SLAU909A September 2023 – December 2023 ULC1001
The Camera Module contains three circuit boards. From front to back, these boards are the camera module, the driver board, and a connector board for passing all signals. The device has two ports on the back: one Micro-USB for the camera and one USB-C for passing power and Inter-Integrated Circuit (I2C) communication to the driver board. The Micro-USB can optionally be connected to a Windows 10 PC. ULC-HPB-DEMO can run on the native Windows Camera app without downloading and installing additional software. The USB-C needs to be connected to the Switch Box.
The switch box controls the ultrasonic lens cleaning in the camera module. The barrel jack plugs into the supplied switching adapter. The USB-C output plugs into the camera module.
The additional hardware includes: