SLLU303A August   2019  – March 2022 TLIN1028-Q1 , TLIN1028S-Q1

 

  1.   Trademarks
  2. 1Introduction
    1. 1.1 Features
    2. 1.2 Description
  3. 2EVM Setup and Requirements
    1. 2.1 Commander Mode
    2. 2.2 Responder Mode
    3. 2.3 TXD and RXD
    4. 2.4 VCC Load Testing
    5. 2.5 LED Indication
  4. 3Schematic and Bill of Materials
    1. 3.1 Schematic
    2. 3.2 Bill of Materials
  5. 4Revision History

2.1 Commander Mode

To configure the board for commander mode, place a shunt on J8 to connect the external 1-kΩ resistor and series diode to the LIN bus per the LIN specification.