SLVU942A July   2013  – August 2021 TPS54626

 

  1.   Trademarks
  2. 1Introduction
  3. 2Performance Specification Summary
  4. 3Modifications
    1. 3.1 Output Voltage Set Point
  5. 4Test Setup and Results
    1. 4.1  Input/Output Connections
    2. 4.2  Start Up Procedure
    3. 4.3  Efficiency
    4. 4.4  Light Load Efficiency
    5. 4.5  Load Regulation
    6. 4.6  Line Regulation
    7. 4.7  Load Transient Response
    8. 4.8  Output Voltage Ripple
    9. 4.9  Input Voltage Ripple
    10. 4.10 Start-Up
    11. 4.11 Shut-Down
  6. 5Board Layout
    1. 5.1 Layout
  7. 6Schematic, Bill of Materials and Reference
    1. 6.1 Schematic
    2. 6.2 Bill of Materials
    3. 6.3 Reference
  8. 7Revision History

4.8 Output Voltage Ripple

The TPS54626EVM-608 output voltage ripple is shown in Figure 4-7, Figure 4-8, and Figure 4-9. The output currents are as indicated.

GUID-0AEA9C52-82E1-4775-A2BE-3ED4203856E6-low.gif Figure 4-7 TPS54626EVM-608 Output Voltage Ripple, IOUT = 6.5 A
GUID-71277D49-E299-47DA-8199-079A4BA79374-low.gif Figure 4-8 TPS54626EVM-608 Output Voltage Ripple, IOUT = 300 mA
GUID-ED1E8E70-991E-4179-B8D2-6450630DDB81-low.gif Figure 4-9 TPS54626EVM-608 Output Voltage Ripple, IOUT = 10 mA