SLUUCB9A June 2020 – January 2021 BQ25730 , BQ25731
The following list of equipment is required for fully testing the EVM:
A power supply capable of supplying 26 V at 10 A is required. While this part can handle larger voltage and current, it is not necessary for this procedure.
A 0- to 23-V/0- to 15-A, system DC electronic load and setting as constant current load mode.
A Kepco load: BOP36-12M, DC 0 to ±36 V, 0 to ±12 A (or higher), or equivalent.
Six Fluke 75 multimeters, (equivalent or better) or: Four equivalent voltage meters and two equivalent current meters.
A computer with at least one USB port and a USB cable.
Download and properly install BQstudio from http://www.ti.com/tool/BQstudio.