SLAU913 august   2023 AFE539A4

 

  1.   1
  2.   Description
  3.   Get Started
  4.   Features
  5.   Applications
  6.   6
  7. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specification
    4. 1.4 Device Information
  8. 2Hardware
    1. 2.1 Hardware Description
      1. 2.1.1 Theory of Operation
        1. 2.1.1.1 Signal Definitions
    2. 2.2 Hardware Setup
      1. 2.2.1 Electrostatic Discharge Caution
      2. 2.2.2 Power Configurations and Jumper Settings
      3. 2.2.3 Connecting the Hardware
  9. 3Software
    1. 3.1 Software Setup
      1. 3.1.1 Operating Systems
      2. 3.1.2 Software Installation
    2. 3.2 Software Description
      1. 3.2.1 Starting the Software
      2. 3.2.2 Software Features
        1. 3.2.2.1 High Level Configuration Page
        2. 3.2.2.2 Low Level Configuration Page
  10. 4Hardware Design Files
    1. 4.1 Schematic
    2. 4.2 PCB Layout
    3. 4.3 Bill of Materials
  11. 5Additional Information
    1.     Trademarks
  12. 6Related Documentation from Texas Instruments

Kit Contents

The table below details the contents of the EVM kit. Contact the nearest TI Product Information Center if any component is missing. Verify the latest versions of the related software at the Texas Instruments website, www.ti.com.

Table 1-1 Contents of AFE539A4EVM Kit
ItemQuantity
AFE539A4EVM PCB1
USB micro-B plug to USB-A plug cable1
Table 1-2 Optional Components Not Included With Kit
ItemQuantity
SmartDAC-DIY-EVM - breakout board for AFE539A4EVM1

These optional components are available for purchase from the Texas Instruments website at www.ti.com.