SLAU318G July   2010  – March 2016

 

  1.   MSP-EXP430G2 LaunchPad™ Development Kit
    1.     Trademarks
    2. 1 Preface: Read This First
      1. 1.1 If You Need Assistance
      2. 1.2 Related Documentation From TI
    3. 2 MSP-EXP430G2 LaunchPad™ Development Kit Overview
      1. 2.1 Overview
      2. 2.2 Features
      3. 2.3 Kit Contents
      4. 2.4 Revisions
    4. 3 Installation
      1. 3.1 Download the Required Software
      2. 3.2 Install the Software
      3. 3.3 Install the Hardware
    5. 4 Getting Started With MSP-EXP430G2 LaunchPad™ Development Kit
      1. 4.1 Getting Started
      2. 4.2 Demo Application, Internal Temperature Measurement
    6. 5 Develop an Application With the MSP-EXP430G2 LaunchPad™ Development Kit
      1. 5.1 Developing an Application
      2. 5.2 Program and Debug the Temperature Measurement Demo Application
      3. 5.3 Disconnect Emulator From Target With Jumper J3
      4. 5.4 Program Connected eZ430™ Target Boards
      5. 5.5 Connecting a Crystal Oscillator
      6. 5.6 Connecting a BoosterPack™ Plug-in Module
      7. 5.7 Supported Devices
      8. 5.8 MSP-EXP430G2 On-Board Emulator
    7. 6 MSP-EXP430G2 Hardware
      1. 6.1 Device Pinout
      2. 6.2 Schematics
      3. 6.3 PCB Layout
      4. 6.4 Bill of Materials (BOM)
    8. 7 Suggested Reading
    9. 8 Frequently Asked Questions (FAQ)
  2.   Revision History

Trademarks

MSP430, E2E, Code Composer Studio, LaunchPad, BoosterPack, eZ430 are trademarks of Texas Instruments.

IAR Embedded Workbench is a trademark of IAR Systems.

All other trademarks are the property of their respective owners.