TIDT352 October   2023

 

  1.   1
  2.   Description
  3.   Features
  4.   Applications
  5. 1Test Prerequisites
    1. 1.1 Voltage and Current Requirements
    2. 1.2 Required Equipment
    3. 1.3 Considerations
    4. 1.4 Dimensions
    5. 1.5 Test Setup
  6. 2Testing and Results
    1. 2.1 Efficiency Graphs
    2. 2.2 Efficiency Data
    3. 2.3 Thermal Images
    4. 2.4 Bode Plots
  7. 3Waveforms
    1. 3.1 Switching
    2. 3.2 Load Transients
    3. 3.3 Start-Up and Shutdown Sequences

Voltage and Current Requirements

Table 1-1 Voltage and Current Requirements
ParameterSpecifications
Input Power24-V to 60-V steady-state
Use J2 onboard (Phoenix Contact 1714971 Receptacle, 9.52 mm, 2 × 1, TH)
5-V outputLoad up to 60 A
Use J3 terminal block Eaton EM292902
Various signals: J4Connect a conductor (jumper) from the J4 pin 7 (DEMB) to pin 6 (VDDA) for two-phase operation