SLAU919A November   2023  – June 2024

 

  1.   1
  2.   Description
  3.   Get Started
  4.   Features
  5.   Applications
  6.   6
  7. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specification
    4. 1.4 Device Information
  8. 2Hardware
    1. 2.1 Hardware Setup
      1. 2.1.1 Hardware Theory of Operation
      2. 2.1.2 Jumper Definitions
      3. 2.1.3 Connector Definitions
      4. 2.1.4 Test Points
    2. 2.2 Hardware Overview
      1. 2.2.1 Electrostatic Discharge Caution
      2. 2.2.2 Connecting the FTDI Digital Controller
      3. 2.2.3 SPI Configuration
      4. 2.2.4 I2C Configuration
  9. 3Software
    1. 3.1 Software Setup
      1. 3.1.1 Software Installation
    2. 3.2 Software Overview
      1. 3.2.1 Launching the Software
      2. 3.2.2 Software Features
        1. 3.2.2.1 Low Level Configuration Page
        2. 3.2.2.2 High Level Configuration Page
  10. 4Hardware Design Files
    1. 4.1 Schematics
    2. 4.2 PCB Layout
    3. 4.3 Bill of Materials
  11. 5Additional Information
    1. 5.1 Trademarks
  12. 6Related Documentation
  13. 7Revision History

Test Points

The DAC80502-01EVM has a variety of test points available for measuring and debugging purposes. Table 3-5 explains the purpose of each test point.

Table 2-5 DAC80502-01EVM Test Points
Test Point Net Description
TP1 3p3V

Onboard 3.3V supply

TP2 1p8V

Onboard 1.8V supply

TP3

5V_USB

Onboard USB 5V supply

TP4

AD6

FTDI Trigger test point (unpopulated)

TP5, TP6, TP7, TP8

GND

Ground test points

TP9 VDD

VDD test point

TP10

VREF_2

DAC80502 reference test point

TP11

VREF_1

DAC80501 reference test point

TP12

GND

Dedicated ground test point for measuring VOUT noise

TP14

VOUT

Dedicated DAC80501 VOUT test point for measuring VOUT noise