Conversion Rate.
This field specifies the relative sample rate of the ADC and is used in run, sleep, and deep-sleep modes.
It allows the application to reduce the rate at which conversions are generated relative to the maximum conversion rate.
0x0 = Reserved
0x1 = Eighth conversion rate. After a conversion completes, the logic pauses for 112 TADC periods before starting the next conversion.
0x2 = Reserved
0x3 = Quarter conversion rate. After a conversion completes, the logic pauses for 48 TADC periods before starting the next conversion.
0x4 = Reserved
0x5 = Half conversion rate. After a conversion completes, the logic pauses for 16 TADC periods before starting the next conversion.
0x6 = Reserved
0x7 = Full conversion rate (FCONV) as defined by TADC and NSH.
0x8 = Reserved
0x9 = Reserved
0xA = Reserved
0xC = Reserved
0xD = Reserved
0xE = Reserved
0xF = Reserved
|