SLUUCT5 October   2023

 

  1.   1
  2.   Description
  3.   Get Started
  4.   Features
  5.   Applications
  6.   6
  7. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specification
    4. 1.4 Device Information
  8. 2Hardware
    1. 2.1 Additional Images
    2. 2.2 Hardware Description
      1. 2.2.1 I/O Description
  9. 3Implementation Results
    1. 3.1 Electrical Specifications
    2. 3.2 Test Summary
      1. 3.2.1 Definitions
      2. 3.2.2 Equipment
        1. 3.2.2.1 Power Supply
        2. 3.2.2.2 Function Generator
        3. 3.2.2.3 DMM
        4. 3.2.2.4 Oscilloscope
      3. 3.2.3 Equipment Setup
        1. 3.2.3.1 DC Power Supply Settings
        2. 3.2.3.2 Digital Multi-Meter Settings
        3. 3.2.3.3 Two-Channel Function Generator Settings
        4. 3.2.3.4 29
        5. 3.2.3.5 Oscilloscope Settings
        6. 3.2.3.6 Bench Setup Diagram
    3. 3.3 Power Up and Power Down Procedure
      1. 3.3.1 Power Up
      2. 3.3.2 Power Down
    4. 3.4 Typical Performance Waveforms (CL = 1800 pF)
      1. 3.4.1 Propagation Delays
  10. 4Hardware Design Files
    1. 4.1 Schematic
    2. 4.2 PCB Layouts
    3. 4.3 Bill of Materials
  11. 5Additional Information
    1.     Trademarks

3.3.2 Power Down

Use the following steps to power down the EVM:

  1. Disable function generator.
  2. Disable power supply #1.
  3. Disconnect cables and probes.