SBOU180B november   2016  – july 2023 INA260

 

  1.   1
  2.   INA260EVM-PDK and Software Tutorial
  3.   Trademarks
  4. 1Overview
    1. 1.1 INA260EVM-PDK Contents
    2. 1.2 INA260EVM-PDK Features
    3. 1.3 Related Documentation from Texas Instruments
  5. 2INA260EVM-PDK Hardware
    1. 2.1 SM-USB-DIG Platform Description
    2. 2.2 INA260EVM PCB Description
      1. 2.2.1 EVM Power Supply
      2. 2.2.2 EVM Analog Inputs
    3. 2.3 EVM Digital Inputs and Outputs
  6. 3INA260EVM-PDK (Rev A) Setup
    1. 3.1 One-Time GUI Software Installation
    2. 3.2 INA260EVM Jumper Settings
    3. 3.3 Connecting the Hardware
    4. 3.4 System Power-Up
  7. 4INA260EVM GUI Software
    1. 4.1 Configuration Tool
      1. 4.1.1 Step 1: Set the I2C Address
      2. 4.1.2 Step 2: Configure Operation
      3. 4.1.3 Step 3: Set Conversion Times
      4. 4.1.4 Step 4: Configure Alert
    2. 4.2 Results Bar
    3. 4.3 Graph Tool
    4. 4.4 Registers Tool
  8. 5INA260EVM Documentation
    1. 5.1 Schematic
    2. 5.2 PCB Layout
    3. 5.3 Bill of Materials
  9. 6Revision History

1.1 INA260EVM-PDK Contents

Table 1-1 summarizes the contents of the INA260EVM kit. Figure 1-1 shows all included hardware. Contact the Texas Instruments customer support center if any component is missing.

Note:

This EVM kit requires the INA260EVM GUI software, which is available for download through the INA260 design & development folder. TI recommends users check the INA260 product folder on the TI website at www.ti.com to verify that they have the latest versions of the related software.

Table 1-1 INA260EVM Kit Contents

ITEM

QUANTITY
INA260EVM PCB test board 1
SM-USB-DIG platform PCB 1
USB extender cable 1
GUID-B57A9032-7E9D-459D-856E-46A6EC0BBB07-low.gif Figure 1-1 Hardware Included with the INA260EVM Kit