SLVUCN5B July   2023  – July 2024 TPS7H6003-SP

 

  1.   1
  2.   Description
  3.   Features
  4.   Applications
  5.   5
  6. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specification
    4. 1.4 Device Information
  7. 2Hardware
    1. 2.1 Power Requirements
    2. 2.2 Best Practices
      1.      General Texas Instruments High Voltage Evaluation (TI HV EVM) User Safety Guidelines
  8. 3Implementation Results
    1. 3.1 Evaluation Setup
    2. 3.2 Performance Data and Results
  9. 4Hardware Design Files
    1. 4.1 Schematics
    2. 4.2 PCB Layouts
    3. 4.3 Bill of Materials (BOM)
  10. 5References
  11. 6Revision History

Evaluation Setup

The information in this section was obtained with the following set-up

Name Connector Voltage
Input voltage (+) J1 100V
Input voltage (-) J2 0V
EN_HI J3 Shorted
PWM_LI J10 Shorted
PWM_LI J9[1:2] 0-5 V at 500kHz/30 % duty cycle signal