SLAA475A October   2010  – March 2019 MSP430L092

 

  1.   MSP430x09x Analog Pool: Feature Set and Advanced Use
    1.     Trademarks
    2. 1 MSP430x09x Overview
    3. 2 Analog Pool (A-Pool)
      1. 2.1  Input Dividers
      2. 2.2  Internal Reference
      3. 2.3  Starting and Stopping the A-Pool
      4. 2.4  Comparator Function
      5. 2.5  8-Bit DAC Function
      6. 2.6  8-Bit ADC Function
        1. 2.6.1 ADC Conversion Using Ramp
          1. 2.6.1.1 ADC Conversion Without Error Compensation
          2. 2.6.1.2 ADC Conversions With Overdrive Compensation
          3. 2.6.1.3 ADC Conversions With Offset Compensation
          4. 2.6.1.4 ADC Conversions With Overall Compensation
          5. 2.6.1.5 Windowed ADC Conversion
        2. 2.6.2 ADC Conversion Using SAR
        3. 2.6.3 Multiple ADC Conversions
        4. 2.6.4 Comparison Between Different Measurement Methods
        5. 2.6.5 Error Dependencies
      7. 2.7  SVM Function
      8. 2.8  Use of Multiple Features
      9. 2.9  Temperature Measurements With the A-Pool
      10. 2.10 Fractional and Integer Number Use
      11. 2.11 APINTB and APFRACTB Use With ATBU and EOCBU
      12. 2.12 A-Pool Trigger Sources
      13. 2.13 Filtering ADC Conversions With Digital Filters
    4. 3 Summary
    5. 4 References
  2.   Revision History

2.6.5 Error Dependencies

The errors themselves have different dependencies, such as the reference voltage or the A-Pool clock.

The overdrive error is dependent on the A-Pool clock frequency. A high frequency increases the possibility that an overdrive error occurs. With the highest clock frequency, the maximum error is 1 voltage step.

The internal reference is refreshed on a regular time base. Between the refresh cycles, the reference can have a slight drift, which can have an impact on the measurement. The update frequency of the reference is selected to meet the specification limits shown in the data sheet.

Depending on the input divider for the signal, the resolution of the signal is limited. The accuracy changes with divider settings. Table 3 shows these dependencies.

Table 3. Dependencies of Divider-to-Signal Accuracy

Divider Setting Maximum Accuracy of Input Signal
1 1 mV
2 2 mV
4 4 mV