The
TMUXBQB-DYYEVM has the following features:
- 2 power supply decoupling capacitors from VDD to
GND (1 × 1 µF; 1 × 0.1 µF)
- 1 protection diode pad from VDD to GND available near power supply (6.9 mm × 5.8 mm)
- 2 power supply decoupling capacitors from VSS to
GND (1 × 1 µF; 1 × 0.1 µF)
- 1 protection diode pad from VSS to GND available near power supply (6.9 mm × 5.8 mm)
- Terminal block power supply connection
- DUT footprint compatible with 16-pin PW (TSSOP), WQFN (BQB), and SOT-23 THIN (DYY) packages
- 16 length-matched signal inputs corresponding to the 24 pins of the DUT
- Selectable connections to VDD, VSS, or GND for each signal input using 2.54 mm shunt
- Footprints for pull-up and pull-down resistors
for each signal input (2 × 0603 footprint on each of 16 signals)
- Footprints for series resistors for each signal input (2 × 0805 footprint on each of 16 signals)
- Footprints for decoupling capacitors for each input (1 × 1206 footprint and 1 × 1812 footprint on each of 16 signals)
- 2 test points for each signal input
- Multiple GND test point connections around board