SWRA475A January   2015  – October 2016 CC2540 , CC2540T , CC2541 , CC2541-Q1

 

  1.   Bluetooth low energy Beacons
    1.     Trademarks
    2. 1 What is a Beacon?
    3. 2 Bluetooth low energy and Bluetooth Smart
      1. 2.1 Non-Connectable Beacons
      2. 2.2 Connectable Beacons
      3. 2.3 Data Packet
      4. 2.4 Device Address
        1. 2.4.1 Flags
        2. 2.4.2 Manufacturer Specific Data
      5. 2.5 Broadcast Interval
      6. 2.6 Power
      7. 2.7 Range
      8. 2.8 Coexistence
    4. 3 Designing a Bluetooth low energy Beacon
      1. 3.1 Development Kits
      2. 3.2 Creating a Beacon Application With TI Bluetooth low energy-Stack
    5. 4 iBeacon Implementation
      1. 4.1 Overview and Prerequisites
      2. 4.2 Design and Implementation
      3. 4.3 Testing
    6. 5 Proprietary Implementation
      1. 5.1 Overview and Prerequisites
      2. 5.2 Design and Implementation
      3. 5.3 Testing
    7. 6 References
  2.   Revision History

4.3 Testing

The TI Packet Sniffer was used to test the device. Figure 11 shows an advertising packet as it was discovered by the sniffer. It can be seen that the advertising data reflects the requirements of the iBeacon specifications, as does the advertising PDU type.

packet_sniffer.pngFigure 11. Sniffer Packet Showing the Advertising Data of the Beacon Device