SLVUCM1 December   2022 TPS552892

 

  1.   TPS552892EVM-111 Evaluation Module
  2.   Trademarks
  3. 1Introduction
    1. 1.1 Performance Specification
    2. 1.2 Modification
  4. 2Connector, Test Point and Jumper Descriptions
    1. 2.1 Connector and Test Point Descriptions
    2. 2.2 Jumper Configuration
      1. 2.2.1 JP1 (ENABLE)
      2. 2.2.2 JP5(SYNC)
      3. 2.2.3 JP6 (MODE)
      4. 2.2.4 JP7 (EXTVCC)
  5. 3Test Procedure
  6. 4Schematic, Bill of Materials, and Board Layout
    1. 4.1 Schematic
    2. 4.2 Bill of Materials
    3. 4.3 Board Layout

2.2.3 JP6 (MODE)

MODE pin input jumper. Place a jumper across MODE and VCC to set in forced PWM mode, place a jumper across MODE and GND to set in auto PFM mode.