SFFS422 May   2022

 

  1.   Trademarks
  2.   2
  3. 1Scope
  4. 2Related Documents
  5. 3Related Standards and Acronyms
  6. 4Concept Overview
    1. 4.1 System Block Diagram
    2. 4.2 System Specifications
    3. 4.3 Conditions of use: Assumptions
      1. 4.3.1 Generic Assumptions
      2. 4.3.2 Specific Assumptions
    4. 4.4 Safe Torque Off Implementation
      1. 4.4.1 Subsystem Elements
      2. 4.4.2 STO Safe Subsystem States and Timing Diagram
      3. 4.4.3 STO_1 Subsystem
      4. 4.4.4 STO_2 Subsystem
      5. 4.4.5 MCU (SIL 1) Diagnostic Coverage
      6. 4.4.6 STO_FB Subsystem
      7. 4.4.7 Information on ICs
        1. 4.4.7.1 Isolated 24-V Input Receiver
        2. 4.4.7.2 Load Switch: TPS22919
        3. 4.4.7.3 High-Side Switch: TPS27S100
        4. 4.4.7.4 Isolated Gate Driver: ISO5852S (ISO5452)
    5. 4.5 Safe State
  7. 5Concept FMEA
    1. 5.1 System FMEA
  8. 6References

6 References

See Section 2 for a list of related documentation.

The following materials are offered for additional reference:

  1. Texas Instruments, TIOS1013 and TIOS1015 Functional Safety FIT Rate, FMD and Pin FMA Application Note
  2. Texas Instruments, ISO7710/ISO7710-Q1 Functional Safety FIT Rate, FMD and Pin FMA Application Note
  3. Texas Instruments, ISO5x Functional Safety FIT Rate, FMD and Pin FMA Application Note, not currently released
  4. Texas Instruments, TPS22919-Q1 Functional Safety, FIT Rate, Failure Mode Distribution and Pin FMA Functional Safety Information, not currently released