SWRZ062F September 2015 – December 2022 CC1310
Late Time-out of Receiver Operation in Sniff Mode
A and B
The receive sniff mode commands might run the receiver longer than specified for certain settings, leading to increased average current consumption.
When running CMD_PROP_RX_SNIFF or CMD_PROP_RX_ADV_SNIFF, and the following conditions are met:
then the carrier sense operation will always end, regardless of csConf.busyOp.
After this, the receiver will run until a packet is received or the command times out due to endTrigger.
Use SIMPLELINK-CC13X0-SDK_2.20.00.38 or later.