SLAU938 March   2024 ISOM8610

 

  1.   1
  2.   Description
  3.   Features
  4.   4
  5. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specification
    4. 1.4 Device Information
  6. 2Hardware
    1. 2.1 EVM Setup and Operation
    2. 2.2 Pin Configuration of the ISOM8610 Normally Open Opto-emulator Switch with Integrated FET Output
  7. 3Hardware Design Files
    1. 3.1 Schematics
    2. 3.2 PCB Layout and 3D Diagram
    3. 3.3 Bill of Materials
  8. 4Additional Information
    1. 4.1 Trademarks

Features

  • Platform for complete evaluation of the ISOM8610DFG
  • Test points and jumper options
  • Passives and footprints for basic modifications included
  • Drop-in upgradable and pin-compatible for popular OptoMOS optocouplers and solid-state relays
  • One channel diode-emulator input
  • Low input ON=state forward current: at IF(ON) = 0.8mA - 20mA
  • Output continuous load current: IO = 150mA
  • High blocking voltage: VOFF = 80V
  • Robust isolation barrier