SLUUCK7 October   2021 LMR54410

 

  1.   Trademarks
  2. 1Introduction
  3. 2Setup
    1. 2.1 Input/Output Connector Description
    2. 2.2 Adjusting the Output Voltage
  4. 3 LMR54410EVM Schematic
  5. 4Board Layout
  6. 5Bill of Materials

2.2 Adjusting the Output Voltage

If other outputs need to be configured, leave jumper J1 unconnected and adjust the feedback resistors using the Equation 1.

Equation 1. VOUT = VREF × ( 1 + ( R4 / R5 ) )

where

  • VREF is 0.8 V.