SLAU858A november   2021  – june 2023

 

  1.   1
  2.   AFE881H1 Evaluation Module
  3.   Trademarks
  4. 1Overview
    1. 1.1 Kit Contents
    2. 1.2 Related Documentation From Texas Instruments
  5. 2USB2ANY Interface Adapter
    1. 2.1 Signal Definitions for J10
    2. 2.2 USB2ANY Theory of Operation
  6. 3EVM Hardware Overview
    1. 3.1 Electrostatic Discharge Caution
    2. 3.2 EVM Block Diagram
    3. 3.3 EVM Jumper Summary
    4. 3.4 Terminal and Pin Definitions
    5. 3.5 Connecting the USB2ANY
    6. 3.6 Connecting the USB Cable to the USB2ANY Interface Adapter
    7. 3.7 Optional EVM Operations
      1. 3.7.1 Power Configuration
      2. 3.7.2 External SPI and UART Controllers
  7. 4Software Overview
    1. 4.1 Software Installation
    2. 4.2 Launching the Software
    3. 4.3 Software Features
      1. 4.3.1 AFE881H1 Register Page
      2. 4.3.2 High Level Configuration Page
      3. 4.3.3 Using the Python Scripting Tool
  8. 5Schematics, PCB Layout, and Bill of Materials
    1. 5.1 Board Schematic
    2. 5.2 PCB Components Layout
    3. 5.3 Bill of Materials
  9. 6Revision History

1.2 Related Documentation From Texas Instruments

The documents in Table 1-2 provides information regarding Texas Instruments integrated circuits used in the assembly of the AFE881H1EVM. This user's guide is available from the TI web site under literature number SLAU858. Any letter appended to the literature number corresponds to the document revision that is current at the time of the writing of this document. When released, newer revisions are available from the TI web site at www.ti.com, or call the Texas Instruments Literature Response Center at (800) 477-8924 or the Product Information Center at (972) 644-5580. When ordering, identify the document by both title and literature number.

Table 1-2 Related Documentation
Document Literature Number
AFE881H1 product data sheet SLASEU7
USB2ANY interface adapter user's guide SNAU228
REF3312 product data sheet SBOS392
SN74LVC8T245 product data sheet SCES584
SN74LVC2T45 product data sheet SCES516

Download the latest version of the EVM graphical user interface (GUI) installer from the Order and start development subsection of the AFE881H1EVM web folder on TI.com. Run the GUI installer to install the EVM GUI software on your personal computer (PC).