SLVUCN2A October   2023  – August 2024 DRV3901-Q1

 

  1.   1
  2.   Abstract
  3.   Trademarks
  4. 1Introduction
  5. 2Hardware Overview
    1. 2.1 Connectors and Configuration Headers
    2. 2.2 Signal Test Points
    3. 2.3 LED Indicators
  6. 3EVM GUI Control Application
    1. 3.1 MSP430 FET Drivers
    2. 3.2 Cloud-based GUI
    3. 3.3 Local Installation
  7. 4EVM GUI Operation
    1. 4.1 Hardware Set-up
    2. 4.2 Launching the DRV3901-Q1EVM GUI Application
  8. 5GUI Overview
    1. 5.1 Programming the EVM
    2. 5.2 Saving and Loading Register Configurations
    3. 5.3 Scripting Window
  9. 6Pyro Fuse SPI Modes
    1. 6.1 Stand-alone SPI
    2. 6.2 Addressable SPI
  10. 7Revision History

5.2 Saving and Loading Register Configurations

The DRV3901-Q1EVM GUI has a built-in feature to save the current register configurations as a .json file that can be loaded to the GUI. The following steps outline the procedure for saving and loading register configurations.

  1. After writing desired register values, Click on "File" tab and "Save Registers". A save file pop-up window will appear to name and save the .json file.
  2. To recall register configurations, click on "File" tab and "Load Registers". Select the saved .json file to load register values.
DRV3901-Q1 Save and Load Register Menu Figure 5-4 Save and Load Register Menu