SBOK063 October   2022 SN54SLC8T245-SEP

 

  1.   Abstract
  2.   Trademarks
  3. 1Texas Instruments Enhanced Product Qualification and Reliability Report
  4. 2Space Enhanced Plastic Production Flow
    1. 2.1 Device Introduction
    2. 2.2 SN54SLC8T245-SEP Production Flow Chart
  5. 3Device Qualification
    1. 3.1 Qualification by Similarity (Qualification Family)
  6. 4Outgas Test Report

4 Outgas Test Report

Outgassing test was performed on 5 units. A total mass loss (TML) of 1.00% and collected volatile condensable material (CVCM) of 0.10% were used as screening levels for rejection of spacecraft materials. The outgas test was performed in a vacuum environment of less than 5 × 10 –5 torr according to ASTM E 595, for a duration of 24 hours, at 125°C. The TML, CVCM, and the amount of Water Vapor Recovered (WVR) were measured after the test.

Table 4-1 Outgas Test Results
SAMPLETML
< 1.0%		CVCM
< 0.1%
SN54SLC8T245PWTSEPPASSPASS