SLAU278AH May 2009 – March 2021
Pos. | Ref Des | No. per Board | Description | Digi-Key Part No. | Comment |
---|---|---|---|---|---|
1 | C1, C2, | 0 | 12pF, SMD0805 | DNP | |
2 | C3 | 0 | 2.2nF, SMD0805 | DNP | |
3 | C6, | 1 | 10uF, 10V, Tantal Size B | 511-1463-2-ND | |
4 | C4, C5 | 2 | 100nF, SMD0805 | 478-3351-2-ND | |
5 | D1 | 1 | green LED, SMD0805 | P516TR-ND | |
6 | J1, J2, J3, J4 | 0 | 16-pin header, TH | DNP: Headers and receptacles enclosed with kit. Keep vias free of solder. | |
SAM1029-16-ND | : Header | ||||
SAM1213-16-ND | : Receptacle | ||||
7 | J5, JP3, JP4, JP5, JP6, JP7, JP8, JP9 | 8 | 3-pin header, male, TH | SAM1035-03-ND | |
8 | JP1, JP2 | 2 | 2-pin header, male, TH | SAM1035-02-ND | Place jumper on header |
9 | 2 | Jumper | 15-38-1024-ND | Place on: J6, J7 | |
10 | JTAG | 1 | 14-pin connector, male, TH | HRP14H-ND | |
11 | BOOTST | 0 | 10-pin connector, male, TH | DNP: Keep vias free of solder | |
12 | Q1 | 0 | Crystal | Micro Crystal MS1V-T1K 32.768kHz, C(Load) = 12.5pF | DNP: Keep vias free of solder |
13 | R3, R6 | 2 | 330 Ω, SMD0805 | 541-330ATR-ND | |
14 | R1, R2, R5, R7, R9, R10, R11, R13, R14 | 2 | 0 Ω, SMD0805 | 541-000ATR-ND | DNP: R5, R7, R9, R10, R11, R13, R14 |
15 | R4 | 1 | 47k Ω, SMD0805 | 541-47000ATR-ND | |
16 | U1 | 1 | Socket: IC51-0644-807 | Manuf.: Yamaichi | |
17 | PCB | 1 | 78 x 75 mm | 4 layers | |
18 | Rubber stand off | 4 | select appropriate | Apply to corners at bottom side | |
19 | MSP430 | 2 | MSP430F4152IPM | DNP: Enclosed with kit supplied by TI |