SLAU857A May 2021 – July 2021 MSP430FR2476 , MSP430FR2512 , MSP430FR2522 , MSP430FR2532 , MSP430FR2533 , MSP430FR2632 , MSP430FR2633 , MSP430FR2672 , MSP430FR2673 , MSP430FR2675 , MSP430FR2676
Term | Definition |
---|---|
Base capacitance | The parasitic capacitance of the sensor before the finger touches it |
BSL | Bootloader |
CAP I/O | A pin on an MSP430™ MCU that is dedicated to the capacitive touch function |
CapTIvate | TI’s capacitive touch design system |
FRAM | Ferroelectric RAM (also FeRAM or F-RAM) |
GUI | Graphical user interface |
IDE | Integrated development environment |
JTAG | JTAG (named after the Joint Test Action Group) is an industry standard for verifying designs, testing printed circuit boards programming and debugging after manufacture |
LPM0, LPM3, LPM4 | Different low-power modes of MSP430 MCUs. For specific power consumption, see the device-specific data sheet. |
MSP | Mixed signal processor |
NVM | Nonvolatile memory |
Rx | In mutual-capacitance mode or self-capacitance mode, the pin or electrode responsible for charging from the parasitic capacitance to the internal reference capacitance of the MCU. |
SBW | 2-wire Spy-Bi-Wire interface, a typical JTAG interface for MSP430 MCUs |
Tx | In mutual-capacitance or self-capacitance mode, the pin or electrode responsible for charging the parasitic capacitance. |