SLAU723A October 2017 – October 2018 MSP432E401Y , MSP432E411Y
1-Wire Software Reset (SROWIRE)
The SROWIRE register lets software reset the available 1-Wire Module.
A peripheral is reset by software using a simple 2-step process:
There may be latency from the clearing of the SROWIRE bit to when the peripheral is ready for use. Software should check the corresponding PROWIRE bit to verify that the 1-Wire module registers are ready to be accessed.
NOTE
Use this register to reset the 1-Wire controller modules.
SROWIRE is shown in Figure 4-89 and described in Table 4-96.
Return to Summary Table.
| 31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 |
| RESERVED | |||||||||||||||
| R-0x0 | |||||||||||||||
| 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
| RESERVED | R0 | ||||||||||||||
| R-0x0 | R/W-0x0 | ||||||||||||||