SCLS975A October   2023  – April 2024 SN74LVC2G100-Q1

PRODUCTION DATA  

  1.   1
  2. 1 Features
  3. 2 Applications
  4. 3 Description
  5. 4 Pin Configuration and Functions
  6. 5 Specifications
    1. 5.1 Absolute Maximum Ratings
    2. 5.2 ESD Ratings
    3. 5.3 Recommended Operating Conditions
    4. 5.4 Thermal Information
    5. 5.5 Electrical Characteristics
    6. 5.6 Switching Characteristics
    7. 5.7 Timing Characteristics
    8. 5.8 Noise Characteristics
    9. 5.9 Typical Characteristics
  7. 6 Parameter Measurement Information
  8. 7 Detailed Description
    1. 7.1 Overview
    2. 7.2 Functional Block Diagram
    3. 7.3 Feature Description
      1. 7.3.1 CMOS Schmitt-Trigger Inputs
      2. 7.3.2 Balanced CMOS Push-Pull Outputs
      3. 7.3.3 Clamp Diode Structure
      4. 7.3.4 Wettable Flanks
    4. 7.4 Device Functional Modes
    5. 7.5 Combinatorial Logic Configurations
  9. 8 Application and Implementation
    1. 8.1 Application Information
    2. 8.2 Typical Application
      1. 8.2.1 Design Requirements
        1. 8.2.1.1 Power Considerations
        2. 8.2.1.2 Input Considerations
        3. 8.2.1.3 Output Considerations
      2. 8.2.2 Detailed Design Procedure
      3. 8.2.3 Application Curves
    3. 8.3 Power Supply Recommendations
    4. 8.4 Layout
      1. 8.4.1 Layout Guidelines
      2. 8.4.2 Layout Example
  10. 9 Device and Documentation Support
    1. 9.1 Documentation Support
      1. 9.1.1 Related Documentation
    2. 9.2 Receiving Notification of Documentation Updates
    3. 9.3 Support Resources
    4. 9.4 Trademarks
    5. 9.5 Electrostatic Discharge Caution
    6. 9.6 Glossary
  11. 10Revision History
  12. 11Mechanical, Packaging, and Orderable Information

5.5 Electrical Characteristics

over operating free-air temperature range (unless otherwise noted)
PARAMETER TEST CONDITIONS VCC -40°C to 125°C UNIT
MIN TYP MAX
VT+ Positive-going input threshold voltage 1.1V 0.5 0.8 V
VT+ Positive-going input threshold voltage 1.5V 0.7 1.11 V
VT+ Positive-going input threshold voltage 1.65 V 0.4 1.3 V
VT+ Positive-going input threshold voltage 1.95 V 0.6 1.5 V
VT+ Positive-going input threshold voltage 2.3V 0.8 1.7 V
VT+ Positive-going input threshold voltage 2.5V 0.8 1.7 V
VT+ Positive-going input threshold voltage 2.7V 0.8 2 V
VT+ Positive-going input threshold voltage 3V 0.9 2 V
VT+ Positive-going input threshold voltage 3.6V 1.1 2 V
VT- Negative-going input threshold voltage 1.1V 0.2 0.6 V
VT- Negative-going input threshold voltage 1.5V 0.34 0.75 V
VT- Negative-going input threshold voltage 1.65 V 0.2 0.9 V
VT- Negative-going input threshold voltage 1.95 V 0.3 1 V
VT- Negative-going input threshold voltage 2.3V 0.4 1.2 V
VT- Negative-going input threshold voltage 2.5V 0.4 1.2 V
VT- Negative-going input threshold voltage 2.7V 0.4 1.4 V
VT- Negative-going input threshold voltage 3V 0.6 1.5 V
VT- Negative-going input threshold voltage 3.6V 0.8 1.7 V
ΔVT Hysteresis (VT+ − VT−) 1.1V 0.07 0.53 V
ΔVT Hysteresis (VT+ − VT−) 1.5V 0.18 0.60 V
ΔVT Hysteresis (VT+ − VT−) 1.65 V 0.1 1.2 V
ΔVT Hysteresis (VT+ − VT−) 1.95 V 0.2 1.3 V
ΔVT Hysteresis (VT+ − VT−) 2.3V 0.3 1.3 V
ΔVT Hysteresis (VT+ − VT−) 2.5V 0.3 1.3 V
ΔVT Hysteresis (VT+ − VT−) 2.7V 0.3 1.1 V
ΔVT Hysteresis (VT+ − VT−) 3V 0.3 1.2 V
ΔVT Hysteresis (VT+ − VT−) 3.6V 0.3 1.2 V
VOH IOH= –100μA 1.1V to 3.6V VCC - 0.2 V
VOH IOH= –4mA 1.65 V 1.2 V
VOH IOH= –8mA 2.3V 1.75 V
VOH IOH= –12mA 2.7V 2.2 V
VOH 3V 2.4 V
VOH IOH= –24mA 3V 2.2 V
VOL IOH= 100μA 1.1V to 3.6V 0.1 0.2 V
VOL IOH= 4mA 1.65 V 0.24 0.45 V
VOL IOH= 8mA 2.3V 0.3 0.7 V
VOL IOH= 12mA 2.7V 0.2 0.4 V
VOL IOH= 24mA 3V 0.55 V
II VI = VCC or GND 3.6V ±1 ±5 µA
Ioff VI or VO = VCC 0V ±1 ±10 µA
ICC VI = VCC or GND, IO = 0 3.6V 1 40 µA
ΔICC One input at VCC - 0.6V, other inputs at VCC or GND 2.7V to 3.6V 500 5000 µA
CI VI = VCC or GND 3.3V 5.39 pF
CO VO = VCC or GND 3.3V 6.3 pF
CPD f = 10MHz 1.8V 12 pF
CPD f = 10MHz 2.5V 15 pF
CPD f = 10MHz 3.3V 17 pF