Revision History
Changes from December 1, 2022 to March 15, 2024 (from Revision * (December 2022) to Revision A (March 2024))
-
Device Markings: Updated device markings image to reflect for
xWRL6432 ES2.0 silicon markingsGo
-
Device Markings: Safety Level and Security Grade
updatedGo
-
Advisory to Silicon Variant / Revision Map: Updated ES1.0 and ES2.0 status
for advisories;Go
-
Advisory to Silicon Variant / Revision Map: Added DIG #14
advisoryGo
-
Reduction in supported RF frequency range: Frequency range updated for ES2.0 Go
-
Analog temperature sensor: Not usable at high temperatures: Issue fixed in
ES2.0Go
-
GPADC based external signal monitor is not supported: Issue fixed in
ES2.0Go
-
Slicer LDO Test LOAD (TLOAD) not disabled after startup: Issue fixed in
ES2.0Go
-
UART: UARTA cannot be used to wake up the sequencer from Deep Sleep Low Power
Mode: Issue fixed in ES2.0Go
-
CRC: CRC 8-bit data width and CRC8-SAE-J1850 and CRC8-H2F possible use in CAN
module is not supported: Details and workaround rephrased.Go
-
APPSS Cortex-M4 doesn't get the correct error response when cluster 3 retention
memories are accessed in low-power deep-sleep
powered down state: Issue fixed in
ES2.0Go
-
Incorrect behavior of frame stop API: Title of errata
updatedGo
-
Incorrect behavior of frame stop
API: Details updatedGo
-
Incorrect behavior of frame stop
API: Workarounds updatedGo
-
Corrupted Data Store for Partial Write in Shared Memory:
Added a new Advisory “Shared memory: Corrupted Data Store for Partial Write in
Shared Memory"Go
-
Boot failure, if metaimage is multiple of 2K: Added a new
Advisory “Boot failure, if metaimage is multiple of 2K"Go
-
Boot failure for images less than size 8k over SPI: Added a
new Advisory “Boot failure for images less than size 8k over
SPI"Go