SBAA288A July   2018  – January 2019 ADS7142

 

  1.   TM4C1294 interface to ADS7142 software library
    1.     Trademarks
    2. 1 Introduction
    3. 2 Hardware
    4. 3 Software
      1. 3.1 Header Files
      2. 3.2 ADS7142 Device Functional Modes Overview
      3. 3.3 Software Functions
    5. 4 Using the Software
      1. 4.1 Prerequisites
      2. 4.2 Getting Started
      3. 4.3 Using the Library
    6. 5 Main Routines and Test Data
      1. 5.1 Manual Mode
      2. 5.2 Autonomous Mode With Pre-Alert
      3. 5.3 Autonomous Mode With Post-Alert
      4. 5.4 Autonomous Mode With Start Burst Data
      5. 5.5 Autonomous Mode With Stop Burst Data
      6. 5.6 High Precision Mode
    7. 6 References
  2.   Revision History

4.1 Prerequisites

To successfully compile the project, download and run the software described in this document, the following hardware and software is required:

• ARM Cortex-M4F-based MCU TM4C1294 connected LaunchPad™ evaluation kit

• ADS7142 nanopower, dual-channel, programmable sensor monitor BoosterPack™ plug-in module

• Code composer studio (CCS) integrated development environment (IDE) (version 7.4.0.00015)

• TivaWare (version 2.1.4.178)