SPRUJ42E March 2022 – October 2024 AM2631 , AM2631-Q1 , AM2632 , AM2632-Q1 , AM2634 , AM2634-Q1
PRODUCTION DATA
Segment 1st interval Preload Register.
Return to Summary Table
Instance Name | Physical Address |
---|---|
R5SS0 | 5350 0028h |
R5SS1 | 5351 0028h |
31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 |
NU12 | |||||||
R | |||||||
0h | |||||||
23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 |
NU12 | |||||||
R | |||||||
0h | |||||||
15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 |
NU12 | |||||||
R | |||||||
0h | |||||||
7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
NU12 | SEGID_PLOAD | ||||||
R | R/W | ||||||
0h | 0h |
Bit | Field | Type | Reset | Description |
---|---|---|---|---|
31:2 | NU12 | R | 0h | Reserved bits |
1:0 | SEGID_PLOAD | R/W | 0h | Segment number for which preload is to be started [RWP - Read, Priviledge Mode Write only] This specifies the segment for which the address of its First interval will be pre-loaded into the NSTC ROM address counter. The 1st address of each segment are defined in SEGx_START_ADDR register.The address of the 1st interval of the selected segment is loaded into the NSTC ROM address counter when the RS_CNT_B1 bits of STC_GCR0 are set to 1X 00 = Preload the address of the 1st interval of segment 0. 01 = Preload the address of the 1st interval of segment 1. 10 = Preload the address of the 1st interval of segment 2. 11 = Preload the address of the 1st interval of segment 3. |