SBAA525A september   2021  – may 2023 AFE7900 , AFE7920 , AFE7950

 

  1.   1
  2.   Abstract
  3.   Trademarks
  4. 1Introduction
    1. 1.1 Highlighted Products
    2. 1.2 Device Loopback Modes
      1. 1.2.1 ADC to DAC JESD Loopback
      2. 1.2.2 ADC to DAC Low Latency Loopback
  5. 2Tests and Results
    1. 2.1 Test Methodology
      1. 2.1.1 Hardware Setup
        1. 2.1.1.1 ADC to DAC JESD Loopback
        2. 2.1.1.2 ADC to DAC Low Latency Loopback
      2. 2.1.2 GUI Setup
        1. 2.1.2.1 ADC to DAC JESD Loopback
        2. 2.1.2.2 ADC to DAC Low Latency Loopback
      3. 2.1.3 Test Conditions
      4. 2.1.4 Test Results
        1. 2.1.4.1 ADC to DAC JESD Loopback
          1. 2.1.4.1.1 JESD 122.88 MSPS
          2. 2.1.4.1.2 JESD 184.32 MSPS
          3. 2.1.4.1.3 JESD 245.76 MSPS
          4. 2.1.4.1.4 JESD 368.64 MSPS
          5. 2.1.4.1.5 JESD 491.52 MSPS
        2. 2.1.4.2 ADC to DAC Low Latency Loopback
  6. 3Conclusion
  7. 4References
  8. 5Revision History

Highlighted Products

The AFE79xx is a family of high performance, wide bandwidth multi-channel transceivers, integrating four RF sampling transmitter chains, four RF sampling receiver chains, and up to two RF sampling digitizing auxiliary chains (feedback paths). The high dynamic range of the transmitter and receiver chains allows the device to generate and receive 3G, 4G, and 5G signals from wireless base stations, while the wide bandwidth capability of the AFE79xx devices is designed for multi-band 4G and 5G base stations. Each receiver chain includes a 25-dB range DSA (Digital Step Attenuator), followed by a 3-GSPS ADC (analog to-digital converter). The single or dual digital down converters (DDC) provide up to 600 MHz of combined signal BW. In TDD mode, the receiver channel can be configured to dynamically switch between the traffic receiver (TDD RX) and wideband feedback receiver (TDD FB), with the capability of re-using the same analog input for both purposes. Each transmitter chain includes a single or dual digital up converters (DUCs) supporting up to 1200-MHz combined signal bandwidth.