Revision(s) Affected:

AWR6843AOP ES2.0

Description:

The BUSY flag in the DMMGLBCTRL register should be set when the DMM starts receiving a packet or has data in its internal buffers. However, the BUSY flag (DMMGLBCTRL.24) may not get set when the DMM starts receiving a packet under the following condition:

• The BUSY bit is set only after the packet has been received, de-serialized, and written to the internal buffers. It stays active while data is still in the DMM internal buffers. If the internal buffers are empty (meaning that no data needs to be written to the destination memory) then, the BUSY bit will be cleared.

Workaround(s):

Wait for a number of DMMCLK cycles (for example, 95 DMMCLK cycles) beyond the longest reception and deserialization time needed for a given packet size and DMM port configuration, before checking the status of the BUSY flag, and after the DMM ON/OFF bit field (DMMGLBCTRL.[3:0]) has been programmed to OFF.