SLVA888C April   2017  – January 2021 TPS65987D , TPS65988

 

  1.   Trademarks
  2. 1Schematic Design Guidelines
    1. 1.1  Power Supply Scheme
      1. 1.1.1 VIN_3V3
      2. 1.1.2 LDO_3V3
      3. 1.1.3 LDO_1V8
    2. 1.2  Boot Configuration
      1. 1.2.1 BUSPOWER (ADCIN1)
      2. 1.2.2 External SPI Flash
    3. 1.3  I2C Interface
      1. 1.3.1 I2C Pin Address Setting (ADCIN2)
    4. 1.4  HRESET
    5. 1.5  Configuration Channel / VCONN Lines
      1. 1.5.1 PP_CABLE
    6. 1.6  Battery Charger Detection and Advertisement (BC1.2)
    7. 1.7  GPIOs
    8. 1.8  Hot Plug Detect or HPD Line
    9. 1.9  PP_EXT Power Path Control
    10. 1.10 Power Path Considerations
  3. 2Layout Guidelines
    1. 2.1 Power Domain
    2. 2.2 Hi Speed Lines
    3. 2.3 Other Considerations
  4. 3Summary
  5. 4References
  6.   A Appendix
    1.     A.1 Dead Battery Considerations
    2.     A.2 TPS65987DDH Schematic Checklist
    3.     A.3 TPS65987DDH System Checklist
  7.   Revision History

1.6 Battery Charger Detection and Advertisement (BC1.2)

This device has 2 USB lines which can be used for BC1.2 detection, or as standard GPIOs. Connect these pins to USB 2.0 lines and at the same time use these pins for BC1.2 detection. If lines are not used, any event can be assigned to the lines for BC 1.2 detection.