SLVUCG9 October   2022 TPS36-Q1

 

  1.   Abstract
  2. 1Trademarks
  3. 2Introduction
    1. 2.1 Related Documentation
  4. 3Schematic, Bill of Materials, and Layout
    1. 3.1 TPS36Q1EVM Schematic
    2. 3.2 TPS36Q1EVM Bill of Materials
    3. 3.3 Layout and Component Placement
  5. 4EVM Connectors
    1. 4.1 EVM Jumpers
    2. 4.2 EVM Test Points
  6. 5EVM Setup and Operation
    1. 5.1 Input Power (VDD)
    2. 5.2 RESET
    3. 5.3 Manual Reset (MR)
    4. 5.4 SET0 and SET1
    5. 5.5 Watchdog Enable (WD_EN)
    6. 5.6 Watchdog Input (WDI)
    7. 5.7 Watchdog Output (WDO)
    8. 5.8 CRST
    9. 5.9 CWD
  7. 6EVM Performance Results
  8. 7Revision History

5 EVM Setup and Operation

This section describes the functionality and operation of the TPS36Q1EVM. Even though this EVM comes with the TPS3436CCCBGDDFRQ1 variant, this section will cover the EVM utilization with the TPS36-Q1, TPS35-Q1, and TPS3435-Q1 installed on the board. All timing based parameters of this device are located in the respective device's datasheet.