SLAU278AH May 2009 – March 2021
Position | Ref Des | No. per Board | Description | Digi-Key Part No. | Comment |
---|---|---|---|---|---|
1 | C1, C2 | 0 | 12pF, SMD0805 | DNP | |
2 | C5 | 1 | 2.2nF, SMD0805 | ||
3 | C3, C7 | 2 | 10uF, 10V, SMD0805 | ||
4 | C4, C6, C8 | 3 | 100nF, SMD0805 | 478-3351-2-ND | |
5 | D1 | 1 | green LED, SMD0805 | P516TR-ND | |
6 | J1, J2 | 0 | 12-pin header, TH | SAM1029-07-ND SAM1213-07-ND | DNP: Headers and receptacles enclosed with kit. Keep vias free of solder. (Header and Receptacle) |
7 | J5, JP1, JP4, JP5, JP6, JP7, JP8, JP9 | 8 | 3-pin header, male, TH | SAM1035-03-ND | Place jumper on 1-2 of JP4-JP9 Place on 1-2 on JP1 |
8 | JP2, JP3 | 2 | 2-pin header, male, TH | SAM1035-02-ND | Place jumper on header |
9 | 9 | Jumper | 15-38-1024-ND | see Pos 7 and 8 | |
10 | JTAG | 1 | 14-pin connector, male, TH | HRP14H-ND | |
11 | Q1 | 0 | Crystal | DNP: keep vias free of solder | |
12 | R1, R7 | 2 | 330 Ω, SMD0805 | 541-330ATR-ND | |
13 | R5, R6, R8, R9, | 2 | 0 Ohm, SMD0805 | 541-000ATR-ND | DNP R5, R6 |
14 | R4 | 1 | 47k Ohm, SMD0805 | 541-47000ATR-ND | |
15 | U1 | 1 | Socket: OTS 24(28)-065-02-00 | Manuf.: Enplas | |
16 | PCB | 1 | 68.5 x 61 mm | 2 layers | |
17 | Adhesive plastic feet | 4 | Approximately 6mm width, 2mm height | for example, 3M Bumpons Part No. SJ-5302 | Apply to corners at bottom side |
18 | MSP430 | 2 | MSP430AFE2xx | DNP: enclosed with kit, supplied by TI |