SLVUCB6 User guide

SLVUCB6 September 2021 TPS22998

4.1 Setup

This section describes the jumpers and connectors on the EVM as well as how to properly connect, set up, and use the EVM. Table 4-1 describes the input and output connectors and jumpers. Table 4-2 describes the different test points and functionality. Table 4-3 describes the jumper functionality and configurations.

Table 4-1 TPS22998EVM Input and Output Connector Functionality

Input	Connector and Test Point	Label	Description
VIN	J1	J1	Input banana connector for VIN
	TP1	VIN	Input test point for VIN
	TP2	VIN SNS	Sense test point for VIN
VOUT	J3	J3	Output banana connector for VOUT
	TP3	VOUT Sense	Sense test point for VOUT
	TP4	VOUT	Output test point for VOUT
GND	TP7, TP8, TP9, TP10	GND	Test point for GND
GND	J2, J4	J2, J4	Banana connector for GND

Table 4-2 TPS22998EVM Test Point Description

Pin	Test Point	Label	Description
ON	TP6	ON	Enable signal test point
VBIAS	TP5	VBIAS	Bias Voltage test point

Table 4-3 TPS22998EVM Jumper Configuration

Input	Jumper	Label	Description
VIN	JP1	ON	Position 1 and 2 sets ON-pin HI Position 2 and 3 sets ON-pin LO
VIN	JP2	VBIAS	BIAS voltage pull up to VIN
CT	JP3	CT	Position 1 and 2 sets CT-pin HI Position 2 and 3 sets CT-pin LO