The AMC1336 is a precision, delta-sigma (ΔΣ) modulator with the output separated from the input circuitry by a capacitive double isolation barrier that is highly resistant to magnetic interference. This barrier is certified to provide reinforced isolation of up to 8000 VPEAK according to the DIN VDE V 0884-11 and UL1577 standards. Used in conjunction with isolated power supplies, this isolated modulator separates parts of the system that operate on different common-mode voltage levels and protects lower-voltage parts from damage.
The unique wide, bipolar. ±1-V input voltage range of the AMC1336 and its high input resistance support direct connection of the device to resistive dividers in high-voltage applications. When used with a digital filter (for instance, as integrated in the TMS320F28004x, TMS320F2807x or TMS320F2837x microcontroller families) to decimate the output bitstream, the device can achieve 16 bits of resolution with a dynamic range of 87 dB at a data rate of 82 kSPS.
On the high-side, the AMC1336 is supplied by a
3.3-V or 5-V power supply. The isolated digital interface operates from a 3.0-V, 3.3-V or 5-V power supply.
The AMC1336 performance is specified over the extended industrial temperature range of –40°C to +125°C.
PART NUMBER | PACKAGE | BODY SIZE (NOM) |
---|---|---|
AMC1336 | SOIC (8) | 5.85 mm × 7.50 mm |
Changes from A Revision (December 2019) to B Revision
Changes from * Revision (August 2019) to A Revision
PIN | I/O | DESCRIPTION | |
---|---|---|---|
NO. | NAME | ||
1 | AVDD | — | Analog (high-side) power supply, 3.0 V to 5.5 V.
See the Power Supply Recommendations section for decoupling recommendations. |
2 | AINP | I | Noninverting analog input |
3 | AINN | I | Inverting analog input |
4 | AGND | — | Analog (high-side) ground reference |
5 | DGND | — | Digital (controller-side) ground reference |
6 | DOUT | O | Modulator bitstream output, updated with the rising edge of the clock signal present on CLKIN. Use the rising edge of the clock to latch the modulator bitstream at the input of the digital filter device. |
7 | CLKIN | I | Modulator clock input with internal pulldown resistor (typical value: 1 MΩ). The clock signal must be applied continuously for proper device operation; see the Clock Input section for additional details. |
8 | DVDD | — | Digital (controller-side) power supply, 2.7 V to 5.5 V.
See the Power Supply Recommendations section for decoupling recommendations. |
MIN | MAX | UNIT | |||
---|---|---|---|---|---|
Power-supply voltage | AVDD to AGND | –0.3 | 6.5 | V | |
DVDD to DGND | –0.3 | 6.5 | |||
Analog input voltage | On the AINP and AINN pins | AGND – 5 | AVDD + 0.5 | V | |
Digital input voltage | On the CLKIN pin | DGND – 0.5 | DVDD + 0.5 | V | |
Digital output voltage | On the DOUT pin | DGND – 0.5 | DVDD + 0.5 | V | |
Input current | Continuous, any pin except power-supply pins | –10 | 10 | mA | |
Temperature | Junction, TJ | 150 | °C | ||
Storage, Tstg | –65 | 150 |
VALUE | UNIT | |||
---|---|---|---|---|
V(ESD) | Electrostatic discharge | Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001(1) | ±2000 | V |
Charged-device model (CDM), per JEDEC specification JESD22-C101(2) | ±1000 |