SLAU916 May   2024

 

  1.   1
  2.   Description
  3.   Getting Started
  4.   Features
  5.   Applications
  6.   6
  7. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specification
    4. 1.4 Device Information
  8. 2Hardware
    1. 2.1 Hardware Setup
      1. 2.1.1 Hardware Theory of Operation
      2. 2.1.2 Jumper Definitions
      3. 2.1.3 Connector Definitions
      4. 2.1.4 Test Points
    2. 2.2 Hardware Overview
      1. 2.2.1 Connecting the FT4232 Digital Controller
      2. 2.2.2 SPI Configuration
      3. 2.2.3 I2C Configuration
      4. 2.2.4 Glitch Testing
  9. 3Software
    1. 3.1 Software Setup
      1. 3.1.1 Software Installation
    2. 3.2 Software Overview
      1. 3.2.1 Launching the Software
    3. 3.3 Software Features
      1. 3.3.1 Low Level Configuration Page
      2. 3.3.2 High Level Configuration Page
  10. 4Hardware Design Files
    1. 4.1 Schematics
    2. 4.2 PCB Layouts
    3. 4.3 Bill of Materials
  11. 5Additional Information
    1. 5.1 Trademarks
  12. 6Related Documentation

6 Related Documentation

The documents in Table 7-1 provide information regarding Texas Instruments integrated circuits used in the assembly of the DAC80516EVM. This user's guide is available from the TI web site under literature number SLAU916. Any letter appended to the literature number corresponds to the document revision that is current at the time of the writing of this document. Newer revisions are available from the TI web site at www.ti.com, or call the Texas Instruments Literature Response Center at (800) 477-8924 or the Product Information Center at (972) 644-5580. When ordering, identify the document by both title and literature number.

Table 6-1 Related Device Documentation
DocumentLiterature Number
DAC80516 product data sheetSLASF62