SBAU388C September   2021  – February 2024 TMAG5170 , TMAG5170-Q1

 

  1.   1
  2.   TMAG5170 Evaluation Module Abstract
  3. 1Trademarks
  4. 2Overview
    1. 2.1 Kit Contents
    2. 2.2 Related Documentation From Texas Instruments
  5. 3Hardware
    1. 3.1 Features
  6. 4Operation
    1. 4.1 Quick Start Setup
    2. 4.2 EVM Operation
      1. 4.2.1 Setup
        1. 4.2.1.1 Driver Installation
        2. 4.2.1.2 Firmware
          1. 4.2.1.2.1 Firmware Debug
        3. 4.2.1.3 GUI Setup and Usage
          1. 4.2.1.3.1 Initial Setup
          2. 4.2.1.3.2 GUI Operation
      2. 4.2.2 Rotate and Push Demo
      3. 4.2.3 Direct EVM Serial Communication
  7. 5Schematics, PCB Layout, and Bill of Materials
    1. 5.1 Schematics
    2. 5.2 PCB Layout
    3. 5.3 Bill of Materials
  8. 6Revision History

4.2 EVM Operation

To use the EVM with the included TI-SCB Controller, connect the EVM as shown in Figure 4-1.

GUID-20210813-SS0I-X1J9-NMLC-XFG75DCKQT6R-low.svg Figure 4-1 EVM on TI-SCB Controller

It is optional to snap apart the TMAG5170UEVM to separate the TMAG5170A1 and TMAG5170A2 halves. This may be done by flexing the PCB at the indicated boundary below

GUID-20210813-SS0I-LDPK-WC2P-GLBGSGMFCXMQ-low.svg Figure 4-2 TMAG5170UEVM Snap Apart Edge