SLLU359A december   2022  – may 2023

 

  1.   1
  2.   Abstract
  3.   Trademarks
  4. 1Cautions and Warnings
  5. 2Introduction
  6. 3Quick Start Guide
  7. 4Hardware and Software Overview
    1. 4.1 Hardware Connections Overview – MCT8329EVM
    2. 4.2 Connection Details
    3. 4.3 MSP430FR2355 Microcontroller & User Interface
    4. 4.4 LED Lights
    5. 4.5 User-Configurable Settings
  8. 5Hardware Setup
  9. 6MCT8329 GUI Application
    1. 6.1 Running the GUI
    2. 6.2 Offline Installer
  10. 7MSP430FR2355 Interface Firmware
    1. 7.1 Downloading Code Composer Studio and Importing MSP430FR2355 Interface Firmware Code
    2. 7.2 Using the eZ-FET to Program the MSP430FR2355
  11. 8Schematics
    1. 8.1 Main Supply
    2. 8.2 Connectors and Interface
    3. 8.3 USB to UART
    4. 8.4 MCU Programming and Debug
    5. 8.5 MSP430FR2355 MCU
    6. 8.6 MCT8329 3-Phase Sensorless Trapezoidal Gate Driver
    7. 8.7 Status LEDs
    8. 8.8 Switches and Speed Input
  12. 9Revision History

MSP430FR2355 Interface Firmware

The MSP430FR2355 on the MCT8329EVM comes pre-programmed with the firmware necessary for communicating with the PC GUI and the MCT8329. In order to reprogram or flash custom code on the MSP430FR2355, you will need an external MSP430 LaunchPad™that includes the eZ-FET Debug Probe. In this example, we use the MSP-EXP430FR2355 LaunchPad Development Kit to provide the debug probe. Follow the steps below to download the code for the MCT8329EVM to use with the GUI.