GPIO28GPIO27GPIO26GPIO25GPIO24
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
2322212019181716
GPIO23GPIO22GPIO21GPIO20GPIO19GPIO18GPIO17GPIO16
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
15141312111098
GPIO15GPIO14GPIO13GPIO12GPIO11GPIO10GPIO9GPIO8
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
76543210
GPIO7GPIO6GPIO5GPIO4GPIO3GPIO2GPIO1GPIO0
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
Table 14-156 GPASET Register Field Descriptions
BitFieldTypeResetDescription
31GPIO31R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

30GPIO30R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

29GPIO29R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

28GPIO28R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

27GPIO27R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

26GPIO26R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

25GPIO25R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

24GPIO24R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

23GPIO23R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

22GPIO22R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

21GPIO21R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

20GPIO20R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

19GPIO19R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

18GPIO18R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

17GPIO17R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

16GPIO16R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

15GPIO15R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

14GPIO14R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

13GPIO13R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

12GPIO12R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

11GPIO11R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

10GPIO10R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

9GPIO9R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

8GPIO8R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

7GPIO7R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

6GPIO6R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

5GPIO5R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

4GPIO4R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

3GPIO3R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

2GPIO2R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

1GPIO1R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

0GPIO0R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

14.11.3.3 GPACLEAR Register (Offset = 4h) [Reset = 00000000h]

GPACLEAR is shown in Figure 14-146 and described in Table 14-157.

Return to the Summary Table.

GPIO A Data Clear Register (GPIO0 to 31)

Writing a 1 will force GPIO0 output data latch to 0.
Writes of 0 are ignored.
Always reads back a 0.

Figure 14-146 GPACLEAR Register
3130292827262524
GPIO31GPIO30GPIO29GPIO28GPIO27GPIO26GPIO25GPIO24
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
2322212019181716
GPIO23GPIO22GPIO21GPIO20GPIO19GPIO18GPIO17GPIO16
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
15141312111098
GPIO15GPIO14GPIO13GPIO12GPIO11GPIO10GPIO9GPIO8
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
76543210
GPIO7GPIO6GPIO5GPIO4GPIO3GPIO2GPIO1GPIO0
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
Table 14-157 GPACLEAR Register Field Descriptions
BitFieldTypeResetDescription
31GPIO31R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

30GPIO30R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

29GPIO29R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

28GPIO28R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

27GPIO27R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

26GPIO26R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

25GPIO25R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

24GPIO24R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

23GPIO23R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

22GPIO22R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

21GPIO21R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

20GPIO20R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

19GPIO19R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

18GPIO18R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

17GPIO17R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

16GPIO16R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

15GPIO15R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

14GPIO14R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

13GPIO13R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

12GPIO12R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

11GPIO11R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

10GPIO10R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

9GPIO9R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

8GPIO8R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

7GPIO7R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

6GPIO6R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

5GPIO5R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

4GPIO4R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

3GPIO3R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

2GPIO2R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

1GPIO1R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

0GPIO0R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

14.11.3.4 GPATOGGLE Register (Offset = 6h) [Reset = 00000000h]

GPATOGGLE is shown in Figure 14-147 and described in Table 14-158.

Return to the Summary Table.

GPIO A Data Toggle Register (GPIO0 to 31)

Writing a 1 will toggle GPIO0 output data latch 1 to 0 or 0 to 1.
Writes of 0 are ignored.
Always reads back a 0.

Figure 14-147 GPATOGGLE Register
3130292827262524
GPIO31GPIO30GPIO29GPIO28GPIO27GPIO26GPIO25GPIO24
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
2322212019181716
GPIO23GPIO22GPIO21GPIO20GPIO19GPIO18GPIO17GPIO16
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
15141312111098
GPIO15GPIO14GPIO13GPIO12GPIO11GPIO10GPIO9GPIO8
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
76543210
GPIO7GPIO6GPIO5GPIO4GPIO3GPIO2GPIO1GPIO0
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
Table 14-158 GPATOGGLE Register Field Descriptions
BitFieldTypeResetDescription
31GPIO31R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

30GPIO30R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

29GPIO29R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

28GPIO28R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

27GPIO27R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

26GPIO26R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

25GPIO25R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

24GPIO24R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

23GPIO23R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

22GPIO22R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

21GPIO21R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

20GPIO20R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

19GPIO19R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

18GPIO18R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

17GPIO17R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

16GPIO16R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

15GPIO15R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

14GPIO14R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

13GPIO13R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

12GPIO12R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

11GPIO11R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

10GPIO10R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

9GPIO9R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

8GPIO8R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

7GPIO7R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

6GPIO6R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

5GPIO5R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

4GPIO4R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

3GPIO3R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

2GPIO2R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

1GPIO1R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

0GPIO0R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

14.11.3.5 GPBDAT Register (Offset = 8h) [Reset = 00000000h]

GPBDAT is shown in Figure 14-148 and described in Table 14-159.

Return to the Summary Table.

GPIO B Data Register (GPIO32 to 63)

Reading this register indicates the current status of the GPIO pin, irrespective of which mode the pin is in. Writing to this register will set the GPIO pin high or low if the pin is enabled for GPIO output mode, otherwise the value written is latched but ignored. The state of the output register latch will remain in its current state until the next write operation. A system reset will clear all bits and latched values to zero.

DESIGNER NOTE:
[1] Reading the GPIODAT register should reflect the state of the PIN (after qualification), not the state of the output latch of the GPIODAT register.

Figure 14-148 GPBDAT Register
3130292827262524
GPIO63GPIO62GPIO61GPIO60GPIO59GPIO58GPIO57GPIO56
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
2322212019181716
GPIO55GPIO54GPIO53GPIO52GPIO51GPIO50GPIO49GPIO48
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
15141312111098
GPIO47GPIO46GPIO45GPIO44GPIO43GPIO42GPIO41GPIO40
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
76543210
GPIO39GPIO38GPIO37GPIO36GPIO35GPIO34GPIO33GPIO32
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
Table 14-159 GPBDAT Register Field Descriptions
BitFieldTypeResetDescription
31GPIO63R/W0hData Register for this pin

Reset type: SYSRSn

30GPIO62R/W0hData Register for this pin

Reset type: SYSRSn

29GPIO61R/W0hData Register for this pin

Reset type: SYSRSn

28GPIO60R/W0hData Register for this pin

Reset type: SYSRSn

27GPIO59R/W0hData Register for this pin

Reset type: SYSRSn

26GPIO58R/W0hData Register for this pin

Reset type: SYSRSn

25GPIO57R/W0hData Register for this pin

Reset type: SYSRSn

24GPIO56R/W0hData Register for this pin

Reset type: SYSRSn

23GPIO55R/W0hData Register for this pin

Reset type: SYSRSn

22GPIO54R/W0hData Register for this pin

Reset type: SYSRSn

21GPIO53R/W0hData Register for this pin

Reset type: SYSRSn

20GPIO52R/W0hData Register for this pin

Reset type: SYSRSn

19GPIO51R/W0hData Register for this pin

Reset type: SYSRSn

18GPIO50R/W0hData Register for this pin

Reset type: SYSRSn

17GPIO49R/W0hData Register for this pin

Reset type: SYSRSn

16GPIO48R/W0hData Register for this pin

Reset type: SYSRSn

15GPIO47R/W0hData Register for this pin

Reset type: SYSRSn

14GPIO46R/W0hData Register for this pin

Reset type: SYSRSn

13GPIO45R/W0hData Register for this pin

Reset type: SYSRSn

12GPIO44R/W0hData Register for this pin

Reset type: SYSRSn

11GPIO43R/W0hData Register for this pin

Reset type: SYSRSn

10GPIO42R/W0hData Register for this pin

Reset type: SYSRSn

9GPIO41R/W0hData Register for this pin

Reset type: SYSRSn

8GPIO40R/W0hData Register for this pin

Reset type: SYSRSn

7GPIO39R/W0hData Register for this pin

Reset type: SYSRSn

6GPIO38R/W0hData Register for this pin

Reset type: SYSRSn

5GPIO37R/W0hData Register for this pin

Reset type: SYSRSn

4GPIO36R/W0hData Register for this pin

Reset type: SYSRSn

3GPIO35R/W0hData Register for this pin

Reset type: SYSRSn

2GPIO34R/W0hData Register for this pin

Reset type: SYSRSn

1GPIO33R/W0hData Register for this pin

Reset type: SYSRSn

0GPIO32R/W0hData Register for this pin

Reset type: SYSRSn

14.11.3.6 GPBSET Register (Offset = Ah) [Reset = 00000000h]

GPBSET is shown in Figure 14-149 and described in Table 14-160.

Return to the Summary Table.

GPIO B Data Set Register (GPIO32 to 63)

Writing a 1 will force GPIO output data latch to 1.
Writes of 0 are ignored.
Always reads back a 0.

Figure 14-149 GPBSET Register
3130292827262524
GPIO63GPIO62GPIO61GPIO60GPIO59GPIO58GPIO57GPIO56
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
2322212019181716
GPIO55GPIO54GPIO53GPIO52GPIO51GPIO50GPIO49GPIO48
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
15141312111098
GPIO47GPIO46GPIO45GPIO44GPIO43GPIO42GPIO41GPIO40
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
76543210
GPIO39GPIO38GPIO37GPIO36GPIO35GPIO34GPIO33GPIO32
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
Table 14-160 GPBSET Register Field Descriptions
BitFieldTypeResetDescription
31GPIO63R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

30GPIO62R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

29GPIO61R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

28GPIO60R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

27GPIO59R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

26GPIO58R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

25GPIO57R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

24GPIO56R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

23GPIO55R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

22GPIO54R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

21GPIO53R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

20GPIO52R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

19GPIO51R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

18GPIO50R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

17GPIO49R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

16GPIO48R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

15GPIO47R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

14GPIO46R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

13GPIO45R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

12GPIO44R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

11GPIO43R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

10GPIO42R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

9GPIO41R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

8GPIO40R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

7GPIO39R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

6GPIO38R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

5GPIO37R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

4GPIO36R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

3GPIO35R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

2GPIO34R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

1GPIO33R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

0GPIO32R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

14.11.3.7 GPBCLEAR Register (Offset = Ch) [Reset = 00000000h]

GPBCLEAR is shown in Figure 14-150 and described in Table 14-161.

Return to the Summary Table.

GPIO B Data Clear Register (GPIO32 to 63)

Writing a 1 will force GPIO0 output data latch to 0.
Writes of 0 are ignored.
Always reads back a 0.

Figure 14-150 GPBCLEAR Register
3130292827262524
GPIO63GPIO62GPIO61GPIO60GPIO59GPIO58GPIO57GPIO56
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
2322212019181716
GPIO55GPIO54GPIO53GPIO52GPIO51GPIO50GPIO49GPIO48
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
15141312111098
GPIO47GPIO46GPIO45GPIO44GPIO43GPIO42GPIO41GPIO40
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
76543210
GPIO39GPIO38GPIO37GPIO36GPIO35GPIO34GPIO33GPIO32
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
Table 14-161 GPBCLEAR Register Field Descriptions
BitFieldTypeResetDescription
31GPIO63R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

30GPIO62R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

29GPIO61R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

28GPIO60R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

27GPIO59R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

26GPIO58R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

25GPIO57R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

24GPIO56R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

23GPIO55R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

22GPIO54R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

21GPIO53R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

20GPIO52R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

19GPIO51R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

18GPIO50R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

17GPIO49R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

16GPIO48R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

15GPIO47R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

14GPIO46R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

13GPIO45R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

12GPIO44R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

11GPIO43R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

10GPIO42R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

9GPIO41R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

8GPIO40R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

7GPIO39R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

6GPIO38R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

5GPIO37R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

4GPIO36R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

3GPIO35R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

2GPIO34R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

1GPIO33R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

0GPIO32R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

14.11.3.8 GPBTOGGLE Register (Offset = Eh) [Reset = 00000000h]

GPBTOGGLE is shown in Figure 14-151 and described in Table 14-162.

Return to the Summary Table.

GPIO B Data Toggle Register (GPIO32 to 63)

Writing a 1 will toggle GPIO0 output data latch 1 to 0 or 0 to 1.
Writes of 0 are ignored.
Always reads back a 0.

Figure 14-151 GPBTOGGLE Register
3130292827262524
GPIO63GPIO62GPIO61GPIO60GPIO59GPIO58GPIO57GPIO56
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
2322212019181716
GPIO55GPIO54GPIO53GPIO52GPIO51GPIO50GPIO49GPIO48
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
15141312111098
GPIO47GPIO46GPIO45GPIO44GPIO43GPIO42GPIO41GPIO40
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
76543210
GPIO39GPIO38GPIO37GPIO36GPIO35GPIO34GPIO33GPIO32
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
Table 14-162 GPBTOGGLE Register Field Descriptions
BitFieldTypeResetDescription
31GPIO63R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

30GPIO62R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

29GPIO61R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

28GPIO60R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

27GPIO59R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

26GPIO58R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

25GPIO57R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

24GPIO56R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

23GPIO55R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

22GPIO54R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

21GPIO53R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

20GPIO52R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

19GPIO51R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

18GPIO50R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

17GPIO49R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

16GPIO48R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

15GPIO47R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

14GPIO46R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

13GPIO45R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

12GPIO44R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

11GPIO43R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

10GPIO42R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

9GPIO41R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

8GPIO40R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

7GPIO39R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

6GPIO38R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

5GPIO37R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

4GPIO36R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

3GPIO35R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

2GPIO34R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

1GPIO33R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

0GPIO32R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

14.11.3.9 GPCDAT Register (Offset = 10h) [Reset = 00000000h]

GPCDAT is shown in Figure 14-152 and described in Table 14-163.

Return to the Summary Table.

GPIO C Data Register (GPIO64 to 95)

Reading this register indicates the current status of the GPIO pin, irrespective of which mode the pin is in. Writing to this register will set the GPIO pin high or low if the pin is enabled for GPIO output mode, otherwise the value written is latched but ignored. The state of the output register latch will remain in its current state until the next write operation. A system reset will clear all bits and latched values to zero.

DESIGNER NOTE:
[1] Reading the GPIODAT register should reflect the state of the PIN (after qualification), not the state of the output latch of the

Figure 14-152 GPCDAT Register
3130292827262524
GPIO95GPIO94GPIO93GPIO92GPIO91GPIO90GPIO89GPIO88
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
2322212019181716
GPIO87GPIO86GPIO85GPIO84GPIO83GPIO82GPIO81GPIO80
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
15141312111098
GPIO79GPIO78GPIO77GPIO76GPIO75GPIO74GPIO73GPIO72
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
76543210
GPIO71GPIO70GPIO69GPIO68GPIO67GPIO66GPIO65GPIO64
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
Table 14-163 GPCDAT Register Field Descriptions
BitFieldTypeResetDescription
31GPIO95R/W0hData Register for this pin

Reset type: SYSRSn

30GPIO94R/W0hData Register for this pin

Reset type: SYSRSn

29GPIO93R/W0hData Register for this pin

Reset type: SYSRSn

28GPIO92R/W0hData Register for this pin

Reset type: SYSRSn

27GPIO91R/W0hData Register for this pin

Reset type: SYSRSn

26GPIO90R/W0hData Register for this pin

Reset type: SYSRSn

25GPIO89R/W0hData Register for this pin

Reset type: SYSRSn

24GPIO88R/W0hData Register for this pin

Reset type: SYSRSn

23GPIO87R/W0hData Register for this pin

Reset type: SYSRSn

22GPIO86R/W0hData Register for this pin

Reset type: SYSRSn

21GPIO85R/W0hData Register for this pin

Reset type: SYSRSn

20GPIO84R/W0hData Register for this pin

Reset type: SYSRSn

19GPIO83R/W0hData Register for this pin

Reset type: SYSRSn

18GPIO82R/W0hData Register for this pin

Reset type: SYSRSn

17GPIO81R/W0hData Register for this pin

Reset type: SYSRSn

16GPIO80R/W0hData Register for this pin

Reset type: SYSRSn

15GPIO79R/W0hData Register for this pin

Reset type: SYSRSn

14GPIO78R/W0hData Register for this pin

Reset type: SYSRSn

13GPIO77R/W0hData Register for this pin

Reset type: SYSRSn

12GPIO76R/W0hData Register for this pin

Reset type: SYSRSn

11GPIO75R/W0hData Register for this pin

Reset type: SYSRSn

10GPIO74R/W0hData Register for this pin

Reset type: SYSRSn

9GPIO73R/W0hData Register for this pin

Reset type: SYSRSn

8GPIO72R/W0hData Register for this pin

Reset type: SYSRSn

7GPIO71R/W0hData Register for this pin

Reset type: SYSRSn

6GPIO70R/W0hData Register for this pin

Reset type: SYSRSn

5GPIO69R/W0hData Register for this pin

Reset type: SYSRSn

4GPIO68R/W0hData Register for this pin

Reset type: SYSRSn

3GPIO67R/W0hData Register for this pin

Reset type: SYSRSn

2GPIO66R/W0hData Register for this pin

Reset type: SYSRSn

1GPIO65R/W0hData Register for this pin

Reset type: SYSRSn

0GPIO64R/W0hData Register for this pin

Reset type: SYSRSn

14.11.3.10 GPCSET Register (Offset = 12h) [Reset = 00000000h]

GPCSET is shown in Figure 14-153 and described in Table 14-164.

Return to the Summary Table.

GPIO C Data Set Register (GPIO64 to 95)

Writing a 1 will force GPIO output data latch to 1.
Writes of 0 are ignored.
Always reads back a 0.

Figure 14-153 GPCSET Register
3130292827262524
GPIO95GPIO94GPIO93GPIO92GPIO91GPIO90GPIO89GPIO88
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
2322212019181716
GPIO87GPIO86GPIO85GPIO84GPIO83GPIO82GPIO81GPIO80
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
15141312111098
GPIO79GPIO78GPIO77GPIO76GPIO75GPIO74GPIO73GPIO72
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
76543210
GPIO71GPIO70GPIO69GPIO68GPIO67GPIO66GPIO65GPIO64
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
Table 14-164 GPCSET Register Field Descriptions
BitFieldTypeResetDescription
31GPIO95R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

30GPIO94R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

29GPIO93R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

28GPIO92R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

27GPIO91R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

26GPIO90R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

25GPIO89R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

24GPIO88R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

23GPIO87R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

22GPIO86R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

21GPIO85R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

20GPIO84R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

19GPIO83R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

18GPIO82R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

17GPIO81R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

16GPIO80R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

15GPIO79R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

14GPIO78R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

13GPIO77R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

12GPIO76R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

11GPIO75R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

10GPIO74R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

9GPIO73R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

8GPIO72R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

7GPIO71R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

6GPIO70R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

5GPIO69R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

4GPIO68R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

3GPIO67R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

2GPIO66R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

1GPIO65R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

0GPIO64R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

14.11.3.11 GPCCLEAR Register (Offset = 14h) [Reset = 00000000h]

GPCCLEAR is shown in Figure 14-154 and described in Table 14-165.

Return to the Summary Table.

GPIO C Data Clear Register (GPIO64 to 95)

Writing a 1 will force GPIO0 output data latch to 0.
Writes of 0 are ignored.
Always reads back a 0.

Figure 14-154 GPCCLEAR Register
3130292827262524
GPIO95GPIO94GPIO93GPIO92GPIO91GPIO90GPIO89GPIO88
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
2322212019181716
GPIO87GPIO86GPIO85GPIO84GPIO83GPIO82GPIO81GPIO80
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
15141312111098
GPIO79GPIO78GPIO77GPIO76GPIO75GPIO74GPIO73GPIO72
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
76543210
GPIO71GPIO70GPIO69GPIO68GPIO67GPIO66GPIO65GPIO64
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
Table 14-165 GPCCLEAR Register Field Descriptions
BitFieldTypeResetDescription
31GPIO95R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

30GPIO94R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

29GPIO93R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

28GPIO92R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

27GPIO91R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

26GPIO90R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

25GPIO89R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

24GPIO88R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

23GPIO87R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

22GPIO86R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

21GPIO85R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

20GPIO84R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

19GPIO83R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

18GPIO82R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

17GPIO81R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

16GPIO80R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

15GPIO79R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

14GPIO78R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

13GPIO77R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

12GPIO76R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

11GPIO75R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

10GPIO74R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

9GPIO73R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

8GPIO72R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

7GPIO71R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

6GPIO70R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

5GPIO69R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

4GPIO68R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

3GPIO67R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

2GPIO66R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

1GPIO65R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

0GPIO64R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

14.11.3.12 GPCTOGGLE Register (Offset = 16h) [Reset = 00000000h]

GPCTOGGLE is shown in Figure 14-155 and described in Table 14-166.

Return to the Summary Table.

GPIO C Data Toggle Register (GPIO64 to 95)

Writing a 1 will toggle GPIO0 output data latch 1 to 0 or 0 to 1.
Writes of 0 are ignored.
Always reads back a 0.

Figure 14-155 GPCTOGGLE Register
3130292827262524
GPIO95GPIO94GPIO93GPIO92GPIO91GPIO90GPIO89GPIO88
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
2322212019181716
GPIO87GPIO86GPIO85GPIO84GPIO83GPIO82GPIO81GPIO80
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
15141312111098
GPIO79GPIO78GPIO77GPIO76GPIO75GPIO74GPIO73GPIO72
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
76543210
GPIO71GPIO70GPIO69GPIO68GPIO67GPIO66GPIO65GPIO64
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
Table 14-166 GPCTOGGLE Register Field Descriptions
BitFieldTypeResetDescription
31GPIO95R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

30GPIO94R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

29GPIO93R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

28GPIO92R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

27GPIO91R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

26GPIO90R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

25GPIO89R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

24GPIO88R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

23GPIO87R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

22GPIO86R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

21GPIO85R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

20GPIO84R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

19GPIO83R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

18GPIO82R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

17GPIO81R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

16GPIO80R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

15GPIO79R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

14GPIO78R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

13GPIO77R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

12GPIO76R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

11GPIO75R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

10GPIO74R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

9GPIO73R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

8GPIO72R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

7GPIO71R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

6GPIO70R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

5GPIO69R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

4GPIO68R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

3GPIO67R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

2GPIO66R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

1GPIO65R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

0GPIO64R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

14.11.3.13 GPDDAT Register (Offset = 18h) [Reset = 00000000h]

GPDDAT is shown in Figure 14-156 and described in Table 14-167.

Return to the Summary Table.

GPIO D Data Register (GPIO96 to 127)

Reading this register indicates the current status of the GPIO pin, irrespective of which mode the pin is in. Writing to this register will set the GPIO pin high or low if the pin is enabled for GPIO output mode, otherwise the value written is latched but ignored. The state of the output register latch will remain in its current state until the next write operation. A system reset will clear all bits and latched values to zero.

DESIGNER NOTE:
[1] Reading the GPIODAT register should reflect the state of the PIN (after qualification), not the state of the output latch of the GPIODAT register.

Figure 14-156 GPDDAT Register
3130292827262524
GPIO127GPIO126GPIO125GPIO124GPIO123GPIO122RESERVEDGPIO120
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
2322212019181716
GPIO119RESERVEDRESERVEDGPIO116GPIO115GPIO114GPIO113GPIO112
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
15141312111098
GPIO111GPIO110GPIO109GPIO108GPIO107GPIO106GPIO105GPIO104
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
76543210
GPIO103GPIO102GPIO101GPIO100GPIO99GPIO98GPIO97GPIO96
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
Table 14-167 GPDDAT Register Field Descriptions
BitFieldTypeResetDescription
31GPIO127R/W0hData Register for this pin

Reset type: SYSRSn

30GPIO126R/W0hData Register for this pin

Reset type: SYSRSn

29GPIO125R/W0hData Register for this pin

Reset type: SYSRSn

28GPIO124R/W0hData Register for this pin

Reset type: SYSRSn

27GPIO123R/W0hData Register for this pin

Reset type: SYSRSn

26GPIO122R/W0hData Register for this pin

Reset type: SYSRSn

25RESERVEDR/W0hReserved
24GPIO120R/W0hData Register for this pin

Reset type: SYSRSn

23GPIO119R/W0hData Register for this pin

Reset type: SYSRSn

22RESERVEDR/W0hReserved
21RESERVEDR/W0hReserved
20GPIO116R/W0hData Register for this pin

Reset type: SYSRSn

19GPIO115R/W0hData Register for this pin

Reset type: SYSRSn

18GPIO114R/W0hData Register for this pin

Reset type: SYSRSn

17GPIO113R/W0hData Register for this pin

Reset type: SYSRSn

16GPIO112R/W0hData Register for this pin

Reset type: SYSRSn

15GPIO111R/W0hData Register for this pin

Reset type: SYSRSn

14GPIO110R/W0hData Register for this pin

Reset type: SYSRSn

13GPIO109R/W0hData Register for this pin

Reset type: SYSRSn

12GPIO108R/W0hData Register for this pin

Reset type: SYSRSn

11GPIO107R/W0hData Register for this pin

Reset type: SYSRSn

10GPIO106R/W0hData Register for this pin

Reset type: SYSRSn

9GPIO105R/W0hData Register for this pin

Reset type: SYSRSn

8GPIO104R/W0hData Register for this pin

Reset type: SYSRSn

7GPIO103R/W0hData Register for this pin

Reset type: SYSRSn

6GPIO102R/W0hData Register for this pin

Reset type: SYSRSn

5GPIO101R/W0hData Register for this pin

Reset type: SYSRSn

4GPIO100R/W0hData Register for this pin

Reset type: SYSRSn

3GPIO99R/W0hData Register for this pin

Reset type: SYSRSn

2GPIO98R/W0hData Register for this pin

Reset type: SYSRSn

1GPIO97R/W0hData Register for this pin

Reset type: SYSRSn

0GPIO96R/W0hData Register for this pin

Reset type: SYSRSn

14.11.3.14 GPDSET Register (Offset = 1Ah) [Reset = 00000000h]

GPDSET is shown in Figure 14-157 and described in Table 14-168.

Return to the Summary Table.

GPIO D Data Set Register (GPIO96 to 127)

Writing a 1 will force GPIO output data latch to 1.
Writes of 0 are ignored.
Always reads back a 0.

Figure 14-157 GPDSET Register
3130292827262524
GPIO127GPIO126GPIO125GPIO124GPIO123GPIO122RESERVEDGPIO120
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
2322212019181716
GPIO119RESERVEDRESERVEDGPIO116GPIO115GPIO114GPIO113GPIO112
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
15141312111098
GPIO111GPIO110GPIO109GPIO108GPIO107GPIO106GPIO105GPIO104
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
76543210
GPIO103GPIO102GPIO101GPIO100GPIO99GPIO98GPIO97GPIO96
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
Table 14-168 GPDSET Register Field Descriptions
BitFieldTypeResetDescription
31GPIO127R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

30GPIO126R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

29GPIO125R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

28GPIO124R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

27GPIO123R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

26GPIO122R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

25RESERVEDR-0/W0hReserved
24GPIO120R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

23GPIO119R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

22RESERVEDR-0/W0hReserved
21RESERVEDR-0/W0hReserved
20GPIO116R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

19GPIO115R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

18GPIO114R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

17GPIO113R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

16GPIO112R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

15GPIO111R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

14GPIO110R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

13GPIO109R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

12GPIO108R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

11GPIO107R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

10GPIO106R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

9GPIO105R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

8GPIO104R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

7GPIO103R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

6GPIO102R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

5GPIO101R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

4GPIO100R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

3GPIO99R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

2GPIO98R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

1GPIO97R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

0GPIO96R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

14.11.3.15 GPDCLEAR Register (Offset = 1Ch) [Reset = 00000000h]

GPDCLEAR is shown in Figure 14-158 and described in Table 14-169.

Return to the Summary Table.

GPIO D Data Clear Register (GPIO96 to 127)

Writing a 1 will force GPIO0 output data latch to 0.
Writes of 0 are ignored.
Always reads back a 0.

Figure 14-158 GPDCLEAR Register
3130292827262524
GPIO127GPIO126GPIO125GPIO124GPIO123GPIO122RESERVEDGPIO120
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
2322212019181716
GPIO119RESERVEDRESERVEDGPIO116GPIO115GPIO114GPIO113GPIO112
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
15141312111098
GPIO111GPIO110GPIO109GPIO108GPIO107GPIO106GPIO105GPIO104
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
76543210
GPIO103GPIO102GPIO101GPIO100GPIO99GPIO98GPIO97GPIO96
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
Table 14-169 GPDCLEAR Register Field Descriptions
BitFieldTypeResetDescription
31GPIO127R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

30GPIO126R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

29GPIO125R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

28GPIO124R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

27GPIO123R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

26GPIO122R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

25RESERVEDR-0/W0hReserved
24GPIO120R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

23GPIO119R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

22RESERVEDR-0/W0hReserved
21RESERVEDR-0/W0hReserved
20GPIO116R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

19GPIO115R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

18GPIO114R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

17GPIO113R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

16GPIO112R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

15GPIO111R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

14GPIO110R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

13GPIO109R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

12GPIO108R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

11GPIO107R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

10GPIO106R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

9GPIO105R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

8GPIO104R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

7GPIO103R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

6GPIO102R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

5GPIO101R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

4GPIO100R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

3GPIO99R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

2GPIO98R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

1GPIO97R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

0GPIO96R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

14.11.3.16 GPDTOGGLE Register (Offset = 1Eh) [Reset = 00000000h]

GPDTOGGLE is shown in Figure 14-159 and described in Table 14-170.

Return to the Summary Table.

GPIO D Data Toggle Register (GPIO96 to 127)

Writing a 1 will toggle GPIO0 output data latch 1 to 0 or 0 to 1.
Writes of 0 are ignored.
Always reads back a 0.

Figure 14-159 GPDTOGGLE Register
3130292827262524
GPIO127GPIO126GPIO125GPIO124GPIO123GPIO122RESERVEDGPIO120
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
2322212019181716
GPIO119RESERVEDRESERVEDGPIO116GPIO115GPIO114GPIO113GPIO112
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
15141312111098
GPIO111GPIO110GPIO109GPIO108GPIO107GPIO106GPIO105GPIO104
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
76543210
GPIO103GPIO102GPIO101GPIO100GPIO99GPIO98GPIO97GPIO96
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
Table 14-170 GPDTOGGLE Register Field Descriptions
BitFieldTypeResetDescription
31GPIO127R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

30GPIO126R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

29GPIO125R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

28GPIO124R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

27GPIO123R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

26GPIO122R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

25RESERVEDR-0/W0hReserved
24GPIO120R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

23GPIO119R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

22RESERVEDR-0/W0hReserved
21RESERVEDR-0/W0hReserved
20GPIO116R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

19GPIO115R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

18GPIO114R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

17GPIO113R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

16GPIO112R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

15GPIO111R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

14GPIO110R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

13GPIO109R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

12GPIO108R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

11GPIO107R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

10GPIO106R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

9GPIO105R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

8GPIO104R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

7GPIO103R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

6GPIO102R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

5GPIO101R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

4GPIO100R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

3GPIO99R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

2GPIO98R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

1GPIO97R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

0GPIO96R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

14.11.3.17 GPEDAT Register (Offset = 20h) [Reset = 00000000h]

GPEDAT is shown in Figure 14-160 and described in Table 14-171.

Return to the Summary Table.

GPIO E Data Register (GPIO128 to 159)

Reading this register indicates the current status of the GPIO pin, irrespective of which mode the pin is in. Writing to this register will set the GPIO pin high or low if the pin is enabled for GPIO output mode, otherwise the value written is latched but ignored. The state of the output register latch will remain in its current state until the next write operation. A system reset will clear all bits and latched values to zero.

DESIGNER NOTE:
[1] Reading the GPIODAT register should reflect the state of the PIN (after qualification), not the state of the output latch of the

Figure 14-160 GPEDAT Register
3130292827262524
GPIO159GPIO158GPIO157GPIO156GPIO155GPIO154GPIO153GPIO152
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
2322212019181716
GPIO151GPIO150GPIO149GPIO148GPIO147GPIO146GPIO145RESERVED
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
15141312111098
RESERVEDGPIO142GPIO141RESERVEDRESERVEDRESERVEDRESERVEDRESERVED
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
76543210
RESERVEDGPIO134GPIO133GPIO132GPIO131GPIO130GPIO129GPIO128
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
Table 14-171 GPEDAT Register Field Descriptions
BitFieldTypeResetDescription
31GPIO159R/W0hData Register for this pin

Reset type: SYSRSn

30GPIO158R/W0hData Register for this pin

Reset type: SYSRSn

29GPIO157R/W0hData Register for this pin

Reset type: SYSRSn

28GPIO156R/W0hData Register for this pin

Reset type: SYSRSn

27GPIO155R/W0hData Register for this pin

Reset type: SYSRSn

26GPIO154R/W0hData Register for this pin

Reset type: SYSRSn

25GPIO153R/W0hData Register for this pin

Reset type: SYSRSn

24GPIO152R/W0hData Register for this pin

Reset type: SYSRSn

23GPIO151R/W0hData Register for this pin

Reset type: SYSRSn

22GPIO150R/W0hData Register for this pin

Reset type: SYSRSn

21GPIO149R/W0hData Register for this pin

Reset type: SYSRSn

20GPIO148R/W0hData Register for this pin

Reset type: SYSRSn

19GPIO147R/W0hData Register for this pin

Reset type: SYSRSn

18GPIO146R/W0hData Register for this pin

Reset type: SYSRSn

17GPIO145R/W0hData Register for this pin

Reset type: SYSRSn

16RESERVEDR/W0hReserved
15RESERVEDR/W0hReserved
14GPIO142R/W0hData Register for this pin

Reset type: SYSRSn

13GPIO141R/W0hData Register for this pin

Reset type: SYSRSn

12RESERVEDR/W0hReserved
11RESERVEDR/W0hReserved
10RESERVEDR/W0hReserved
9RESERVEDR/W0hReserved
8RESERVEDR/W0hReserved
7RESERVEDR/W0hReserved
6GPIO134R/W0hData Register for this pin

Reset type: SYSRSn

5GPIO133R/W0hData Register for this pin

Reset type: SYSRSn

4GPIO132R/W0hData Register for this pin

Reset type: SYSRSn

3GPIO131R/W0hData Register for this pin

Reset type: SYSRSn

2GPIO130R/W0hData Register for this pin

Reset type: SYSRSn

1GPIO129R/W0hData Register for this pin

Reset type: SYSRSn

0GPIO128R/W0hData Register for this pin

Reset type: SYSRSn

14.11.3.18 GPESET Register (Offset = 22h) [Reset = 00000000h]

GPESET is shown in Figure 14-161 and described in Table 14-172.

Return to the Summary Table.

GPIO E Data Set Register (GPIO128 to 159)

Writing a 1 will force GPIO output data latch to 1.
Writes of 0 are ignored.
Always reads back a 0.

Figure 14-161 GPESET Register
3130292827262524
GPIO159GPIO158GPIO157GPIO156GPIO155GPIO154GPIO153GPIO152
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
2322212019181716
GPIO151GPIO150GPIO149GPIO148GPIO147GPIO146GPIO145RESERVED
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
15141312111098
RESERVEDGPIO142GPIO141RESERVEDRESERVEDRESERVEDRESERVEDRESERVED
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
76543210
RESERVEDGPIO134GPIO133GPIO132GPIO131GPIO130GPIO129GPIO128
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
Table 14-172 GPESET Register Field Descriptions
BitFieldTypeResetDescription
31GPIO159R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

30GPIO158R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

29GPIO157R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

28GPIO156R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

27GPIO155R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

26GPIO154R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

25GPIO153R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

24GPIO152R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

23GPIO151R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

22GPIO150R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

21GPIO149R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

20GPIO148R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

19GPIO147R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

18GPIO146R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

17GPIO145R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

16RESERVEDR-0/W0hReserved
15RESERVEDR-0/W0hReserved
14GPIO142R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

13GPIO141R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

12RESERVEDR-0/W0hReserved
11RESERVEDR-0/W0hReserved
10RESERVEDR-0/W0hReserved
9RESERVEDR-0/W0hReserved
8RESERVEDR-0/W0hReserved
7RESERVEDR-0/W0hReserved
6GPIO134R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

5GPIO133R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

4GPIO132R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

3GPIO131R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

2GPIO130R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

1GPIO129R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

0GPIO128R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

14.11.3.19 GPECLEAR Register (Offset = 24h) [Reset = 00000000h]

GPECLEAR is shown in Figure 14-162 and described in Table 14-173.

Return to the Summary Table.

GPIO E Data Clear Register (GPIO128 to 159)

Writing a 1 will force GPIO0 output data latch to 0.
Writes of 0 are ignored.
Always reads back a 0.

Figure 14-162 GPECLEAR Register
3130292827262524
GPIO159GPIO158GPIO157GPIO156GPIO155GPIO154GPIO153GPIO152
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
2322212019181716
GPIO151GPIO150GPIO149GPIO148GPIO147GPIO146GPIO145RESERVED
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
15141312111098
RESERVEDGPIO142GPIO141RESERVEDRESERVEDRESERVEDRESERVEDRESERVED
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
76543210
RESERVEDGPIO134GPIO133GPIO132GPIO131GPIO130GPIO129GPIO128
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
Table 14-173 GPECLEAR Register Field Descriptions
BitFieldTypeResetDescription
31GPIO159R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

30GPIO158R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

29GPIO157R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

28GPIO156R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

27GPIO155R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

26GPIO154R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

25GPIO153R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

24GPIO152R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

23GPIO151R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

22GPIO150R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

21GPIO149R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

20GPIO148R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

19GPIO147R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

18GPIO146R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

17GPIO145R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

16RESERVEDR-0/W0hReserved
15RESERVEDR-0/W0hReserved
14GPIO142R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

13GPIO141R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

12RESERVEDR-0/W0hReserved
11RESERVEDR-0/W0hReserved
10RESERVEDR-0/W0hReserved
9RESERVEDR-0/W0hReserved
8RESERVEDR-0/W0hReserved
7RESERVEDR-0/W0hReserved
6GPIO134R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

5GPIO133R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

4GPIO132R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

3GPIO131R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

2GPIO130R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

1GPIO129R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

0GPIO128R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

14.11.3.20 GPETOGGLE Register (Offset = 26h) [Reset = 00000000h]

GPETOGGLE is shown in Figure 14-163 and described in Table 14-174.

Return to the Summary Table.

GPIO E Data Toggle Register (GPIO128 to 159)

Writing a 1 will toggle GPIO0 output data latch 1 to 0 or 0 to 1.
Writes of 0 are ignored.
Always reads back a 0.

Figure 14-163 GPETOGGLE Register
3130292827262524
GPIO159GPIO158GPIO157GPIO156GPIO155GPIO154GPIO153GPIO152
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
2322212019181716
GPIO151GPIO150GPIO149GPIO148GPIO147GPIO146GPIO145RESERVED
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
15141312111098
RESERVEDGPIO142GPIO141RESERVEDRESERVEDRESERVEDRESERVEDRESERVED
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
76543210
RESERVEDGPIO134GPIO133GPIO132GPIO131GPIO130GPIO129GPIO128
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
Table 14-174 GPETOGGLE Register Field Descriptions
BitFieldTypeResetDescription
31GPIO159R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

30GPIO158R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

29GPIO157R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

28GPIO156R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

27GPIO155R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

26GPIO154R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

25GPIO153R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

24GPIO152R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

23GPIO151R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

22GPIO150R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

21GPIO149R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

20GPIO148R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

19GPIO147R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

18GPIO146R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

17GPIO145R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

16RESERVEDR-0/W0hReserved
15RESERVEDR-0/W0hReserved
14GPIO142R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

13GPIO141R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

12RESERVEDR-0/W0hReserved
11RESERVEDR-0/W0hReserved
10RESERVEDR-0/W0hReserved
9RESERVEDR-0/W0hReserved
8RESERVEDR-0/W0hReserved
7RESERVEDR-0/W0hReserved
6GPIO134R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

5GPIO133R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

4GPIO132R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

3GPIO131R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

2GPIO130R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

1GPIO129R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

0GPIO128R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

14.11.3.21 GPFDAT Register (Offset = 28h) [Reset = 00000000h]

GPFDAT is shown in Figure 14-164 and described in Table 14-175.

Return to the Summary Table.

GPIO F Data Register (GPIO160 to 191)

Reading this register indicates the current status of the GPIO pin, irrespective of which mode the pin is in. Writing to this register will set the GPIO pin high or low if the pin is enabled for GPIO output mode, otherwise the value written is latched but ignored. The state of the output register latch will remain in its current state until the next write operation. A system reset will clear all bits and latched values to zero.

DESIGNER NOTE:
[1] Reading the GPIODAT register should reflect the state of the PIN (after qualification), not the state of the output latch of the

Figure 14-164 GPFDAT Register
3130292827262524
RESERVEDRESERVEDRESERVEDRESERVEDRESERVEDRESERVEDRESERVEDRESERVED
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
2322212019181716
RESERVEDRESERVEDRESERVEDRESERVEDRESERVEDRESERVEDRESERVEDRESERVED
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
15141312111098
RESERVEDRESERVEDRESERVEDRESERVEDRESERVEDRESERVEDRESERVEDGPIO168
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
76543210
GPIO167GPIO166GPIO165GPIO164GPIO163GPIO162GPIO161GPIO160
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
Table 14-175 GPFDAT Register Field Descriptions
BitFieldTypeResetDescription
31RESERVEDR/W0hReserved
30RESERVEDR/W0hReserved
29RESERVEDR/W0hReserved
28RESERVEDR/W0hReserved
27RESERVEDR/W0hReserved
26RESERVEDR/W0hReserved
25RESERVEDR/W0hReserved
24RESERVEDR/W0hReserved
23RESERVEDR/W0hReserved
22RESERVEDR/W0hReserved
21RESERVEDR/W0hReserved
20RESERVEDR/W0hReserved
19RESERVEDR/W0hReserved
18RESERVEDR/W0hReserved
17RESERVEDR/W0hReserved
16RESERVEDR/W0hReserved
15RESERVEDR/W0hReserved
14RESERVEDR/W0hReserved
13RESERVEDR/W0hReserved
12RESERVEDR/W0hReserved
11RESERVEDR/W0hReserved
10RESERVEDR/W0hReserved
9RESERVEDR/W0hReserved
8GPIO168R/W0hData Register for this pin

Reset type: SYSRSn

7GPIO167R/W0hData Register for this pin

Reset type: SYSRSn

6GPIO166R/W0hData Register for this pin

Reset type: SYSRSn

5GPIO165R/W0hData Register for this pin

Reset type: SYSRSn

4GPIO164R/W0hData Register for this pin

Reset type: SYSRSn

3GPIO163R/W0hData Register for this pin

Reset type: SYSRSn

2GPIO162R/W0hData Register for this pin

Reset type: SYSRSn

1GPIO161R/W0hData Register for this pin

Reset type: SYSRSn

0GPIO160R/W0hData Register for this pin

Reset type: SYSRSn

14.11.3.22 GPFSET Register (Offset = 2Ah) [Reset = 00000000h]

GPFSET is shown in Figure 14-165 and described in Table 14-176.

Return to the Summary Table.

GPIO F Data Set Register (GPIO160 to 191)

Writing a 1 will force GPIO output data latch to 1.
Writes of 0 are ignored.
Always reads back a 0.

Figure 14-165 GPFSET Register
3130292827262524
RESERVEDRESERVEDRESERVEDRESERVEDRESERVEDRESERVEDRESERVEDRESERVED
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
2322212019181716
RESERVEDRESERVEDRESERVEDRESERVEDRESERVEDRESERVEDRESERVEDRESERVED
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
15141312111098
RESERVEDRESERVEDRESERVEDRESERVEDRESERVEDRESERVEDRESERVEDGPIO168
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
76543210
GPIO167GPIO166GPIO165GPIO164GPIO163GPIO162GPIO161GPIO160
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
Table 14-176 GPFSET Register Field Descriptions
BitFieldTypeResetDescription
31RESERVEDR-0/W0hReserved
30RESERVEDR-0/W0hReserved
29RESERVEDR-0/W0hReserved
28RESERVEDR-0/W0hReserved
27RESERVEDR-0/W0hReserved
26RESERVEDR-0/W0hReserved
25RESERVEDR-0/W0hReserved
24RESERVEDR-0/W0hReserved
23RESERVEDR-0/W0hReserved
22RESERVEDR-0/W0hReserved
21RESERVEDR-0/W0hReserved
20RESERVEDR-0/W0hReserved
19RESERVEDR-0/W0hReserved
18RESERVEDR-0/W0hReserved
17RESERVEDR-0/W0hReserved
16RESERVEDR-0/W0hReserved
15RESERVEDR-0/W0hReserved
14RESERVEDR-0/W0hReserved
13RESERVEDR-0/W0hReserved
12RESERVEDR-0/W0hReserved
11RESERVEDR-0/W0hReserved
10RESERVEDR-0/W0hReserved
9RESERVEDR-0/W0hReserved
8GPIO168R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

7GPIO167R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

6GPIO166R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

5GPIO165R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

4GPIO164R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

3GPIO163R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

2GPIO162R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

1GPIO161R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

0GPIO160R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

14.11.3.23 GPFCLEAR Register (Offset = 2Ch) [Reset = 00000000h]

GPFCLEAR is shown in Figure 14-166 and described in Table 14-177.

Return to the Summary Table.

GPIO F Data Clear Register (GPIO160 to 191)

Writing a 1 will force GPIO0 output data latch to 0.
Writes of 0 are ignored.
Always reads back a 0.

Figure 14-166 GPFCLEAR Register
3130292827262524
RESERVEDRESERVEDRESERVEDRESERVEDRESERVEDRESERVEDRESERVEDRESERVED
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
2322212019181716
RESERVEDRESERVEDRESERVEDRESERVEDRESERVEDRESERVEDRESERVEDRESERVED
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
15141312111098
RESERVEDRESERVEDRESERVEDRESERVEDRESERVEDRESERVEDRESERVEDGPIO168
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
76543210
GPIO167GPIO166GPIO165GPIO164GPIO163GPIO162GPIO161GPIO160
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
Table 14-177 GPFCLEAR Register Field Descriptions
BitFieldTypeResetDescription
31RESERVEDR-0/W0hReserved
30RESERVEDR-0/W0hReserved
29RESERVEDR-0/W0hReserved
28RESERVEDR-0/W0hReserved
27RESERVEDR-0/W0hReserved
26RESERVEDR-0/W0hReserved
25RESERVEDR-0/W0hReserved
24RESERVEDR-0/W0hReserved
23RESERVEDR-0/W0hReserved
22RESERVEDR-0/W0hReserved
21RESERVEDR-0/W0hReserved
20RESERVEDR-0/W0hReserved
19RESERVEDR-0/W0hReserved
18RESERVEDR-0/W0hReserved
17RESERVEDR-0/W0hReserved
16RESERVEDR-0/W0hReserved
15RESERVEDR-0/W0hReserved
14RESERVEDR-0/W0hReserved
13RESERVEDR-0/W0hReserved
12RESERVEDR-0/W0hReserved
11RESERVEDR-0/W0hReserved
10RESERVEDR-0/W0hReserved
9RESERVEDR-0/W0hReserved
8GPIO168R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

7GPIO167R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

6GPIO166R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

5GPIO165R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

4GPIO164R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

3GPIO163R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

2GPIO162R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

1GPIO161R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

0GPIO160R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

14.11.3.24 GPFTOGGLE Register (Offset = 2Eh) [Reset = 00000000h]

GPFTOGGLE is shown in Figure 14-167 and described in Table 14-178.

Return to the Summary Table.

GPIO F Data Toggle Register (GPIO160 to 191)

Writing a 1 will toggle GPIO0 output data latch 1 to 0 or 0 to 1.
Writes of 0 are ignored.
Always reads back a 0.

Figure 14-167 GPFTOGGLE Register
3130292827262524
RESERVEDRESERVEDRESERVEDRESERVEDRESERVEDRESERVEDRESERVEDRESERVED
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
2322212019181716
RESERVEDRESERVEDRESERVEDRESERVEDRESERVEDRESERVEDRESERVEDRESERVED
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
15141312111098
RESERVEDRESERVEDRESERVEDRESERVEDRESERVEDRESERVEDRESERVEDGPIO168
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
76543210
GPIO167GPIO166GPIO165GPIO164GPIO163GPIO162GPIO161GPIO160
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
Table 14-178 GPFTOGGLE Register Field Descriptions
BitFieldTypeResetDescription
31RESERVEDR-0/W0hReserved
30RESERVEDR-0/W0hReserved
29RESERVEDR-0/W0hReserved
28RESERVEDR-0/W0hReserved
27RESERVEDR-0/W0hReserved
26RESERVEDR-0/W0hReserved
25RESERVEDR-0/W0hReserved
24RESERVEDR-0/W0hReserved
23RESERVEDR-0/W0hReserved
22RESERVEDR-0/W0hReserved
21RESERVEDR-0/W0hReserved
20RESERVEDR-0/W0hReserved
19RESERVEDR-0/W0hReserved
18RESERVEDR-0/W0hReserved
17RESERVEDR-0/W0hReserved
16RESERVEDR-0/W0hReserved
15RESERVEDR-0/W0hReserved
14RESERVEDR-0/W0hReserved
13RESERVEDR-0/W0hReserved
12RESERVEDR-0/W0hReserved
11RESERVEDR-0/W0hReserved
10RESERVEDR-0/W0hReserved
9RESERVEDR-0/W0hReserved
8GPIO168R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

7GPIO167R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

6GPIO166R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

5GPIO165R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

4GPIO164R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

3GPIO163R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

2GPIO162R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

1GPIO161R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

0GPIO160R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

14.11.3.25 GPGDAT Register (Offset = 30h) [Reset = 00000000h]

GPGDAT is shown in Figure 14-168 and described in Table 14-179.

Return to the Summary Table.

GPIO G Data Register (GPIO192 to 223)

Reading this register indicates the current status of the GPIO pin, irrespective of which mode the pin is in. Writing to this register will set the GPIO pin high or low if the pin is enabled for GPIO output mode, otherwise the value written is latched but ignored. The state of the output register latch will remain in its current state until the next write operation. A system reset will clear all bits and latched values to zero.

DESIGNER NOTE:
[1] Reading the GPIODAT register should reflect the state of the PIN (after qualification), not the state of the output latch of the

Figure 14-168 GPGDAT Register
3130292827262524
GPIO223GPIO222GPIO221GPIO220GPIO219GPIO218GPIO217GPIO216
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
2322212019181716
GPIO215GPIO214GPIO213GPIO212GPIO211GPIO210GPIO209GPIO208
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
15141312111098
GPIO207GPIO206GPIO205GPIO204GPIO203GPIO202GPIO201GPIO200
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
76543210
GPIO199GPIO198RESERVEDRESERVEDRESERVEDRESERVEDRESERVEDRESERVED
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
Table 14-179 GPGDAT Register Field Descriptions
BitFieldTypeResetDescription
31GPIO223R/W0hData Register for this pin

Reset type: SYSRSn

30GPIO222R/W0hData Register for this pin

Reset type: SYSRSn

29GPIO221R/W0hData Register for this pin

Reset type: SYSRSn

28GPIO220R/W0hData Register for this pin

Reset type: SYSRSn

27GPIO219R/W0hData Register for this pin

Reset type: SYSRSn

26GPIO218R/W0hData Register for this pin

Reset type: SYSRSn

25GPIO217R/W0hData Register for this pin

Reset type: SYSRSn

24GPIO216R/W0hData Register for this pin

Reset type: SYSRSn

23GPIO215R/W0hData Register for this pin

Reset type: SYSRSn

22GPIO214R/W0hData Register for this pin

Reset type: SYSRSn

21GPIO213R/W0hData Register for this pin

Reset type: SYSRSn

20GPIO212R/W0hData Register for this pin

Reset type: SYSRSn

19GPIO211R/W0hData Register for this pin

Reset type: SYSRSn

18GPIO210R/W0hData Register for this pin

Reset type: SYSRSn

17GPIO209R/W0hData Register for this pin

Reset type: SYSRSn

16GPIO208R/W0hData Register for this pin

Reset type: SYSRSn

15GPIO207R/W0hData Register for this pin

Reset type: SYSRSn

14GPIO206R/W0hData Register for this pin

Reset type: SYSRSn

13GPIO205R/W0hData Register for this pin

Reset type: SYSRSn

12GPIO204R/W0hData Register for this pin

Reset type: SYSRSn

11GPIO203R/W0hData Register for this pin

Reset type: SYSRSn

10GPIO202R/W0hData Register for this pin

Reset type: SYSRSn

9GPIO201R/W0hData Register for this pin

Reset type: SYSRSn

8GPIO200R/W0hData Register for this pin

Reset type: SYSRSn

7GPIO199R/W0hData Register for this pin

Reset type: SYSRSn

6GPIO198R/W0hData Register for this pin

Reset type: SYSRSn

5RESERVEDR/W0hReserved
4RESERVEDR/W0hReserved
3RESERVEDR/W0hReserved
2RESERVEDR/W0hReserved
1RESERVEDR/W0hReserved
0RESERVEDR/W0hReserved

14.11.3.26 GPGSET Register (Offset = 32h) [Reset = 00000000h]

GPGSET is shown in Figure 14-169 and described in Table 14-180.

Return to the Summary Table.

GPIO G Data Set Register (GPIO192 to 223)

Writing a 1 will force GPIO output data latch to 1.
Writes of 0 are ignored.
Always reads back a 0.

Figure 14-169 GPGSET Register
3130292827262524
GPIO223GPIO222GPIO221GPIO220GPIO219GPIO218GPIO217GPIO216
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
2322212019181716
GPIO215GPIO214GPIO213GPIO212GPIO211GPIO210GPIO209GPIO208
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
15141312111098
GPIO207GPIO206GPIO205GPIO204GPIO203GPIO202GPIO201GPIO200
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
76543210
GPIO199GPIO198RESERVEDRESERVEDRESERVEDRESERVEDRESERVEDRESERVED
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
Table 14-180 GPGSET Register Field Descriptions
BitFieldTypeResetDescription
31GPIO223R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

30GPIO222R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

29GPIO221R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

28GPIO220R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

27GPIO219R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

26GPIO218R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

25GPIO217R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

24GPIO216R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

23GPIO215R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

22GPIO214R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

21GPIO213R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

20GPIO212R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

19GPIO211R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

18GPIO210R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

17GPIO209R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

16GPIO208R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

15GPIO207R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

14GPIO206R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

13GPIO205R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

12GPIO204R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

11GPIO203R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

10GPIO202R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

9GPIO201R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

8GPIO200R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

7GPIO199R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

6GPIO198R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

5RESERVEDR-0/W0hReserved
4RESERVEDR-0/W0hReserved
3RESERVEDR-0/W0hReserved
2RESERVEDR-0/W0hReserved
1RESERVEDR-0/W0hReserved
0RESERVEDR-0/W0hReserved

14.11.3.27 GPGCLEAR Register (Offset = 34h) [Reset = 00000000h]

GPGCLEAR is shown in Figure 14-170 and described in Table 14-181.

Return to the Summary Table.

GPIO G Data Clear Register (GPIO192 to 223)

Writing a 1 will force GPIO0 output data latch to 0.
Writes of 0 are ignored.
Always reads back a 0.

Figure 14-170 GPGCLEAR Register
3130292827262524
GPIO223GPIO222GPIO221GPIO220GPIO219GPIO218GPIO217GPIO216
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
2322212019181716
GPIO215GPIO214GPIO213GPIO212GPIO211GPIO210GPIO209GPIO208
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
15141312111098
GPIO207GPIO206GPIO205GPIO204GPIO203GPIO202GPIO201GPIO200
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
76543210
GPIO199GPIO198RESERVEDRESERVEDRESERVEDRESERVEDRESERVEDRESERVED
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
Table 14-181 GPGCLEAR Register Field Descriptions
BitFieldTypeResetDescription
31GPIO223R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

30GPIO222R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

29GPIO221R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

28GPIO220R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

27GPIO219R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

26GPIO218R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

25GPIO217R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

24GPIO216R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

23GPIO215R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

22GPIO214R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

21GPIO213R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

20GPIO212R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

19GPIO211R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

18GPIO210R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

17GPIO209R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

16GPIO208R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

15GPIO207R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

14GPIO206R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

13GPIO205R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

12GPIO204R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

11GPIO203R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

10GPIO202R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

9GPIO201R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

8GPIO200R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

7GPIO199R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

6GPIO198R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

5RESERVEDR-0/W0hReserved
4RESERVEDR-0/W0hReserved
3RESERVEDR-0/W0hReserved
2RESERVEDR-0/W0hReserved
1RESERVEDR-0/W0hReserved
0RESERVEDR-0/W0hReserved

14.11.3.28 GPGTOGGLE Register (Offset = 36h) [Reset = 00000000h]

GPGTOGGLE is shown in Figure 14-171 and described in Table 14-182.

Return to the Summary Table.

GPIO G Data Toggle Register (GPIO192 to 223)

Writing a 1 will toggle GPIO0 output data latch 1 to 0 or 0 to 1.
Writes of 0 are ignored.
Always reads back a 0.

Figure 14-171 GPGTOGGLE Register
3130292827262524
GPIO223GPIO222GPIO221GPIO220GPIO219GPIO218GPIO217GPIO216
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
2322212019181716
GPIO215GPIO214GPIO213GPIO212GPIO211GPIO210GPIO209GPIO208
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
15141312111098
GPIO207GPIO206GPIO205GPIO204GPIO203GPIO202GPIO201GPIO200
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
76543210
GPIO199GPIO198RESERVEDRESERVEDRESERVEDRESERVEDRESERVEDRESERVED
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
Table 14-182 GPGTOGGLE Register Field Descriptions
BitFieldTypeResetDescription
31GPIO223R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

30GPIO222R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

29GPIO221R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

28GPIO220R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

27GPIO219R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

26GPIO218R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

25GPIO217R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

24GPIO216R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

23GPIO215R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

22GPIO214R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

21GPIO213R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

20GPIO212R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

19GPIO211R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

18GPIO210R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

17GPIO209R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

16GPIO208R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

15GPIO207R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

14GPIO206R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

13GPIO205R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

12GPIO204R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

11GPIO203R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

10GPIO202R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

9GPIO201R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

8GPIO200R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

7GPIO199R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

6GPIO198R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

5RESERVEDR-0/W0hReserved
4RESERVEDR-0/W0hReserved
3RESERVEDR-0/W0hReserved
2RESERVEDR-0/W0hReserved
1RESERVEDR-0/W0hReserved
0RESERVEDR-0/W0hReserved

14.11.3.29 GPHDAT Register (Offset = 38h) [Reset = 00000000h]

GPHDAT is shown in Figure 14-172 and described in Table 14-183.

Return to the Summary Table.

GPIO H Data Register (GPIO224 to 255)

Reading this register indicates the current status of the GPIO pin, irrespective of which mode the pin is in. Writing to this register will set the GPIO pin high or low if the pin is enabled for GPIO output mode, otherwise the value written is latched but ignored. The state of the output register latch will remain in its current state until the next write operation. A system reset will clear all bits and latched values to zero.

DESIGNER NOTE:
[1] Reading the GPIODAT register should reflect the state of the PIN (after qualification), not the state of the output latch of the

Figure 14-172 GPHDAT Register
3130292827262524
RESERVEDRESERVEDRESERVEDRESERVEDRESERVEDRESERVEDRESERVEDRESERVED
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
2322212019181716
RESERVEDRESERVEDRESERVEDRESERVEDRESERVEDGPIO242GPIO241GPIO240
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
15141312111098
GPIO239GPIO238GPIO237GPIO236GPIO235GPIO234GPIO233GPIO232
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
76543210
GPIO231GPIO230GPIO229GPIO228GPIO227GPIO226GPIO225GPIO224
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
Table 14-183 GPHDAT Register Field Descriptions
BitFieldTypeResetDescription
31RESERVEDR/W0hReserved
30RESERVEDR/W0hReserved
29RESERVEDR/W0hReserved
28RESERVEDR/W0hReserved
27RESERVEDR/W0hReserved
26RESERVEDR/W0hReserved
25RESERVEDR/W0hReserved
24RESERVEDR/W0hReserved
23RESERVEDR/W0hReserved
22RESERVEDR/W0hReserved
21RESERVEDR/W0hReserved
20RESERVEDR/W0hReserved
19RESERVEDR/W0hReserved
18GPIO242R/W0hReading this register indicates the current status of this GPIO pin, irrespective of which mode the pin is in. Writing to this register will set this GPIO pin high or low if the pin is enabled for GPIO output mode, otherwise the value written is latched but ignored. The state of the output register latch will remain in its current state until the next write operation. A system reset will clear all bits and latched values to zero.

DESIGNER NOTE:
[1] Reading the GPIODAT register should reflect the state of the PIN (after qualification), not the state of the output latch of the GPIODAT register.

Reset type: SYSRSn

17GPIO241R/W0hReading this register indicates the current status of this GPIO pin, irrespective of which mode the pin is in. Writing to this register will set this GPIO pin high or low if the pin is enabled for GPIO output mode, otherwise the value written is latched but ignored. The state of the output register latch will remain in its current state until the next write operation. A system reset will clear all bits and latched values to zero.

DESIGNER NOTE:
[1] Reading the GPIODAT register should reflect the state of the PIN (after qualification), not the state of the output latch of the GPIODAT register.

Reset type: SYSRSn

16GPIO240R/W0hReading this register indicates the current status of this GPIO pin, irrespective of which mode the pin is in. Writing to this register will set this GPIO pin high or low if the pin is enabled for GPIO output mode, otherwise the value written is latched but ignored. The state of the output register latch will remain in its current state until the next write operation. A system reset will clear all bits and latched values to zero.

DESIGNER NOTE:
[1] Reading the GPIODAT register should reflect the state of the PIN (after qualification), not the state of the output latch of the GPIODAT register.

Reset type: SYSRSn

15GPIO239R/W0hReading this register indicates the current status of this GPIO pin, irrespective of which mode the pin is in. Writing to this register will set this GPIO pin high or low if the pin is enabled for GPIO output mode, otherwise the value written is latched but ignored. The state of the output register latch will remain in its current state until the next write operation. A system reset will clear all bits and latched values to zero.

DESIGNER NOTE:
[1] Reading the GPIODAT register should reflect the state of the PIN (after qualification), not the state of the output latch of the GPIODAT register.

Reset type: SYSRSn

14GPIO238R/W0hReading this register indicates the current status of this GPIO pin, irrespective of which mode the pin is in. Writing to this register will set this GPIO pin high or low if the pin is enabled for GPIO output mode, otherwise the value written is latched but ignored. The state of the output register latch will remain in its current state until the next write operation. A system reset will clear all bits and latched values to zero.

DESIGNER NOTE:
[1] Reading the GPIODAT register should reflect the state of the PIN (after qualification), not the state of the output latch of the GPIODAT register.

Reset type: SYSRSn

13GPIO237R/W0hReading this register indicates the current status of this GPIO pin, irrespective of which mode the pin is in. Writing to this register will set this GPIO pin high or low if the pin is enabled for GPIO output mode, otherwise the value written is latched but ignored. The state of the output register latch will remain in its current state until the next write operation. A system reset will clear all bits and latched values to zero.

DESIGNER NOTE:
[1] Reading the GPIODAT register should reflect the state of the PIN (after qualification), not the state of the output latch of the GPIODAT register.

Reset type: SYSRSn

12GPIO236R/W0hReading this register indicates the current status of this GPIO pin, irrespective of which mode the pin is in. Writing to this register will set this GPIO pin high or low if the pin is enabled for GPIO output mode, otherwise the value written is latched but ignored. The state of the output register latch will remain in its current state until the next write operation. A system reset will clear all bits and latched values to zero.

DESIGNER NOTE:
[1] Reading the GPIODAT register should reflect the state of the PIN (after qualification), not the state of the output latch of the GPIODAT register.

Reset type: SYSRSn

11GPIO235R/W0hReading this register indicates the current status of this GPIO pin, irrespective of which mode the pin is in. Writing to this register will set this GPIO pin high or low if the pin is enabled for GPIO output mode, otherwise the value written is latched but ignored. The state of the output register latch will remain in its current state until the next write operation. A system reset will clear all bits and latched values to zero.

DESIGNER NOTE:
[1] Reading the GPIODAT register should reflect the state of the PIN (after qualification), not the state of the output latch of the GPIODAT register.

Reset type: SYSRSn

10GPIO234R/W0hReading this register indicates the current status of this GPIO pin, irrespective of which mode the pin is in. Writing to this register will set this GPIO pin high or low if the pin is enabled for GPIO output mode, otherwise the value written is latched but ignored. The state of the output register latch will remain in its current state until the next write operation. A system reset will clear all bits and latched values to zero.

DESIGNER NOTE:
[1] Reading the GPIODAT register should reflect the state of the PIN (after qualification), not the state of the output latch of the GPIODAT register.

Reset type: SYSRSn

9GPIO233R/W0hReading this register indicates the current status of this GPIO pin, irrespective of which mode the pin is in. Writing to this register will set this GPIO pin high or low if the pin is enabled for GPIO output mode, otherwise the value written is latched but ignored. The state of the output register latch will remain in its current state until the next write operation. A system reset will clear all bits and latched values to zero.

DESIGNER NOTE:
[1] Reading the GPIODAT register should reflect the state of the PIN (after qualification), not the state of the output latch of the GPIODAT register.

Reset type: SYSRSn

8GPIO232R/W0hReading this register indicates the current status of this GPIO pin, irrespective of which mode the pin is in. Writing to this register will set this GPIO pin high or low if the pin is enabled for GPIO output mode, otherwise the value written is latched but ignored. The state of the output register latch will remain in its current state until the next write operation. A system reset will clear all bits and latched values to zero.

DESIGNER NOTE:
[1] Reading the GPIODAT register should reflect the state of the PIN (after qualification), not the state of the output latch of the GPIODAT register.

Reset type: SYSRSn

7GPIO231R/W0hReading this register indicates the current status of this GPIO pin, irrespective of which mode the pin is in. Writing to this register will set this GPIO pin high or low if the pin is enabled for GPIO output mode, otherwise the value written is latched but ignored. The state of the output register latch will remain in its current state until the next write operation. A system reset will clear all bits and latched values to zero.

DESIGNER NOTE:
[1] Reading the GPIODAT register should reflect the state of the PIN (after qualification), not the state of the output latch of the GPIODAT register.

Reset type: SYSRSn

6GPIO230R/W0hReading this register indicates the current status of this GPIO pin, irrespective of which mode the pin is in. Writing to this register will set this GPIO pin high or low if the pin is enabled for GPIO output mode, otherwise the value written is latched but ignored. The state of the output register latch will remain in its current state until the next write operation. A system reset will clear all bits and latched values to zero.

DESIGNER NOTE:
[1] Reading the GPIODAT register should reflect the state of the PIN (after qualification), not the state of the output latch of the GPIODAT register.

Reset type: SYSRSn

5GPIO229R/W0hReading this register indicates the current status of this GPIO pin, irrespective of which mode the pin is in. Writing to this register will set this GPIO pin high or low if the pin is enabled for GPIO output mode, otherwise the value written is latched but ignored. The state of the output register latch will remain in its current state until the next write operation. A system reset will clear all bits and latched values to zero.

DESIGNER NOTE:
[1] Reading the GPIODAT register should reflect the state of the PIN (after qualification), not the state of the output latch of the GPIODAT register.

Reset type: SYSRSn

4GPIO228R/W0hReading this register indicates the current status of this GPIO pin, irrespective of which mode the pin is in. Writing to this register will set this GPIO pin high or low if the pin is enabled for GPIO output mode, otherwise the value written is latched but ignored. The state of the output register latch will remain in its current state until the next write operation. A system reset will clear all bits and latched values to zero.

DESIGNER NOTE:
[1] Reading the GPIODAT register should reflect the state of the PIN (after qualification), not the state of the output latch of the GPIODAT register.

Reset type: SYSRSn

3GPIO227R/W0hReading this register indicates the current status of this GPIO pin, irrespective of which mode the pin is in. Writing to this register will set this GPIO pin high or low if the pin is enabled for GPIO output mode, otherwise the value written is latched but ignored. The state of the output register latch will remain in its current state until the next write operation. A system reset will clear all bits and latched values to zero.

DESIGNER NOTE:
[1] Reading the GPIODAT register should reflect the state of the PIN (after qualification), not the state of the output latch of the GPIODAT register.

Reset type: SYSRSn

2GPIO226R/W0hReading this register indicates the current status of this GPIO pin, irrespective of which mode the pin is in. Writing to this register will set this GPIO pin high or low if the pin is enabled for GPIO output mode, otherwise the value written is latched but ignored. The state of the output register latch will remain in its current state until the next write operation. A system reset will clear all bits and latched values to zero.

DESIGNER NOTE:
[1] Reading the GPIODAT register should reflect the state of the PIN (after qualification), not the state of the output latch of the GPIODAT register.

Reset type: SYSRSn

1GPIO225R/W0hReading this register indicates the current status of this GPIO pin, irrespective of which mode the pin is in. Writing to this register will set this GPIO pin high or low if the pin is enabled for GPIO output mode, otherwise the value written is latched but ignored. The state of the output register latch will remain in its current state until the next write operation. A system reset will clear all bits and latched values to zero.

DESIGNER NOTE:
[1] Reading the GPIODAT register should reflect the state of the PIN (after qualification), not the state of the output latch of the GPIODAT register.

Reset type: SYSRSn

0GPIO224R/W0hReading this register indicates the current status of this GPIO pin, irrespective of which mode the pin is in. Writing to this register will set this GPIO pin high or low if the pin is enabled for GPIO output mode, otherwise the value written is latched but ignored. The state of the output register latch will remain in its current state until the next write operation. A system reset will clear all bits and latched values to zero.

DESIGNER NOTE:
[1] Reading the GPIODAT register should reflect the state of the PIN (after qualification), not the state of the output latch of the GPIODAT register.

Reset type: SYSRSn

14.11.3.30 GPHSET Register (Offset = 3Ah) [Reset = 00000000h]

GPHSET is shown in Figure 14-173 and described in Table 14-184.

Return to the Summary Table.

GPIO H Data Set Register (GPIO224 to 255)

Writing a 1 will force GPIO output data latch to 1.
Writes of 0 are ignored.
Always reads back a 0.

Figure 14-173 GPHSET Register
3130292827262524
RESERVEDRESERVEDRESERVEDRESERVEDRESERVEDRESERVEDRESERVEDRESERVED
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
2322212019181716
RESERVEDRESERVEDRESERVEDRESERVEDRESERVEDGPIO242GPIO241GPIO240
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
15141312111098
GPIO239GPIO238GPIO237GPIO236GPIO235GPIO234GPIO233GPIO232
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
76543210
GPIO231GPIO230GPIO229GPIO228GPIO227GPIO226GPIO225GPIO224
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
Table 14-184 GPHSET Register Field Descriptions
BitFieldTypeResetDescription
31RESERVEDR-0/W0hReserved
30RESERVEDR-0/W0hReserved
29RESERVEDR-0/W0hReserved
28RESERVEDR-0/W0hReserved
27RESERVEDR-0/W0hReserved
26RESERVEDR-0/W0hReserved
25RESERVEDR-0/W0hReserved
24RESERVEDR-0/W0hReserved
23RESERVEDR-0/W0hReserved
22RESERVEDR-0/W0hReserved
21RESERVEDR-0/W0hReserved
20RESERVEDR-0/W0hReserved
19RESERVEDR-0/W0hReserved
18GPIO242R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

17GPIO241R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

16GPIO240R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

15GPIO239R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

14GPIO238R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

13GPIO237R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

12GPIO236R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

11GPIO235R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

10GPIO234R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

9GPIO233R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

8GPIO232R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

7GPIO231R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

6GPIO230R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

5GPIO229R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

4GPIO228R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

3GPIO227R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

2GPIO226R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

1GPIO225R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

0GPIO224R-0/W0hOutput Set bit for this pin

Reset type: SYSRSn

14.11.3.31 GPHCLEAR Register (Offset = 3Ch) [Reset = 00000000h]

GPHCLEAR is shown in Figure 14-174 and described in Table 14-185.

Return to the Summary Table.

GPIO H Data Clear Register (GPIO224 to 255)

Writing a 1 will force GPIO0 output data latch to 0.
Writes of 0 are ignored.
Always reads back a 0.

Figure 14-174 GPHCLEAR Register
3130292827262524
RESERVEDRESERVEDRESERVEDRESERVEDRESERVEDRESERVEDRESERVEDRESERVED
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
2322212019181716
RESERVEDRESERVEDRESERVEDRESERVEDRESERVEDGPIO242GPIO241GPIO240
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
15141312111098
GPIO239GPIO238GPIO237GPIO236GPIO235GPIO234GPIO233GPIO232
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
76543210
GPIO231GPIO230GPIO229GPIO228GPIO227GPIO226GPIO225GPIO224
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
Table 14-185 GPHCLEAR Register Field Descriptions
BitFieldTypeResetDescription
31RESERVEDR-0/W0hReserved
30RESERVEDR-0/W0hReserved
29RESERVEDR-0/W0hReserved
28RESERVEDR-0/W0hReserved
27RESERVEDR-0/W0hReserved
26RESERVEDR-0/W0hReserved
25RESERVEDR-0/W0hReserved
24RESERVEDR-0/W0hReserved
23RESERVEDR-0/W0hReserved
22RESERVEDR-0/W0hReserved
21RESERVEDR-0/W0hReserved
20RESERVEDR-0/W0hReserved
19RESERVEDR-0/W0hReserved
18GPIO242R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

17GPIO241R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

16GPIO240R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

15GPIO239R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

14GPIO238R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

13GPIO237R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

12GPIO236R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

11GPIO235R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

10GPIO234R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

9GPIO233R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

8GPIO232R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

7GPIO231R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

6GPIO230R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

5GPIO229R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

4GPIO228R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

3GPIO227R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

2GPIO226R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

1GPIO225R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

0GPIO224R-0/W0hOutput Clear bit for this pin

Reset type: SYSRSn

14.11.3.32 GPHTOGGLE Register (Offset = 3Eh) [Reset = 00000000h]

GPHTOGGLE is shown in Figure 14-175 and described in Table 14-186.

Return to the Summary Table.

GPIO H Data Toggle Register (GPIO224 to 255)

Writing a 1 will toggle GPIO0 output data latch 1 to 0 or 0 to 1.
Writes of 0 are ignored.
Always reads back a 0.

Figure 14-175 GPHTOGGLE Register
3130292827262524
RESERVEDRESERVEDRESERVEDRESERVEDRESERVEDRESERVEDRESERVEDRESERVED
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
2322212019181716
RESERVEDRESERVEDRESERVEDRESERVEDRESERVEDGPIO242GPIO241GPIO240
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
15141312111098
GPIO239GPIO238GPIO237GPIO236GPIO235GPIO234GPIO233GPIO232
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
76543210
GPIO231GPIO230GPIO229GPIO228GPIO227GPIO226GPIO225GPIO224
R-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0hR-0/W-0h
Table 14-186 GPHTOGGLE Register Field Descriptions
BitFieldTypeResetDescription
31RESERVEDR-0/W0hReserved
30RESERVEDR-0/W0hReserved
29RESERVEDR-0/W0hReserved
28RESERVEDR-0/W0hReserved
27RESERVEDR-0/W0hReserved
26RESERVEDR-0/W0hReserved
25RESERVEDR-0/W0hReserved
24RESERVEDR-0/W0hReserved
23RESERVEDR-0/W0hReserved
22RESERVEDR-0/W0hReserved
21RESERVEDR-0/W0hReserved
20RESERVEDR-0/W0hReserved
19RESERVEDR-0/W0hReserved
18GPIO242R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

17GPIO241R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

16GPIO240R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

15GPIO239R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

14GPIO238R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

13GPIO237R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

12GPIO236R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

11GPIO235R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

10GPIO234R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

9GPIO233R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

8GPIO232R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

7GPIO231R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

6GPIO230R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

5GPIO229R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

4GPIO228R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

3GPIO227R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

2GPIO226R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

1GPIO225R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn

0GPIO224R-0/W0hOutput Toggle Register GPIO pin

Reset type: SYSRSn