SLAAEM1 June   2024 MSPM0C1104 , MSPM0C1104 , MSPM0L1105 , MSPM0L1105

 

  1.   1
  2.   Abstract
  3.   Trademarks
  4. 1Introduction
  5. 2System Architecture Introduction
  6. 3Hardware Design Introduction
    1. 3.1 Power Supply Circuit
    2. 3.2 Drive Circuit
    3. 3.3 Sampling Circuit
    4. 3.4 Main Controller Circuit
    5. 3.5 Control System Introduction
      1. 3.5.1 Drive Method
      2. 3.5.2 Control Method
  7. 4Software Design Introduction
    1. 4.1 Parameters Initialization
    2. 4.2 Direction Setup
    3. 4.3 Timer Interrupt
    4. 4.4 Closed Loop Controller
  8. 5Evaluation

3.3 Sampling Circuit

The sampling circuit is mainly divided into speed sampling and current sampling. Speed sampling is realized by an encoder, which can send square signal containing speed information to the MCU. As for current feedback circuit, the current is converted to voltage through the sensing resistor. Then through the amplifier circuit, the voltage is amplified to within the sampling range of the analog-to-digital converter (ADC).

Sampling Circuit Figure 3-4 Sampling Circuit