DLPU018J October 2014 – June 2024 DLPC900
This command loads an image from flash memory and then displays it on the DMD. After executing this command, the host may poll the system status using I2C commands: 0x20, 0x21, and 0x22, or using the respective USB commands: 0x1A0A, 0x1A0B, and 0x1A0C.
I2C | USB | |
---|---|---|
Read | Write | 0x1A39 |
0x7F | 0xFF |
BYTE | BITS | DESCRIPTION | RESET | TYPE | ||||
---|---|---|---|---|---|---|---|---|
0 | 7:0 | Image Index. Loads the image at this index. Reading this back provides the index that was loaded most recently through this command. | d0 | wr |