SLUUD26A April   2024  – May 2024 UCC21231

 

  1.   1
  2.   Description
  3.   Features
  4.   4
  5. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specification
    4. 1.4 Device Information
  6. 2Hardware
    1. 2.1 Power Requirements
    2. 2.2 Header Information
    3. 2.3 Jumper Information
    4. 2.4 Test Points
  7. 3Hardware Design Files
    1. 3.1 Schematics
    2. 3.2 PCB Layouts
    3. 3.3 Bill of Materials (BOM)
  8. 4Additional Information
    1. 4.1 Trademarks

1.1 Introduction

The UCC21231AEVM-108 evaluation module is designed for evaluating TI’s UCC21231A gate driver. The UCC21231A is a 1.6kVrms isolated dual-channel gate driver with 4A source and 6A sink peak current for driving Si MOSFETs, IGBTs and WBG devices such as SiC and GaN transistors. This user's guide provides a complete EVM schematic diagram, printed circuit board layout, bill of materials, test setup, and feature descriptions for the UCC21231A. TI recommends that users read the data sheet (SLUSF46) thoroughly before switching the part in the EVM covered by this user's guide.