SLAU278AH May 2009 – March 2021
Pos. | Ref Des | No. Per Board | Description | Digi-Key Part No. | Comment |
---|---|---|---|---|---|
1 | C1, C2 | 0 | 12pF, SMD0805 | DNP | |
1b | C3, C4 | 47pF, SMD0805 | DNP: Only recommendation. Check your crystal spec. | ||
2 | C6, C7 | 2 | 10uF, 10V, Tantal Size B | 511-1463-2-ND | |
3 | C5, C10, C11, C12, C13, C14 | 4 | 100nF, SMD0805 | 311-1245-2-ND | DNP: C12, C14 |
4 | C8 | 0 | 2.2nF, SMD0805 | DNP | |
5 | C9 | 1 | 470nF, SMD0805 | 478-1403-2-ND | |
6 | D1 | 1 | green LED, SMD0805 | 67-1553-1-ND | |
7 | J1, J2, J3, J4 | 0 | 25-pin header, TH | DNP: headers and receptacles enclosed with kit. Keep vias free of solder. | |
SAM1029-25-ND | : Header | ||||
SAM1213-25-ND | : Receptacle | ||||
8 | J5 | 1 | 3-pin header, male, TH | SAM1035-03-ND | |
9 | JP5, JP6, JP7, JP8, JP9, JP10 | 6 | 3-pin header, male, TH | SAM1035-03-ND | Place jumpers on pins 2-3 |
10 | JP1, JP2 | 2 | 2-pin header, male, TH | SAM1035-02-ND | Place jumper on header |
11 | JP3 | 1 | 3-pin header, male, TH | SAM1035-03-ND | Place jumper on pins 1-2 |
12 | 9 | Jumper | 15-38-1024-ND | Place on JP1, JP2, JP3, JP5, JP6, JP7, JP8, JP9, JP10 | |
13 | JTAG | 1 | 14-pin connector, male, TH | HRP14H-ND | |
14 | BOOTST | 0 | 10-pin connector, male, TH | DNP: Keep vias free of solder | |
15 | Q1, Q2 | 0 | Crystal | Q1: Micro Crystal MS1V-T1K 32.768kHz, C(Load) = 12.5pF | DNP: Keep vias free of solder |
16 | R3, R7 | 2 | 330 Ω, SMD0805 | 541-330ATR-ND | |
17 | R1, R2, R4, R6, R8, R9, R10, R11, R12 | 3 | 0 Ω, SMD0805 | 541-000ATR-ND | DNP: R6, R8, R9, R10, R11, R12 |
18 | R5 | 1 | 47k Ω, SMD0805 | 541-47000ATR-ND | |
19 | U1 | 1 | Socket: IC357-1004-53N | Manuf.: Yamaichi | |
20 | PCB | 1 | 90 x 82 mm | 2 layers | |
21 | Rubber standoff | 4 | Select appropriate | Apply to corners at bottom side | |
22 | MSP430 | 2 | MSP430F5438IPZ | DNP: Enclosed with kit supplied by TI |