SLAA954 August   2020  – MONTH  TAS2563

 

  1.   Abstract
  2.   Trademarks
  3. 1End System Integration
    1. 1.1 Step 1: Exporting Binary and Configuration Files
    2. 1.2 Step 2: Configuration Selection
    3. 1.3 Step 3: Snapshot Selection
  4. 2Factory Test and Calibration (FTC)
    1. 2.1 Step 4: Pass/Fail Limits
    2. 2.2 Step 5: Configuration Summary
  5. 3Device Driver Integration
    1. 3.1 Case 1 : Initialization
    2. 3.2 Case 2: Power up
    3. 3.3 Case 3: New Configuration
    4. 3.4 Case 4: New Configuration and PLL
    5. 3.5 Case 5: New Configuration and Program
  6. 4Summary

1 End System Integration

Binary and FTCFG files are the necessary files required by the driver for end system integration. These files contain all of the tuning, speaker characteristic data, and register data. To follow the implementation flowchart, binary and CFG files dumping should only be done after characterization, device configuration, and tuning. End system integration process can be accessed by selecting the “End System Integration” in the Device Home page.

GUID-20200721-CA0I-TFB7-V50R-FR9PXBDXJSX4-low.pngFigure 1-1 Device Home.