SLVUCS6 August 2024 TPS65987DDK
The TPS65987DDK is a single-port USB Type-C and Power Delivery (PD) controller providing cable plug and orientation detection at the USB Type-C connector. Upon cable detection, the TPS65987DDK communicates on the CC wire using the USB PD protocol. When cable detection and USB PD negotiation are complete, the TPS65987DDK device enables the appropriate power path and configures alternate mode settings for external multiplexers. The TPS65987DDK device has two internal power paths that can be source or sink with current rating up to 5A.
For more details on each device on the TPS65987DDKEVM, refer to Table 1-1.
Additionally, the EVM is equipped with a TIVA chip for flashing a new project through SPI or I2C and for debugging and development. The EVM is customizable through the TPS65987DDK Application Customization Tool. For information on how to configure the EVM, refer to the (TPS6598x Application Customization Tool user's guide).
Designator | Device Name | Description |
---|---|---|
U1 |
TPS65987DDK | USB Type-C PD controller |
U2 |
TPD6S300 | USB Type-C Port protector |
U3 |
TPD2E009 | Dual ESD protection diode with 5A surge rating |
U4 |
TM4C123GH6PM | TIVA MCU, used in conjunction with GUI to flash EVM |
U5 |
W25Q80DVS | 8M-bit serial flash memory |
U6 |
TLV1701 | Comparator for external power path |
U7, U9 |
TVS2200 | 22V precision surge protection clamp |
U8 |
LM3489 | Variable DC/DC converter for 5V, 9V, 15V, 20V |
U10 |
TPS54334 | Buck converter for 3.3V |
U11 |
TLV3012AI | Low-power comparator for barrel jack detection |
U12 |
TPS2500 | Boost converter for 5V |
U13 |
TPS76833 | Low-dropout voltage regulator for 3.3V |